Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 – 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Press travel: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping (top) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data comes from the original offer. Gbedpszzkwgefx Aciot No guarantee is given for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, operating hours: 15,396 h, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, No minimum price – guaranteed sale to the highest bidder! TRUMPF TruBend 5170 including BendMaster! The machine has been continuously serviced and maintained by Trumpf, with a complete service record. The cylinders are leak-proof and have no oil loss. The tools shown for the robot are included. TECHNICAL DETAILS Stroke: 500 mm Press force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, top and bottom Number of axes: 6 Load capacity: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Gjdpjzzkvcefx Aciobt Frequency: 50 Hz Connected power: 28.0 kVA Control voltage: 24 V DC Follow-up time: max. 90 ms Follow-up distance at 220 mm/s: max. 10 mm Follow-up distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg Operating hours Press beam running time: 15,396 h Hydraulic system running time: 83,212 h Machine operating hours: 152,638 h EQUIPMENT CE marking Documentation/Manual Rear stop with sensors CNC crowning Bendmaster (robot with 8 m travel) Vacuum manipulators CNC gripping station Double sheet detection BendGuard laser safety device Spare parts: Cable carrier, spare vacuum plate, BWF fixators (machine feet) The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If collection is not completed within the specified timeframe, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No guarantee is given for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on-site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Gedpfx Aszzbafjciebt Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 73.331.611.504, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 175 t, stroke length: 265 mm, throat depth: 450 mm, working width: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Max. working width: 3,050 mm Frame distance: 2,600 mm Overhang: 450 mm Max. stroke: 265 mm Crowning system: CNC-controlled Number of axes: 3 Axes: Y1, Y2, X Back gauge depth: 1,000 mm Ram holder: Standard Tool holder type: European Style MACHINE DETAILS Drive system: CNC Control system: Durma Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 4,250 x 1,950 x 2,700 mm Weight: 10,520 kg Gedpszxcf Refx Acijbt Transport packages: 1 EQUIPMENT Tools CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Control: Conventional Power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT Godpfx Acszza U Ueisbt CE marking

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 91.898, functionality: fully functional, pressing force: 100 t, stroke length: 120 mm, throat depth: 250 mm, controller model: HACO ATL 565, working width: 3,600 mm, TECHNICAL DETAILS Gbjdpjzxdxxefx Acist Press force: 100 t Max. working width: 3,600 mm Frame spacing: 3,300 mm Overhang: 250 mm Max. stroke: 120 mm Back gauge depth: 600 mm Crowning system: Mechanical MACHINE DETAILS Drive system: CNC Control system: HACO ATL 565 Number of axes: 3 (Y1 + Y2 + X) Dimensions & Weight Dimensions (L x W x H): 4,800 x 1,800 x 2,250 mm Weight: 8,200 kg Transport packages: 2 EQUIPMENT Mechanical crowning system Quick-release die holder Tool holder in European style Tools CE marking

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, pressing force: 100 t, stroke length: 100 mm, throat depth: 400 mm, overall weight: 6,000 kg, working length: 3,000 mm, TECHNICAL DETAILS Axes: 5 Pressing force: 1,000 kN (100 t) Maximum bending length: 3,000 mm Distance between side supports: 2,600 mm Overhang: 400 mm Stroke: 100 mm Installation height: 370 mm Number of cylinders: 2 Rapid traverse: approx. 85 mm/s Working speed: 10 mm/s Return speed: approx. 80 mm/s MACHINE DETAILS Oil filling capacity: approx. 85 l Motor power: approx. 10 kW Gbedjzxnggspfx Acist Dimensions & Weight Dimensions (L x W x H): approx. 3,300 x 1,930 x 2,325 mm Machine weight: approx. 6,000 kg

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 13,979 h, machine/vehicle number: A3231E0532, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 4,541 h, laser power: 24,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 60 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 24 kW (2023) High-spec 2D fiber laser cutting machine, one owner from new. 3000 x 1500 mm working area. Siemens Sinumerik 840D SL control with 21.5" multi-touch display. In daily production and under TRUMPF maintenance contract from new. Key data Machine No.: A3231E0532 Year of manufacture: 09/2023 Laser source: TruDisk 24001 (external, separate energy supply) Laser power: 24,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 60 mm / stainless 60 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight: 7,650 kg Supply: 400 V 3~ / 50 Hz, 22.0 kVA, 3 x 63 A Hours: 13,979 h operating / 4,541 h laser-on Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (right). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle cleaning. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Mild steel slats, 67 mm spacing. Slag cart under pallet changer. Cleaning brush. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Automatic nozzle centring. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK 840D SL. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Nanojoints. Oseon Go. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package, gas mix cutting package (N2/O2). Gas Witt gas mixer unit with hardware gas mixer for two gases, plus additional cutting gas connection. Pallet changer / automation Automatic heavy-duty pallet changer in longitudinal direction. LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB interface. RJ45 network interface. Central Link. Remote support. Installation Currently installed on a mezzanine. Mezzanine steel structure not included in the sale. Condition and availability Gbjdpozz Sd Uefx Acijt One owner from new, used in daily sheet metal subcontract production in Braintree, Essex. Under TRUMPF maintenance contract from new (two services per year) and still covered - full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available on request. Enquiries Full TRUMPF order confirmation, service history, hours report, cut samples and video of the machine running available on request.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 15,794 h, machine/vehicle number: A3231E0676, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser hours: 5,111 h, laser power: 12,000 W, laser wavelength: 1,030 nm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 16 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning speed: 280 m/min, workpiece weight (max.): 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2024) High-spec 2D fiber laser cutting machine, one owner from new, installed September 2024. 3000 x 1500 mm working area, Siemens Sinumerik 840D SL control. In daily production and under TRUMPF service contract from new. Key data Gbsdpfx Acszz Shyjijt Machine No.: A3231E0676 Year of manufacture: 09/2024 Laser source: TruDisk 12001 with smart beam control Laser power: 12,000 W Working area: 3000 x 1500 mm Max. sheet thickness (thick-sheet package fitted): mild steel 50 mm / stainless 50 mm / aluminium 40 mm / copper 16 mm / brass 12.7 mm Max. simultaneous speed: 280 m/min Machine weight (rating plate): 7,650 kg Supply: 400 V 3~ / 50 Hz, 74.0 kVA, 3 x 125 A Hours: 15,794 h operating / 5,111 h laser-on Gas mixing Onboard gas mixer fitted - hardware mixing system for two gases, with additional cutting gas connection and gas mix cutting data (N2/O2). No external mixer unit needed. Machine Box frame. Gantry drive with linear direct drives. Longitudinal conveyor belt. Transverse conveyor belt with tipping container (left). Process cooler for machine and laser (water/air). Work area illumination. Pilot laser. Spraying equipment. Automatic nozzle changer, cleaning and centring. Closed beam guidance via laser light cable (LLK). Machine status light. Integrated electrical cabinets. Transport and installation device supplied. Cutting unit Single cutting-head strategy. Protective glass with online condition checking. Dynamic Focus Control. Universal cutting unit with fully adaptive lens system. Control and software SINUMERIK control, 21.5" wide-screen multi-touch display. Integrated technology data. Production plan. Multi-sheet processing. Condition Guide. Cutting Guide. Quick post-production. Auto-shutdown. Programmable cutting gas / pressure selection. Microweld. Online Update Manager. Remote support interface. Functions and cutting packages AdjustLine, BrightLine fiber, ControlLine, DetectLine, Drop&Cut, FastLine, FlyLine, FocusLine, NitroLine, PierceLine, PlasmaLine, Smart nozzle automation, Smart Rerun. Integrated camera for process viewing. Fusion cut performance package, Highspeed cutting package, Highspeed Eco cutting package, cutting package for thick sheets, copper cutting package, brass cutting package. Pallet changer / automation Automatic pallet changer in longitudinal direction, max. workpiece weight 1,800 kg per pallet (2,200 kg across both). LiftMaster Compact interface prepared; loading automation not fitted. Safety and extraction CE marking, EC Machinery Directive. Light barriers. Enclosed protective housing with certified door viewing panels left and right. Electrical rolling roof. Multi-chamber compact dust extractor. Data transfer USB, RJ45 network interface, Central Link, remote support, TRUMPF monitoring software connection. Installation Installed on a mezzanine; steel structure not included. Condition and availability One owner from new, in daily subcontract production in Braintree, Essex. Under TRUMPF inclusive service contract from new - two services a year, parts included - and still covered. Full service history available. Can be viewed cutting under load on any working day by appointment; cut tests welcome. Offered ex works, decommissioned by TRUMPF-certified engineers and loaded onto your transport. Export packing available. Enquiries Order confirmation, service history, hours report, cut samples and video on request.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Godpfx Acezzkt Uoisbt Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: 600007090, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, working width: 3,100 mm, sheet thickness (max.): 13 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Number of rollers: 4 Number of driven rollers: 2 Diameter of upper roller: 280 mm Diameter of lower rollers: 280 mm Max. sheet thickness: 13 mm Max. pre-bending thickness: 10 mm Max. working width: 3,100 mm Bending speed: 5,000 mm/min Drive: Hydraulic Control: Conventional Power: 15 kW MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,810 x 1,980 x 1,540 mm Weight: 11,500 kg Transport packages: 2 Gbedpfxszxdk Is Aciet EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: HFE50-20LV010254, functionality: fully functional, pressing force: 50 t, stroke length: 350 mm, throat depth: 400 mm, working width: 2,090 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 8 Axis configuration: Y1 + Y2 + X1 + X2 + R1 + R2 + Z1 + Z2 Press force: 50 t Max. working width: 2,090 mm Frame distance: 1,665 mm Overhang: 400 mm Max. stroke: 350 mm Punch holder: Quick-change holder Tool holder type: European design MACHINE DETAILS Drive system: CNC Control system: Amada Operateur 2 CNC Power: 6 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,000 x 2,800 mm Weight: 5,500 kg Transport packages: 2 Gbedpozzbaljfx Aciot EQUIPMENT Tools Documentation CE marking

Condition: excellent (used), Year of construction: 2011, MODEL AMADA TOGU EU PRESCISION TOOL GRINDING MACHINE WHEEL CBN 150 MAX TOOL DIAMETER 160 MAX GRINDING DEPTH ,ONE CYCLE, 0.99 Gbsdpfx Acezx Sixsist SPINDLE MOTOR 1.5KW SPINDLE MOTOR SPEED 3000 RPM VERTICAL TRAVERSE 200 MACHINE WEIGT 470 KGS PWOER CONSUMPTION 4.8 KVA

Condition: used, Year of construction: 1999, total length: 3,750 mm, total width: 2,250 mm, total height: 1,950 mm, Colour: Cream Weight: 7.600 kg - Year: 1999 - Documentation available: No - CE marking present: Yes Gbsdpfszz Rb Sjx Aciot - CE certificate present: No - Serial number: 6081991152 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 22.0 - Max. sheet thickness [mm]: 10 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 13 - Backgauge type: Electric - Backgauge depth [mm]: 800 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Fixed table - Transport dimensions: 3750mm x 2250mm x 1950mm (l x w x h) - Transport weight [kg]: 7600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2002, machine/vehicle number: 54, functionality: fully functional, pressing force: 60 t, table width: 1,100 mm, table length: 3,000 mm, The machine is in like-new condition! Submitting a bid obligates you to pick up the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, and Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. TECHNICAL DETAILS Gbjdpfx Aezzny Sjcijt Punching force: 60 t Table size: 1,100 × 3,000 mm EQUIPMENT Setup operation Automatic operation Continuous operation Wiring diagrams Operating manual

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Gedjzzlc Rjpfx Aciobt Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: excellent (used), Year of construction: 2014, operating hours: 443 h, Model Amada HFE MK2 80 x 2500 , 4 axis Hydraulic Downstroking Press Brake VERY LOW HOURS 443 Year 2014 Tonnage 80 tonnes Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Godpozmtqaofx Acisbt Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: used, Year of construction: 2019, total length: 3,750 mm, total width: 1,900 mm, total height: 2,900 mm, Colour: Cream Weight: 12.620 kg Price: On request - Details: Gbedpfxezzb I Ae Acist - └ Description: Machine errors. Cannot reference axes. Needs repair. - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 73431915241 - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 22.0 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2500 - Max. stroke [mm]: 265 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard, Angle measuring system - Transport dimensions: 3750mm x 1900mm x 2900mm (l x w x h) - Transport weight [kg]: 12620kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1997, total length: 4,200 mm, total width: 2,200 mm, total height: 2,000 mm, Colour: Cream Weight: 13.500 kg Cutting bench, cutting shear, Guillotine shear Type: Hydraulic Type: Conventional Manufacturer: Safan Type: HVR 430-6 Year: 1997 Max. working width: 4300mm Max. sheet thickness: 6mm Electric backgauge 1000mm Gbodpfezlytljx Aciet + stacking-station Motor-power: 15kW Machine-dimensions: 5200x2200x2000mm Machine-weight: 13500kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4300 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Options: Digital readout - Transport dimensions: 4200mm x 2200mm x 2000mm (l x w x h) - Transport weight [kg]: 13500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg Godpfxezr Inws Acijbt - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, total length: 3,550 mm, total width: 1,800 mm, total height: 2,800 mm, Colour: Grey Weight: 10.000 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 11520 - Drive system: CNC - Control system brand: Baykal - Control system type: EC4-CNC - Power [kW]: 11.0 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 150 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Max. stroke [mm]: 260 - Crowning system: CNC-controlled - Punch holder: Quick-release Godpfxozrxfts Acijbt - Tool holder type: European-style - Transport dimensions: 3550mm x 1800mm x 2800mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, Excellent opportunity to acquire a well-maintained Bystronic BySprint Fiber 4020, equipped with a 6 kW fiber laser source and ByTrans Extended automatic loading and unloading system. Machine Highlights - Year of manufacture: 2017 - Laser power: 6 kW Fiber - Cutting hours: Approx. 2,539 hours - Working area: 4,000 x 2,000 mm - Automatic loading/unloading: ByTrans Extended - Control system: ByVision with 22" touchscreen - Dual shuttle table system for maximum productivity Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Year of manufacture: 2017 * Laser power: 6 kW Fiber * Cutting hours: Approx. 2,539 hours * Working area: 4,000 x 2,000 mm * Automatic loading/unloading: ByTrans Extended Gbodpfx Acszw Nfnoiet * Control system: ByVision with 22" touchscreen

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Used 3-meter CNC plate shear from ERMAK Godpfx Aszzpfcscisbt Type: CNC HVR 3106 Cybelec DNC 60 control system Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Electric cutting clearance adjustment Year of manufacture: 2012

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 12.873, throat depth: 300 mm, punching force: 100 t, overall weight: 2,250 kg, cutting width (max.): 600 mm, TECHNICAL DETAILS Punching force: 100 t Stroke: 300 mm Punching speed: 28 strokes/min Shearing width: 250 mm Max. sheet thickness: 16 mm Round material cutting capacity: 50 mm Cutting width: 600 mm Max. sheet thickness: 20 mm MACHINE DETAILS Gbsdpfjzxdquex Aciet Control: Conventional Drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,250 x 2,100 mm Weight: 2,250 kg Shipping packages: 1 unit

Condition: excellent (used), Year of construction: 2012, Used 3-meter CNC press brake from Ermaksan Type: Powerbend Pro 30120 Capacity: 3100 x 120 tons Year of manufacture: 2012 Cybelec DNC 660 CNC control (2D graphic) Y1, Y2, X, and R axes CNC controlled CNC crowning Euro-style tool clamping Gsdpfx Aszzpc Ijciebt 1 set of tools for 1 to 6 mm