Very well maintained & little used bending machine.
- Asymmetrical 3-roller system with swing-out top roller and eccentric lock.
- Right and left hand operation
- Lower roll adjustment with setting lever and eccentric
Roll length 1.050 mm
Sheet thickness (St 37) max. 2.0 mm
Roll diameter 75 mm
Minimum bending Ø 115 mm
Dimensions (L x D x H) 1,930 x 700 x 1,160 mm
Weight 350 kg
Bvqy3eiomc
sheet width 1550 mm
plate thickness 2,0 mm
roll length 1550 mm
roll diam. toproll 90,0 mm
engine output manuell kW
weight 560 kg
range L-W-H 2580 x 700 x 1250 mm
Bn0zhthndh
Furnishing:
- manual asymmetrical 3-roll round bending machine with hand drive
- manual folding warehouse
- manual delivery d. rear roller
- Profile grooves: 4/6/9 mm
sheet width 2000 mm
plate thickness 13 mm
pre-bending 7
Bjq8wbpux3
upper roll diameter 250 mm
diameter of lower rolls 250 mm
total power requirement kW
weight of the machine ca. 9 t
dimensions of the machine ca. 7,5 m
sheet width 1010 mm
plate thickness 1 mm
pre-bending ja
diameter of upper rolls 50 mm
diameter of lower rolls 55 mm
weight of the machine ca. 155 kg
dimensions of the machine ca. 1,6 x 0,4 x 0,4 m
Condition: very good
Manual bending machine with asymmetric roller arrangement, swing-out
Top roller, conical bending by tilting the back roller and
Longitudinal grooves. The sheet thickness refers to a strength of the
Buxbbs8pxy
Sheets of 380 N / mm².
Machine dealer with own stock of 2500 m².
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet bending machine, three-roll round bending machine
-Three-roller round bending machine: manual, heavy cast construction with stable base
-Sheet width: max. 1010 mm
-Roller diameter: 2 x 45 mm/1 x 50 mm
-Dimensions: 1580/520/H1110 mm
-Weight: 150 kg
O9smd
Krups A1,5
Bifiszozeu
weight of the machine ca. 300 kg
usable length: 1.020 mm
Roll diameter: 55 mm
Dimensions L x W x H: 1.570 x 470 x 1.040 mm
Suszq8
Weight of machine approx.: 200 kg
sheet width 1050 mm
Ok9lb
plate thickness 1,50 mm
roll length 1050 mm
roll diam. toproll 68,0 mm
engine output manuell kW
weight 280 kg
range L-W-H 1930 x 700 x 1160 mm
OFFER 21212
Manual 3-roll plate bending machine with asymmetric roll arrangement FASTI, 102-10-1,0, 21212
Technical data:
- Working width 1020 mm
- material thickness max 1,00 mm
- roller diameter 55 mm
- top roller crowned, can be swung out to the front
- Rear shaft with handwheel inclined adjustable for conical rounding
- Lower roller adjustment with setting lever and eccentric
Wc7uc90b
- Front shaft parallel
- space requirement approx. W 1250 x H 950 x D 750 mm
- Weight approx. 160 kg
sheet width 610 mm
Blopzdjq9c
plate thickness 1,0 mm
distance between columns 620 mm
diameter of upper rolls 38 mm
total power requirement Handbetrieben
weight of the machine ca. 40 Kg
dimensions of the machine ca. 950 x 270 x 360 mm
Sheet bending machine with:
- Capacity 1050 x 2 mm
- High strength wrought iron rollers with SAE 1050 certificate.
- Footswitch
- conical bending
- Swiveling top roller
- Safety device emergency leash
- Documentation
- 400 volts
- CE certificate
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-Max. Sheet width: 1520 mm
-Max. Sheet thickness: 2.5 mm
Qkvza3k8n
-Roller diameter below: 88 mm
-Upper roller diameter: 88 mm
weight of the machine ca. 1,8 t
Be7yiesx8j
for the production of ventilation pipes
sheet width: 1080 mm
plate thickness: 1,25 mm
pre-bending:
distance between columns: 1200 mm
roll dia. top roll: Ø 63 mm
roll dia. bottom roll: Ø 63 mm
weight of the machine ca.: auf Anfrage t
Fb7ssa9
dimensions LxWxH: 1,9 x 0,6 x 0,9 m
further details:
- upper roll can be swing out
- operation via hand wheel
sheet width 1270 mm
plate thickness 2,5 mm
roll length 1270 mm
roll diam. toproll 86,0 mm
engine output manuell kW
weight 425 kg
Cvcio2g8
range L-W-H 2200 x 800 x 1300 mm
bending length: 1050sheet thickness: 1upper roll diameter: 56
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
Bdf7wk8y2t
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
- D...
Bending capacity 0.8 mm
Prebending mm
Delivery promptly, subject to prior sale
Special price € 230,-(instead of € 285,-)
Bending capacity: 0.8 mm
Bending length: 305 mm
Upper roller diameter: 25 mm
Ntwfn
Weight: 14 kg
parallel asymmetric. Roller arrangement - with VorbiegungDrahteinlegerille in lower roller and HinterwalzeZustellung of lower roll and page roll by hand wheels left and rechtsmit Rädervorgelegemit base
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-Spare part top roller
-Drawing with the pictures
-Max. Sheet width: 2060 mm
Zaxdot3i3
-Max. Sheet thickness: mm
-Roller diameter: 141 mm
-Bearing diameter: 75 mm
-Transport dimensions: 2690/141/H141 mm
-Weight: 290 kg
3-roll round bending machine, working length 1000 mm
Buolg8zvtq
Product information "section and pipe bending machine from Sahinler"
RCPK35F
section and pipe bending machine
Shafts Ø 50 mm
Bottom rollers Ø 155 mm
Top roller Ø 155 mm
Working speed. 4.5 m / min
Motor power 400V, 1.5 kW
Weight 350 kg
Capacity in the angles: 50 x 50 x 6 mm
Capacity in the T: 60 x 7 mm
Capacity in the U: UPN 80 mm
Dxuegu
Capacity in the square: 35 mm
sheet width 1270 mm
plate thickness 1,50 mm
roll length 1270 mm
roll diam. toproll 75,0 mm
engine output manuell kW
weight 330 kg
C2v3qghe
range L-W-H 2150 x 700 x 1160 mm
sheet length: 1050sheet thickness: 1,0weight approx.: 0,185messurements (LxWxH): 1,4x0,7x1,12
Ju8bom
Bending performance 3 mm
Prebending 2 mm
Delivery time approx. 6-8 weeks of order placement
Bending capacity: 3 mm
Hmow7fz
Prebending: 2 mm
Bending length: 1,050 mm
Roll diameter: 90 mm
Length: 2,080 mm
Width: 700 mm
Height: 1250 mm
Weight: 410 kg
asymmetrical roller arrangement 2 rollers by means of hand crank rear roller delivery driven with hand wheel swivel top roller conical roller device sub and rear roller with Drahteinlegerillen operating instructions in German EXTRA: hardened rolls EURO...
Angle Bar Bender manual
Model 100 E
German quality
Capacity cold (St 37):
steel up to 100x6 mm
solid round 18 mm
with length stop
with 2 Radius-toolings
weight around 27 kg
Bh82qt3syr
gebr. 3-roller manual round bending machine
make FASTI
model 102 - 10 -1,5
Machine no.: 00102014
useful length 1020 mm
sheet thickness 1,5 mm
roller Ø 65 mm
outer dimensions:
Length 1500 mm
width 600 mm
height 1000 mm
O8c9h
Weight approx. 190 kg
Asymmetrical roller arrangement
Top roller with folding groove
bottom roller with eccentric infeed
conical rounding by inclination of the rear roller
Three roll bending machine
Bending capacity 2 mm
Jvrzpm
Roller diameter 100 mm
Roll length 2000 mm
Manual drive
Hinged bearing mechanical
sheet width 1020 mm
plate thickness 1,5 mm
roll diam. toproll 55 mm
engine output manuell kW
weight ca. 100 kg
range L-W-H 1200 x 500 x 1100 mm
Furnishing:
Uz8jfx9r
- manual bending machine
- with asymmetrical roller arrangement
- manual adjustment of the lower roller
- manual adjustment of the rear roller
- hand crank
- Swiveling top roller, with folding bearing
bending length: 1050sheet thickness: 1.8upper roll diameter: 70
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
- Digital re...
Bending capacity 1.2 mmBending mmDelivery time approx. 2 months from orderBending capacity: 2 mmBending length: 1,270 mmOver roll diameter: 68 mmMotor: 1.5 kWLength: 1,610 mmWidth: 700 mmHeight: 1.160 mmWeight: 385 kgmwith underframe asymmetrical roll arrangement with pre-bending wire groove in bottom roll and rear roll infeed of bottom roll by central lever with wheel transmission Operating instructions in GERMAN or ENGLISH option: hardened rolls € 480,--(symbol photo shows mod. R 1050 x 56)
Wl...
4 Roll bending machine, max. 1.75 mm sheet thickness, length 1520 mm.
The bending machine is currently still in operation and fully functional.
Due to reasons of age the company will be closed down. All sheet metal working machines are for sale and can be inspected.
F82pubppk
There is a good loading possibility.
5
The small three-roller round bending machine HW01-2,5x300 for in the workbench vice, is ideal for every craftsman, do-it-yourselfer or other company suitable
Data
Ccxfkef3
-bending length 300 mm
-steel sheet 1,0 mm
-aluminium sheet 1,5 mm
-narrow steel sheets up to 2,0 mm possible
-weight approx. 10 kg
-wire or round steel 1-5 mm bending
-external dimensions: WxDxH (mm) 510x110x200
OSTAS PLATE ROLLER
TYPE SMK 1070 x 96
- Capacity 1070 x 3 mm
- Conical roller
Bsqupkba
- Swivelling top roller
- Documentations
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
working width: 1050 mm
metal sheet thickness: 1,5 mm
Njw93ychg
upper roller-Ø: 70 mm
below roller-Ø: 70 mm
weight: 320 kg
space needed: 700 x 1300 x 1100 mm
bending length: 1250sheet thickness: 3upper roll diameter: 90
Technical specifications:
Bdf7ndkkou
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
- D...
Bending capacity 1 mm
Bending mm
Delivery time prompt, subject to prior sale
Bending capacity: 1 mm
Bending length: 1,050 mm
top roller diameter: 56 mm
Ysc7zo
Length: 1.400 mm
width: 700 mm
Height: 1.120 mm
Weight: 185 kg
with underframe asymmetrical roller arrangement with pre-bending wire insertion groove in the lower roller and rear roller Infeed of the lower roller by central lever with gear transmission Operating instructions in GERMAN and ENGLISHEXTRA: hardened rollers EURO 390,--
Manual three roll round bending machine make FASTI type 103-20-1.5
Machine # 9113030 Year of construction 1991
Technical data:
working length 2040 mm
max. sheet thickness 1,5 mm
roll diameter 100 mm
weight approx. 740 kg
outer dimensions approx. 2500 x 980 x 1400 mm
with
- swing-out upper roll
Nmrft
- lower and rear roller adjustment with hand wheel
little used, in very good condition
Bending length: 1500 mm
B7hlxgeo
bending capacity: 2 mm steel
roll diameter: 80 mm
manual operation
SAY-MAK PLATE ROLLER
TYPE SR 1050 x 75
- Capacity 1050 x 2 mm
Brnxh00qus
- Conical rollers
- Swivelling top roller
- Technical information
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
working width: 1030 mm
metal sheet thickness: 1 mm
upper roller-Ø: 60 mm
below roller-Ø: 60 mm
weight: 170 kg
space needed: 560 x 1570 x 1080 mm
Zxy8p9m
bending length: 1050sheet thickness: 3.3upper roll diameter: 90
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
Bdf7nwmvww
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
-...
Bending capacity 2 mm
Bending mm
Delivery time prompt, subject to prior sale
bending capacity: 2 mm
bending length: 1.050 mm
upper roll diameter: 75 mm
length: 1.930 mm
width: 700 mm
Height: 1.160 mm
Cqryzcjzs
weight: 300 kg
with underframe asymmetric roller arrangement with pre-bending wire groove in lower roller and rear roller Feed of lower roller by central lever with gear transmission Operating instructions in GERMAN and ENGLISHEXTRA: hardened rollers EURO 440,--(symbol photo shows mod. R 1...
Round bending machine
Manufacturer: Stockert
Kxqxmjuv
Type: RM 70
Y.O.C: 1994
Power: 2030 mm x 0,8
Prior sales and technical mistakes reserved
Terms of delivery: ex-work
Terms of Warranty: None at used machines
Sheet thickness up to 1.5mm
Sheet width max 600mm
Bd9bqeixux
No of rollers 4
Diameter of rollers 50mm
MARCELS MASCHINEN CH
SAY-MAK PLATE ROLLER
TYPE SR 1550 x 75
- Capacity 1550 x 1,2 mm
- Conical rolling
- Technical information
CALL FOR MORE INFO
DUTCHMACH
D8rfqhkmy
Metalworking machines
ENSCHEDE
working width: 1030 mm
metal sheet thickness: 1 mm
upper roller-Ø: 60 mm
below roller-Ø: 60 mm
weight: 170 kg
space needed: 560 x 1570 x 1080 mm
Iw8bipcy0
bending length: 2050sheet thickness: 1.8upper roll diameter: 95
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
Cqkir98q
- In acccordance with CE norms.
Options:
- Back roll with motor
- D...
Technical data:
-Bending by hand crank
Ba8vujiri9
-Bending performance square steel ST 37 up to 22 mm
-Bending length betw. the rotating units adjustable up to 1350 mm
-Space requirement approx. B 1750 x H 1100 X 500 mm
-Weight approx. 200 kg
Sie bekommen eine Rechnung in Papierform. Differenzbesteuert nach § 25a UStG. Daher kein Ausweis der Mehrwertsteuer auf der Rechnung.
Vtxf2i
Sheet thickness up to 1.25mm
Sheet width max 1020mm
No of rollers 3
Diameter of rollers 56mm
M2njpryp
MARCELS MASCHINEN CH
OSTAS PLATE ROLLER
TYPE S 1050 x 46
- Capacity 1050 x 0,8 mm
- Conical rolling
- Technical information
CALL FOR MORE INFO
DUTCHMACH
D8ssgxwjo
Metalworking machines
ENSCHEDE
working width: 1020 mm
metal sheet thickness: 1 mm
32qxc3xgp
upper roller-Ø: 55 mm
below roller-Ø: 55 mm
space needed: 1370 x 570 x 1100 mm
Used Round rolling machines manual
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: The World's 10 biggest excavators
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 220,000 inquiries per month
Photo gallery: the 10 strongest forklift trucks in the world
