Used Roll benders (motor-driven) for 3 - 6mm sheet thickness for sale (156)

Condition: new, sheet thickness steel (max.): 3 mm, roller diameter: 95 mm, bending length: 1,070 mm, - Capacity 1070 x 3 mm - Conical rollers - Pivoting top roller - Foot pedal control Bweb Hmswhgm Tsh Nbjl - Brake motor - Emergency stop - Documentation - 400V

Condition: good (used), Three-roller round bending machine, three-roller sheet metal bending machine, bending machine, sheet metal rolling machine, 3-roller round bending machine, profile bending machine, three-roller sheet metal rolling machine, motorized round bending machine Bwob Hmhjwcrk He Nbjl -Roll bending machine: hand-operated 3-roll roll bending machine -Max. sheet width: 1270 mm -Max. sheet thickness: 2.5 mm -Roller diameter: 90 mm -Dimensions: 1960/610/H1050 mm -Weight: 524 kg

Condition: new, Sheet width 1250 mm sheet thickness 5,5 mm bending 5,0 mm roll length 1280 mm smallest diameter 210 mm roll diameter - top 140 mm weight 1365 kg dimension L-W-H 2.020 x 900 x 1.200 mm Standard equipment: - Central rolls driven by electric motor, rotary reduction gear and gear drive - Top roller can be swung out to the side - Main motor with braking device - Conical bending device Bwjbjhcw Rxe Hmh Nbsl - Mobile control panel and foot pedal - CE mark/declaration of conformity Special equipment: - motorized rear roller adjustment - digital display for rear roller - induction hardened rollers

Condition: excellent (used), Model: MSMS Capacity: 1550 x 6mm Max Thickness Of Sheet: 6mm Max Width: 1550mm Bwob Hmsv A T A Ssh Nbel Top Roll Dia: 160mm Bottom Roll Dia: 160mm With Angle Roll Facility Dimensions: 3000 x 1000 x 1300mm High Weight: 2500 KGS

Condition: good (used), Hydraulic round bending machine - Bending capacity: 5.5 mm Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be contacted at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Bwob Hmevg E Insh Nbol Shipping with forwarding agent.

Condition: used, Year of construction: 1999, sheet width 1550 mm plate thickness 4.5 mm pre-bending 4.0 mm roll length 1550 mm min. dia. 190 mm bending speed ca. 5.3 m/min roll diameter 130 mm engine output 2.2 kW weight 1360 kg range L-W-H 2500 x 950 x 1110 mm Features: - Robust electromechanical roll bending machine - 2x central rollers driven by electric motor (top & bottom roller) Bwjb Hmhsv Uq Ivo Nbsl - Top roller manually adjustable, with safety bearing - Bottom roller manually adjustable via handwheel - Side roller manually adjustable via handwheel * Including analog position indicator - Asymmetrical roller arrangement - 1x freely movable foot control

Condition: new, - Capacity 700 x 4 mm Bwob Hmsh Raytjh Nbjl - Conical rollers - Removable top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: used, 3-Roll Roll Bending Machine Sheet length: 1250 mm Sheet thickness: approx. 6 mm Top roll diameter: 170 mm Bobewbvl Eo Hmh Nbewl Bottom roll diameter: 140 mm Roll speed: 6.5 rpm Rolling speed: approx. 2.8 meters min. Roll drive motor power: 3 kW Top roll adjustment motor power: 0.75 kW Power supply: 380 volts, 50 Hz. - 2 bottom rolls driven - Symmetrical roll arrangement - Motorized top roll adjustment - Forward and reverse rotation via electric foot switch - Swing-out folding bearing and spindle support to relieve the load on the top roll - Housing bearing of the rear roll broken, poorly repaired (see pictures) Space requirement: L x W x H: 2700 x 1100 x 1400 mm Weight: 1.8 tons.

Condition: new, sheet width 700 mm plate thickness 4,0 mm distance between columns 720 mm diameter of upper rolls 95 mm total power requirement 1,1 KW Bwob Hmhjwfyqyo Nbol weight of the machine ca. 0,37 t dimensions of the machine ca. 0,95 x 0,76 x 1,25 mm

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm upper roll diameter 110 mm diameter of lower rolls 110 mm Bsbjvx Uvxj Hmh Nbowl bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: new, KRM is a series of heavier medium capacity round bending machines for workpieces up to 2000 mm (78.74 in.) in length. The machines have a solid, closed machine frame and you can adjust the rear roller manually by hand or optionally with a motor. With special features such as conical bending and pre-bending, the models in this series are suitable for a wide range of applications in individual production. Bwob Hmh Nou Hf Rgebel

Condition: used, sheet width 1020 mm plate thickness 3.3 mm Sheet thickness / Pre-Bending 3.0 mm roll length 1040 mm speed ca. 4.0 m/min roll diam. toproll 110 mm roll diam. bottom roll 110 mm Bjb Hjv T Npismh Nbowl Roller diameter / side roller 110 mm Adjustment range of the side roller ca. 85.0 mm work height max. ca. 835 mm total power requirement 2.0 kW weight 525 kg range L-W-H 1925 x 985 x 1450 mm from a maintenance workshop Equipment: - Robust electric-driven roll bending machine for single and series production - Manually adjustable side roller (2 hand cranks) - Manually adjustable lower roller (eccentric hand lever) - Asymmetrical roller arrangement - Manually swiveling upper roller - Rollers with profile inlets - Safety enclosures

Condition: new, Year of construction: 2022, - Capacity 1070 x 3 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Tapered rollers - Brake motor - Foot switch - Emergency stop - Documentation - 400V Beb Hmh Nogg Rbpsbswl

Condition: new, sheet thickness: 3bending length: 1250upper roll diameter: 90sheet length: 1250 Technical specifications: Bwjb Hmh Njd Ab Tzobel - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Working Length: 1250 mm Maximum Thickness:Pre-bending: 2.5 mm Bending: 3.0 mm Yield Point: 240 N/mm² Number of Rolls: 3 Top Roll Diameter: 90 mm Minimum Bending Diameter: 130 mm Motor Power: 1.1 kW Machine Length: 1950 mm Height: 1130 mm Width: 900 mm Weight: 500 kg Options: - Back roll with motor EURO 825,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Body cover EURO 314,-- - Hardened rolls EURO 550,-- We have many references!

Year of construction: 2024, Condition: new, MRB-S Series Technical data (see pictures) Standard equipment CE Conical bend Motorized back roller Additional control panel for upper and lower rollers which are operated with landing gear. SAE 1050 steel rollers Induction hardened rollers, Relaxed steel construction, at 2.5 and 3m Bobjfin E Do Hmh Nbjwl Machine supports, brake system for precise bends, Digital display. Motorized back roller with puller Optional equipment Motorised under-roller mounting, ground rollers Extended rolls for profile bends, Special rollers for profile bending, Special packaging for international deliveries. MRB series: Technical data (see pictures) Standard equipment CE standard Digital display Conical bend Motorized back roller with tightening Additional control panel for upper and lower rollers, which are operated with landing gear. operated by landing gear. SAE 1050 steel rollers, Induction hardened rollers, Relaxed steel construction, Braking system for precise bends. Optional equipment Motorized bottom roller with suit, stone rollers Extended rolls for profile bends, special rollers for profile bending, Special packaging for international Programmes Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk

Condition: new, KRM is a series of heavier medium capacity round bending machines for workpieces up to 2000 mm (78.74 in.) in length. The machines have a solid, closed machine frame and you can adjust the rear roller manually by hand or optionally with a motor. With special features such as conical bending and pre-bending, the models in this series are suitable for a wide range of applications in individual production. Bwsb Hmh Nou E S Enebol

Condition: new, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for the movement of the rear roller - Digital display for bottom roller movement (material clamping) - Hardened rollers - Conical roller Bsb Hmh Njgg Nv Isbjwl - Brake motor - Emergency stop - Documentation - 400V

Year of construction: 2024, Condition: new, Bending capacity: 6 mm Bending: 5 mm Bwjbsftdh Is Hmh Nbsl Bending capacity: 6 mm Bending: 5 mm Bending length: 2,030 mm roller diameter: 170 mm Engine power: 4 kW Length: 3.600 mm Width: 1,020 mm Height: 1.120 mm Weight: 2.400 kg The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: as good as new (ex-display), KRM is a series of heavy-duty, medium-capacity round bending machines for workpieces with a length of 1000 mm. The machine has a solid, closed machine frame. The rear roller is motorised. With special attributes such as cone bending and bevelling, this model is suitable for a wide range of applications in one-off production Bwjb Hmoq I Nd Djh Nbel

Condition: new, sheet thickness steel (max.): 35 mm, roller diameter: 90 mm, bending length: 700 mm, - Capacity 700 x 3.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical roller Bjb Hmor Ign Reh Nbjwl - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Year of construction: 2024, Condition: as good as new (ex-display), Hydraulic bending machine with variable axes HRB 3V by Durma Technical data: Bending size: 3100 mm Bending capacity Ødx1, 5:51 mm Bending capacity Ødx5: 60 mm On bending performance Ødx1, 5:39 mm Performance of the bending Ødx5: 35 mm Upper roller: 520 mm Bottom roll: Secondary roller: 470 mm Maximum roll width: length: 6600 mm Width: 2250 mm Height: 2670 mm Working height: 1920 mm Weight: 40500 kg Motor power: 45 kW + 18.5 Min. additional upper roller diameters: Oil tank capacity: 1000 litres Bob Hmod E Ib Ijh Nbswl More machines are demonstration ready for us in Staufenberg. Upon request we send more information.

Condition: new, The models in our KRM ST series take on bending work on workpieces up to 3000 mm (118 in.) in length. The heavy, medium-capacity round bending machines have a solid, closed machine frame and a motor-driven rear roller. Conical bending and pre-bending are among the features that allow you a wide range of applications for individual production in metalworking, steel and metal construction. Bob Hmhoqagtij Nbowl

Condition: new, roller diameter: 140 mm, – Capacity 1270 x 4.5 m – Electrically adjustable rear roller – Digital display for rear roller movement – Hardened rollers – Conical rollers – Pivoting top roller Bweb Hswbug Uemh Nbsl – Brake motor – Emergency stop – Documentation – 400 V

Condition: new, The models in our KRM ST series take on bending work on workpieces up to 3000 mm (118 in.) in length. The heavy, medium-capacity round bending machines have a solid, closed machine frame and a motor-driven rear roller. Conical bending and pre-bending are among the features that allow you a wide range of applications for individual production in metalworking, steel and metal construction. Bwob Hjihvtgemh Nbjl

Condition: new, – Capacity 1550 x 4.5 mm – Electrically adjustable rear roller – Digital display for rear roller movement Bsb Hev Sp D Romh Nbewl – Hardened rollers – Tapered rollers – Foldable top roller – Brake motor – Emergency stop – Documentation – 400V