Used roller levellers for sale (53)

Condition: ready for operation (used), empty load weight: 9,700 kg, Ungerer RM 1550 x 5 mm Max sheetwide: 1550 mm Max sheetthickness: 0,7 > 5 mm Nodpjymg Rzofx Adbjwc Max speed: 16 m/min Number of flattingcoils: 9+8 rolls (dia 55 mm) Power: 28 HP

Condition: ready for operation (used), (Merk is oorspronkelijk Georg Fischer, overgenomen door Hämmerle AG) Compacte machine van Zwitserse makelij die gebruikmaakt van een automatisch nivelleringsdruksysteem om onderdelen recht te zetten en spanningsvrij te maken. Toepassingen: fijngestanste onderdelen - koppelingsplaten - remschijven - zaagbladen - vliegtuigonderdelen - laser- en plasmagesneden onderdelen - vlakmaken van onderdelen vooraf aan robotlassen/-slijpen. Nwedjv Rwcrspfx Adbsc - voorkomen doorbuiging met 19 teruglopende rollen - 11 tegenrollen in onderste positie - 10 tegenrollen in overwegend positie - boven- en onderrollen zijn voorzien van hydraulische motoraandrijvingen - overbelastingsventielen voorkomen schade aan de machinedeur, overbelasting of verkeerde instelling - snelle insteltijd, vereist invoer van 3 parameters (ingangsspleet - uitgangsspleet - invoersnelheid) - snelheid van de machine: 2-20 m/min maximale breedte: 750 mm maximale dikte: 12 mm min. onderdeellengte: 100 mm vermogen: 31kW totaalgewicht: 10 ton

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm Nsdpfx Ajin Rn Ajdbowc -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Nwedoym Nb Nspfx Adboc Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: used, Year of construction: 1987, material width 120 mm material thickness 0,2 - 4,0 mm no. of straightening rolls 19 straightening roll diameter 24 mm material cross-cut 2 - 120 mm² 40 mm bending speed 5 - 25 m/min power requirement 2,5 kW weight 0,85 t dimensions (WxDxH) 1,2 x 1,7 x 1,6 SPECIAL DEAL as is where is, in need of overhaul WITHOUT putting into operation / WITHOUT additional work free loaded to truck Njdpfxeynmpae Adbswc

Condition: used, Year of construction: 1970, material width 200 mm Nedpfsvzxm Hsx Adbowc material thickness 0,5 - 3,0 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm power requirement 3,1 kW weight 1,1 t dimensions (WxDxH) 1,5 x 1,2 x 1,9 m SPECIAL DEAL as is where is, WITHOUT electrical cabinet WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 2007, material width 800 mm material thickness 3 - 14 mm no. of straightening rolls 9 straightening roll diameter 23 mm number of draw-in rolls 2 Nwsdpfx Asylzw Tsdboc speed 23 m/min power capacity 2,2 kW weight 2,7 t dimensions (WxDxH) 3,6 x 1,2 x 2,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1982, material width 250 mm material thickness 0,4 - 5,0 mm no. of straightening rolls 9 straightening roll diameter 60 mm speed 3 - 15 m/min material thickness at 250 mm material width 3,5 mm material thickness at 100 mm material width 5,0 mm Nwodpfxjvuk Nys Adbjc power requirement 1,8 kW weight 0,9 t dimensions (LxWxH) 1,45 x 1,4 x 1,55 m with infinitely variable drive, centralized adjustment of the straightening rolls, indication via dial gauges, support of the levelling rolls, coil loop control via proximity switch material thickness 3,5 mm at material width 250 mm material thickness 5,0 mm at material width 100 mm

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,25 - 3,0 mm no. of straightening rolls 11 straightening roll diameter 30 mm speed 6 - 60 m/min power requirement 15,0 kW Nwsdpfxjylcmpo Adboc weight 1,1 t dimensions (WxDxH) 1,1 x 1,7 x 1,5 m SPECIAL DEAL as is where is, as spare part dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min Nwodpfx Ajvuk Sbedbjc power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1990, material width 150 mm material thickness 0,5 - 5,0 mm no. of straightening rolls 7 straightening roll diameter 45 mm number of draw-in rolls 2 inlet roll diameter 72 mm material thickness / at material width 3,0 / 150 mm material thickness / at material width 4,0 / 120 mm material thickness / at material width 5,0 / 80 mm Nwsdpfovuk N Hox Adboc power requirement 3,0 kW weight of the machine 0,7 t dimensions (WxDxH) 1,3 x 1,1 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: not inspected (used), Year of construction: 1994, functionality: unexamined, machine/vehicle number: 86636, overall weight: 10,000 kg, pressing force: 25 t, installation height: 600 mm, stroke length: 200 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 08/04/2026 and 16/04/2026! TECHNICAL DETAILS Pressing force: 250 kN Ram stroke: 200 mm Installation height: 600 mm Nwjdsylaa Hspfx Adboc MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 43 A Dimensions and weight: Dimensions (L x W x H): 5,000 x 4,000 x 3,500 mm Weight: 10,000 kg Note: The machine can be transported on a standard truck.

Condition: excellent (used), number of straightening rollers: 19, roller diameter: 30 mm, Straightening machine GF Georg Fischer - TRM 30/75 MACH-ID 9350 Nwodpfeycu Rzjx Adbec Make: GF Georg Fischer Type: TRM 30/75 Rolling width: 750mm Top Roll Ø: 30mm Bottom Roll Ø: 30mm Number of rolls:19 Rolling speed: 0-5 Length: 3800mm Width: 2300mm Height: 2409mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, MOrgan Rushworth 1250 3/3.24NF PBR 1250 Nedpfx Adjx Rkyiebswc

Condition: used, Year of construction: 1966, 5 weight 5 t Nsdpfxsx U A Nkj Adbjwc .

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Nwedpfxjvgbgae Adbjc Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Njdpeu Ic Avofx Adbjwc Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: ready for operation (used), Year of construction: 1998, Pressing force: 5000kN, max. operating pressure: 500bar, portal clearance: 2600mm, opening height: 470mm, max. straightening ram stroke: 500mm, min. edge distance: 375mm, rapid traverse: 450mm/min, straightening speed: 45mm/min, return speed: 1100mm/min, feed rate: 12m/min, max. feed force: 5000kN, table height: 1000mm. Machine dimensions X/Y/Z: approx. 4600mm/3250mm/3250mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Nodpfxoxlit Is Adbswc

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Nodpev Tpv Nofx Adbjwc Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor.

Condition: new, Year of construction: 2025, material width 100 mm material thickness 15 mm no. of straightening rolls 9 straightening feed 7 m/min total power requirement 0,75 kW weight of the machine ca. 380 kg dimensions of the machine ca. 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers Nwodpsurni Usfx Adbjc - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: A-08/420, Feeding and Straightening Machine Manufacturer: DREHER Model: 1676 Year of manufacture: 1990 Nwsdpfxeyfv A De Adbjc Strip width: 500 mm Material thickness: 0.8 - 5 mm Straightening roll diameter: 80 mm Number of straightening rolls: 7 Feeding roll diameter: 80 mm 2 exit rolls diameter: 80 mm Adjustable entry height Passage: 505 mm Oiling unit Roller basket Strip guide: 505 mm

Condition: excellent (used), functionality: fully functional, leveller UNGERER Typ 2200/2,5/17 with the dimensions: 2100 x 2,50 mm, 17 rolls, diam. of the rolls 55 mm - Drive power - main drive 30 kW - Height adjustment, electric motor - Tilting device, electric motor Nwodpjygr Ifsfx Adbec - Crowning (lower support adjustment, mechanical/manual) and individually adjustable - Central grease lubrication of the straightening roller bearing strips - Oil circulation lubrication of gearbox and drive shafts - Control cabinet - 9 upper supports with support rollers - 9 lower supports with support rollers - Reversible - Straightening machine has a 200 mm bar - Steel frame available at extra cost - Roller spacing, vertical 35 mm - Control unit missing - Straightening machine is provisionally connected - Box with complete set of spare rollers, straightening roller diameter 54.7 mm

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm Nwjdpevuum Nsfx Adbec number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 2001, material width 400 mm material thickness 0,7 - 4,2 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of draw-in rolls 2 + 2 diameter of draw-in rolls 80 mm speed 18 m/min power capacity 2,5 kW Nsdpfx Adevzxqfjbjwc weight 0,8 t Dimensions (WxDxH) 1,0 x 1,3 x 1,5 m with motor driven, with coil loop control via contact plate, roll adjustment separately manual

Condition: used, material width 250 mm material thickness 0,5 - 4,0 mm Nodpevzxn Rsfx Adbjwc no. of straightening rolls 9 straightening roll diameter 60 mm number of draw-in rolls 2 power requirement 3,8 kW Weight 0,8 t Dimensions (WxDxH) 1,6 x 0,8 x 1,5 m with infinitely variable drive