Used coil lines / coil processing equipment for sale (69)

Condition: used, Year of construction: 1985, Decoiler Decoiler with arm: 1,5 ton Rodpoxdl Nisfx Aa Ujp Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW Standard configuration - Pneumatic clamp roller- Manual disc brake

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Redpfoif Sg Sox Aa Uop Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: good (used), Year of construction: 2021, Pipe winding machine with compression device, pipe winding machine, for metallic pipes, ventilation construction, Duct Winding Machine -Pipe winding machine: Manufacturer HAFLEX Type HSW 992 A -Band thickness: 0.05-0.12 mm -Pipe diameter: Ø 50 - Ø 650 mm -Number of tools: 14 pieces, see pictures -Transport dimensions: 3.3 loading meters -Weight: 570 kg Rodpfx Asyiftdja Uop

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Rsdpov Awguofx Aa Usp Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: new, Year of construction: 2025, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Cutting area 6000 × 1500 mm X‑axis travel 1520 mm Y‑axis travel 6020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L × W × H) 14500 × 2300 × 2380 mm Floor footprint 15500 × 2800 mm Net weight 6000 kg Rodpfew A Ik Njx Aa Ujp Fully automatic cutting, material saving, fast speed

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Rjdpfx Aovuuduja Usp Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1984, material width 300 mm coil weight 0,5 t material thickness 0,4 - 3,0 mm Rsdpovuk Icefx Aa Usp coil internal diameter 420 - 520 mm coil external diameter 1200 mm no. of straightening rolls 9 straightening roll diameter 50 mm number of draw-in rolls 2 diameter of draw-in rolls 50 mm power requirement 1,5 kW weight 1,55 t dimensions (WxDxH) 2,5 x 1,2 x 1,8 m Straightening machine with infinitely variable drive, supporting rolls, 2-point-adjustment of the straightening rolls Decoiler not driven, with pneumatic lag break, manual centralized expansion

Condition: used, material width 320 mm coil weight 2,6 t material thickness 0,5 - 2,0 mm coil internal diameter 400 - 510 mm coil external diameter 1200 mm no. of straightening rolls 7 straightening roll diameter 50 mm number of draw-in rolls 2 band speed 0 - 30 m/min power capacity 1,5 kW weight 1,5 t Dimensions (WxDxH) 2,0 x 1,4 x 1,9 m SPECIAL DEAL Rsdeylcl Ejpfx Aa Uep as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1971, material width 180 mm coil weight 0,5 t material thickness 2,0 - 6,0 mm coil external diameter 400 - 1250 mm no. of straightening rolls 5 straightening roll diameter 70 mm number of draw-in rolls 2 0 roll diameter 110 mm speed 20 m/min power requirement 4,0 kW Weight 2,8 t dimensions (WxDxH) 1,4 x 2,45 x 1,85 m Rodpfx Aajylclfe Ujp SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: excellent (used), functionality: fully functional, Motorized decoiler Manufacturer: GSW Model: AHM 3000 h Condition: very good Decoiler weight: 750 kg Rjdpfxoylychs Aa Uop Max. coil weight: 3000 kg Coil width: 600 mm Coil inner diameter (min.): 380 mm Coil inner diameter (max.): 530 mm Motor power: 2.2 kW Hydraulic pump power: 0.75 kW Rotation speed: 17 rpm Dimensions (W / L): 1100 / 2000 mm

Condition: used, Year of construction: 1988, Ref. No.: Lg 35526 KOHLER Strip Processing Line 18.260/19 - 1000.2H used Year of manufacture: 1988 Direction of operation: left to right Loading side: front Comprising: Double decoiler 1000.2H Load capacity: max. 1,000 kg per side Strip width: max. 260 mm Mandrel expansion range: 460 – 520 mm Outer diameter: max. approx. 1,200 mm Straightening Machine 18.26019 Passage width: max. 260 mm Number of straightening rollers: 19 pcs Roller diameter: 18 mm Straightenable material thickness: 0.3 – 1.5 mm Drive power: approx. 7 kW Speed: 0 – 40 m/min Rjdpfoyb A Swjx Aa Uep Roller adjustment: motorized (2-point) Used, as-is, ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data to follow or upon request. All information is based on manufacturer’s data and is non-binding for us – Subject to prior sale and errors excepted.

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake Rodotgvgpjpfx Aa Uep 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) Rodpfx Aaoq A Tw Re Usp • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: used, Year of construction: 1996, sheet width 360 mm coil weight 550 kg Rjdpfx Aeymp Rdsa Uop coil internal dia. 420 - 520 mm coil external diameter 1600 mm total power requirement 2,2 kW weight of the machine ca. 2 t

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons Rsdew Dd Hpepfx Aa Usp - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: good (used), Year of construction: 1999, Lg 33922 Unwind-straightener combination SOPREM BRH 7-200-80U-1250 BAP strip width max. 200 mm Coil weight max. 1,250 kg Spreading range approx. 380 to 430 mm Coil outer diameter max. 1,300 mm Rsdpfx Aehuwacsa Uep Strip thickness approx. 0.8 to 3 mm Working direction from right to left

Condition: excellent (used), Year of construction: 1995, Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Rjdpfxex Sx Spj Aa Uep Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:1500mm Height:2200mm Weight:3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000326, number of straightening rollers: 7, coil weight: 7,500 kg, coil outer diameter: 1,800 mm, coil inner diameter: 508 mm, product height (max.): 5 mm, number of feed rollers: 2, straightening roller diameter: 50 mm, sheet thickness steel (max.): 5 mm, coil width: 800 mm, Lg 35024 Belt conveyor in long design LORENZ BRM 50/820.7-HH7500.1 Coil weight max. 7500 kg Rjdpetrlzasfx Aa Uop Coil width max. 800 mm Material thickness 0.8 to 5 mm (steel with yield point approx. 300-350 N/qmm) Number of straightening rollers 7 Further data and detailed offer on request.

Condition: used, Year of construction: 2007, machine/vehicle number: 001669, Lg 33121 Single side decoiler ARKU AH 3000/ST-M year of manufacture 1995 belt width max. 600 mm load capacity max. 3.000 kg coil outer diameter max. 1.800 mm Spreading hydraulic Pressing arm hydraulic Decoiler with auxiliary drive and brake coiler chair fixed + reel traversing device with: Lg 33221 High performance belt leveler LORENZ BRM 50/620.9 year of manufacture 2007 Rsdpfx Aajhigmbj Uep Machine no. 001669 passage width max. 620 mm number of straightening rolls 9 Straightening roll diameter 50 mm Material density 0.7 to 6.0 mm Straightening rolls supported several times against deflection All rolls driven by transfer gearboxes and cardan shafts. cardan shafts. Used, in as-is condition from stock, available immediately. On request with overhaul. Delivery time by agreement. Further data shortly or on request.

Condition: excellent (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, coil weight: 2,000 kg, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, spreading range: 900 mm, Dimeco Coil Pick & Tilt Coil Handler Machine Type: Coil Pick & Tilt Handler Model: Coil Pick & Tilt 20 1500 250 Year: 2023 Hours: 10hrs Condition: Excellent Description Electric Powered Truck Specifically Designed For Coil Handling – No manual operation. – Coil tilting is fully controlled safety is improved. – Truck is able to pick up coil from a standard wooden pallet. Technical Specifications Max Coil Weight: 2000kg External Ø (Max): 1500mm External Ø (Min): 600mm Width: 250mm Internal Ø: 508mm Max Height of Forks: 1300mm Forks Thickness: 40mm Distance Between Forks(Open): 1610mm Rjdpfxeu Nx Nzs Aa Uop Distance Between Forks(Closed): 610mm Truck Weight: 1365kg

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, Roller feeder with control system overhauled in 2020, but with low operating hours, due to acquisition of another company. Rsdpfxoyfwcle Aa Uep Manufacturer: DREHER Model: WAV - RDS - 2 E 1125 Year of manufacture: 1993 Condition: very good / ready for use Strip width: 650 mm Material thickness: 0.8 - 7 mm Feed roller diameter: 125 mm, hardened and shot-blasted Feed speed: 137 m / min. Drive: servo motor, three-phase, Siemens Drive power: 5.7 kW Supply voltage: 230 V / 400 V - 50 Hz PLC control with operator panel Functions and settings: - Operation mode selection - Setup function - Preselection for intermediate venting - Feed length selectable in 0.01 mm steps - Speed as percentage - Piece counter up to 99,999 - Machine parameters via NC control - Feed lengths and speed correction possible during automatic operation

Condition: used, Year of construction: 1985, material width 500 mm coil weight 1,0 t material thickness 0,4 - 5,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm material cross-cut 1500 mm² no. of straightening rolls 9 number of draw-in rolls 2 speed 0 - 80 m/min Weight 1,70 t Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m Weight 1,35 t dimensions 2,2 x 1,2 x 2,0 m Rodevut Hzepfx Aa Usp Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm material cross-cut 1000 mm² no. of straightening rolls 10 straightening roll diameter 80 mm number of draw-in rolls 2 roll diameter 120 mm speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 with infinitely variable drive Decoiler BSH 3-500 Redpfxjvut Raj Aa Ujp with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard can be offered without putting into operation or with putting into operation in given condition video at seller's site before dismantling available

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2 x 2,0 t material thickness 0,4 - 3,0 mm coil internal diameter 460 - 530 mm coil external diameter 1500 mm material cross-cut 1200 mm² no. of straightening rolls 9 straightening roll diameter 30 mm speed 0 - 40 m/min Rsdpfx Asv Svaxja Uep power requirement 15,0 kW Weight 5,2 t Dimensions (WxDxH) 2,15 x 4,5 x 2,85 m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound

Condition: used, Year of construction: 1995, material width 650 mm coil weight 7,5 t material thickness 0,6 - 4,0 mm coil internal diameter 460 - 530 (630) mm coil external diameter 1300 mm material cross-cut 1300 mm² no. of straightening rolls 9 straightening roll diameter 60 mm speed 1 - 30 m/min power requirement 30,0 kW Straightening machine KOHLER 50.650/9 with infinitely variable drive, driven straightening rolls, hardchromium-plated rolls, motoric adjustment of the roller cassette Decoiler KOHLER 7500.1 Rodev Ehaqopfx Aa Ujp with auxiliary drive, hydraulic centralized expansion, hydraulic snubber roll, attachment jaws for expansion of the inner diameter to approx. 580 - 630 mm, motoric lateral movement, hydraulic lifting table Servo roll feed WEINGARTEN WEP 65 coil loop control via light guard