Used Section benders shaft diameter 31-50mm for sale
9
35 (600) mm
35 (900) mm
L-beam 50 x 50 x 5 (800) mm
T - beam - web outwards 60 x 7 (600) mm
Axis diameter 50 mm
work speed 4,5 m/min
total power requirement 1,5 kW
weight of the machine ca. 0,4 t
dimensions of the machine ca. 1,1 x 0,8 x 1,5 m
Profile bending machine with:
- Foot pedal right / left
- Recording: wave 50mm
- with digital display
- hardened special steel shafts
- 1 set of standard rollers
G7slnep
- Lower rollers are driven
- Upper roll up and down hydraulically deliverable
- Ho...
1
I - beam section - flat steel 80 x 16 (d1200) mm
I-beam section - upend 50 x 15 (d1000) mm
L-beam 50 x 5 (d1200) mm
Bdq0v2jw
bar material - diameter 40,0 (d800) mm
tube diameter 70 x 2,0 (d1600) mm
square material 80x30x3 (d4000) mm
total power requirement 1,1 kW
weight of the machine ca. 0,49 t
- Lower roller adjustment, both lower rollers can be adjusted hydraulically
- Machine base - horizontal and vertical work use - foot switch
/ Control panel - standard rollers (divided) - 2 driven roll...
8
I - beam section - flat steel 80 x 16 (d 1200) mm
I-beam section - upend 50 x 15 (d 1000) mm
L-beam 50 x 5 (d 1200) mm
round material 40,0 (d 800) mm
bar material dia. max. 70 x 2,0 (d 1600 ) mm
square material 80x30x3 (d 4000) mm
channels - flange UNP 80 (d 800 ) mm
bending speed 4,4 m/min
roll diam. toproll 157 mm
bore 50,0 mm
total power requirement 1,1 kW
weight 485 kg
Bf2jl3ta
Furnishing:
- Lower roller adjustment, hydraulic
both lower rollers can be adjusted
- Machine base
- horizontal...
2
angle steel/side length 40 x 40 x 5 mm
U-iron on the x-axis 80 x 45 x 5 mm
roll diameter - bore 40 mm
roll diameter -toolpieces 150 mm
turning speeds 10 U/min
voltage 400 V / 50 Hz
total power requirement 1,5 kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. 0,8 x 0,92 x 1,4 m
2tf2ge
Machine has standard roller set for profile: Flat (upright) 60 x 10,
manual infeed of the upper roller,
feed path 72 mm,
operation with foot pedal,
working position horizontal or vertical,
Other ro...
1
Shaft diameter: 50roll diameter: 155working speed: 4,5motor power: 1,5length: 750width: 1000heigth: 1400weight approx.: 400
Technical specifications:
- Steel frame
- Two rolls direct driven by a gear system
- Rolls are hardened
- Rolls shafts are special steel material hardened and ground
- Roll shafts housed by bearings
- Standard rolls
- Guide rolls
- Horizontal and vertical working position
Options:
- Digital Readout EURO 550,--
- Angle Lateral Guide Rolls EURO 800,--
...
5
Bending machine ZB 70/3 H ECO
- with foot pedal
- with standard roller set
TECHNICAL SPECIFICATIONS:
- three driven shafts, smooth surface
- hydraulic adjusting of the center roller
- working position horizontal and vertical
- digital readout with memory
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 40 mm
- roller diameter: 152/162 mm
- shaft rpm: 8,5 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 1,1 kW
B3gzcjnf0z
- motor for...
1
Plastic Rollers For Ring Bending Machine Tube Bending Machine Profile Bending Machine
Data:
1 set = 3 rollers
inner diameter 50mm
Groove 14mm
Outside diameter 165mm
For 60,3mm tubes
All sizes available.
Bjnf39orot
5
I - beam section - flat steel 80 x 15 (d600) mm
I-beam section - upend 60 x 10 (d800) mm
L-beam 45 x 5 (d600) mm
bar material - diameter 35,0 (d700) mm
tube diameter 60 x 2,0 (d1000) mm
square material 45x45x3,0 mm
total power requirement 2,25 kW
weight of the machine ca. 0,5 t
dimensions of the machine ca. 780 x 950 x 1450 mm
mit höhere Drehzahl: 6,6 m/min
Ytyzk
1
General performance data
Shaft diameter 60 mm
Roll diameter 177 mm
B22oh377bl
Driven rollers 3
Motor power 3.7 kW
Speed 6 m/min
Flat bars upright (cross section / min. diameter) 70x10 mm / 600 mm; 30x10 mm / 250 mm
Flat bars horizontal (cross section / min. diameter) 90x25 mm / 500 mm; 50x5 mm / 250 mm
Square steel (cross section / min. diameter) 40x40 mm / 500 mm; 20x20 mm / 300 mm
Round steel (cross section / min. diameter) Ø. 40 mm / 500 mm; Ø 20 mm / 300 mm
Tube (cross section / min. diamete...
1
We are manufacturer for the bending rolls and have 500 sets in stock
Note our other offers
Description
Motorized ring bending machine, horizontally and vertically applicable for profiles, tubes and solid material
heavy welded steel construction
horizontal and vertical working possibility
lower rolls motor driven
rollers are hardened
shafts made of steel, hardened and ground
infeed via upper roll
lateral straightening rollers, infinitely adjustable
powerful 400 volt motor
Ca2uksxjfu
left/right r...
1
Shaft diameter: 50Upper Roll Diameter: 152Bottom Roll Diameter: 162high performance hydraulic: 8working speed: 4,5motor power: 1,1length: 810width: 950heigth: 1500weight approx.: 500
Technical specifications:
- Steel welded construction frame
- 3 Rolls are motor driven
- Hardened shafts from special steel material
- Top roll hydraulic moveable up-down
- Horizontal and vertical working position
- Standard rolls
- Guide rolls
- Brake motor equipped for the precision bending
- Mobile control panel
...
6
Bending machine ZB 70/3 H NC
Zopf
- semiautomatic
- with foot pedal
- with standard roller set
TECHNICAL SPECIFICATIONS:
- three driven shafts, smooth surface
- hydraulic adjusting of the center roller
- working position horizontal and vertical
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 40 mm
- roller diameter: 152/162 mm
- shaft rpm: 8,5 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 1,1 kW
- motor for hydraulic: 1,1 kW
- hy...
1
Plastic Rollers For Ring Bending Machine Tube Bending Machine Profile Bending Machine
1 set = 3 rollers
inner diameter 50 mm
groove 14 mm
Dmu7jv3
Outer diameter 165 mm
For 48.5 mm tubes
6
I - beam section - flat steel 120 x 30 (d600) mm
I-beam section - upend 100 x 20 (d2100) mm
L-beam 80x80x8 (d2000) mm
bar material - diameter 60 (d1000) mm
tube diameter 100 x 3 (d3000) mm
square material 50x25x2 (d600) mm
total power requirement 5,5 kW
weight of the machine ca. 1500 kg
Gsjnuywyg
dimensions of the machine ca. 1240 x 1375 x 1540 mm
Furnishing:
- hydraulic roller drive
- Planetary gear delivery of the 2 lower rollers
- for extra small bending radii
- hardened tool holder (42CrM...
7
Characteristics of the machine
Electric bending machine for bending profiles and pipes. The machine is equipped with a mechanically adjustable upper roller pressure. The perfect solution for bending arcs, circles and spirals.
Bending radius can be set with a pressure device with vernier scale on the top
Application: bending profiles and pipes
The possibility of bending various profiles thanks to universal rollers
Very high tare weight for optimal stability
Grinded and hardened guide rollers on ...
4
We are manufacturer for the bending rollers and have1000 sets in stock
Description
motorized ring bending machine, can be used horizontally and vertically for profiles, tubes and solid material
heavy welded steel construction
horizontal and vertical working possibility
lower rolls motor driven
rollers are hardened
shafts made of steel, hardened and ground
infeed via upper roll
lateral straightening rollers, infinitely adjustable
powerful 400 volt motor
left/right rotation by means of foot pedal...
6
Akyapak Akbend ring APK 35 profile bending machine
Description •. base
• horizontal and vertical working
• Foot switch
• Standard rolls (shared)
Bd32p3sff0
• 2 driven rollers
• CE mark / conformity declaration
• User manual in German
Technical details
• I - steel - flat: 120 x 15 (d 750) mm
• I steel upright: 60 x 10 (800 d) mm
• Angle steel: 50 x 5 (1200 d) mm
• Round material: 35.0 (800 d) mm
• Max size: 70 x 2 (1200 d) mm
• Square material: 50 x 40 x 3 mm
• Bending speed: 4.3 m / min
• Diamet...
5
Profile bending machine Zopf
model ZB 60/3 H
TECHNICAL SPECIFICATIONS:
- three driven shafts, smooth surface
- hydraulic adjusting of the left roller
- working position horizontal and vertical
- digital readout with memory
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 35 mm
- roller diameter: 132/142 mm
- shaft rpm: 11 U/min
Li2bldkz
- voltage: 400V 50Hz 3Ph
- drivingmotor: 1,1 kW
- hydraulic pressure:50 kN
- weight: 320 kg
- ...
8
Technical data:
Demonstration machine - unused with warranty
2 rollers hydraulically adjustable
3 rollers driven
shaft diameter: 50 mm
roller diameter: 180 mm
lateral hydr. controlled arm correctors left and right side
machine can work vertical or horizontal
bending capacity round steel: ∅ 45 mm
bending capacity square tube: 40 x 40 mm
Bending capacity flat steel: 100 x 20 mm
Bending capacity angle steel: 80 x 10 mm
Qh8tl
Bending capacity tube: ∅ 80 x 2.5 mm
Motor power: 1,5 kW
CE mark
Control p...
6
Profile bending machine make ZOPF type ZB 70 / 2M
Machine # 00475 Year of manufacture 2000
Technical data:
Bending capacity flat material 60 x 10 mm
or upright 100 x 15 mm
square material 35 x 35 mm
B8df2losme
L-profile 50 x 50 x 6 mm
T-profile 60 x 60 x 6 mm
Shaft diameter 40 mm
roll diameter 152 / 162 mm
Shaft revolutions 8,5 rpm.
Drive power 1,1 kW
weight approx. 395 kg
dimensions approx. 900 x 600 x 1100 mm
with
- CE-marking
- 2 driven rollers
- manual feed of the upper roller
used, in good ...
5
- Shank diameter 50 mm
- Top roller is moved hydraulically
- Digital display
- Can be used horizontally/vertically
- Foot control
- Emergency stop
B9gu2x97yt
- Documentation
- 400V
2
Sahinler profiel bender pk35
Shaft diameter 50mm
Bhjdiwocmk
delivery from stock
2
2-roll driven profile bending machine
Hydraulically adjustable top roller
Shaft diameter: 40 mm
Roller diameter: 152-162 mm
Revolutions: 8.5 per min.
Top roll adjustment: 120 mm
Capacity table: in the attachment
Machine available in various versions:
Yufuyg
Manual adjustment, 3-roll driven etc.
6
Ring Rolling Machine MB 50
- country of origin Turkey
- with standard roller set
Chahmyji
- footpedal
- two drivn rollers
- horizontal and vertical use
- bending capacity round tube up to 60 x3,6 mm
- angle iron 50x50x6 mm
- solid steel 35 mm
- main motor 1,5 kw
- shaft diameter 50 mm
- weight 325 kg
- 400 volt 3 phase
4
Manual adjustable profile iron bending machine make MD Durst type UP 25 plus
Technical data:
Bending roll carrier shaft speed 10 rpm.
driven bending roll carrier shafts 2 pcs.
adjustable bending roll carrier shafts 1 pc.
bending roll carrier journal dimensions 25 x 70 mm
standard bending roll diameter 84 mm
angle steel 25 x 25 x 3,0 mm
T-steel 25 x 25 x 3,5 mm
U-iron 30 x 15 x 4.0 mm
flat iron 30 x 4,0 mm
flat iron upright 50 x 8,0 mm
Square iron 16 x 16 mm
pipes 1/2" / 1/8
drive power 1,1 kW
we...
9
AKYAPAK PROFILE ROLLER
TYPE APK 50
- Axle diameter 50 mm
- Lower two rollers are moved hydraulically
- 3 Rolls driven
- Digital readout
- Horizontal/vertical use
- Emergency stop
- With 1 set of standard steel rolls
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Bvrs9ghclu
Metalworking machines
ENSCHEDE
3
Shaft diameter: 40 mm
Capacities table: in the attachment
Egv2gu0bo
Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pre...
6
AYEL-TECH PROFILE ROLLER
TYPE PK 40
- Axle diameter 40 mm
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- With 1 set standard steel rollers
- With 1 set of plastic rollers for pipe
Bvrshbx0vd
- Documentation
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
3
Bending machine ZOPF new
- model ZB 80/3 H
- with foot pedal
- with standard roller set
Vr7ihu
TECHNICAL SPECIFICATIONS:
- three driven shafts, smooth surface
- hydraulic adjusting of the center roller
- working position horizontal and vertical
- digital readout with memory
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 50 mm
- roller diameter: 192 mm
- shaft rpm: 7,5 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 1,5 kW
- motor ...
7
OSTAS PROFILE ROLLER
Pclmh
TYPE OPK-42
- Spindle diameter 50 mm
- Turns right and left
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
4
Bending machine ZB 80/3 H eco
- with foot pedal
- with standard roller set
- three driven shafts smooth surface
- hydraulic adjusting of the center roller
- working position horizontal and vertical
- digital readout with memory
Gxa0ro
- shafts are supported by conical bearings
- slide bars on the slide
-support are exchangeable
- shaft diameter: 40 mm
- roller diameter: 152/162 mm
- shaft rpm: 8,5 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 1,5 kW
- motor for hydraulic: 1,1 kW
- hydraulic p...
6
AYEL-TECH PROFILE ROLLER
TYPE TB 40
- Shaft diameter 40 mm
Kf7pqkpt
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- With 1 set standard steel rollers
- With 1 set of plastic rollers for pipe 48,3 mm and 10,2 mm
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
5
CARBIDE PROFILE ROLLER
TYPE MB 50
Oxbdd
- Spindle diameter 50 mm
- Turns right and left
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
5
OMACH PROFILE ROLLER
TYPE MB 50
- Spindle diameter 50 mm
- Turns right and left
- Horizontal/vertical use
- Foot-operated
- Emergency stop
Brnxqy7znq
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
6
OSTAS PROFILE ROLLER
TYPE OPK-42
- Spindle diameter 50 mm
- Turns right and left
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
Brnxngpv7e
5
AYEL-TECH PROFILE ROLLER
TYPE DA 40
- Axle diameter 40 mm
- Upper roll is moved hydraulically
- Digital display
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
D8uqzotya
DUTCHMACH
Metalworking machines
ENSCHEDE
6
AYEL-TECH PROFILE ROLL TYPE PK 35 - Shaft diameter 50 mm - Rotates right and left - Horizontal/vertical use - Foot pedal operation - Emergency stop - Documentation - 400V BELFOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE
Brnzjdmaxn
6
AKYAPAK PROFILE ROLLER
TYPE APK 35
Oxbaj
- Spindle diameter 50 mm
- Turns right and left
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
5
ISITAN PROFILE ROLLER
TYPE 3R HPK 45
- Axle diameter 45 mm
- Upper roll is moved hydraulically
- Digital display
- Foot control
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
D8vur2w2y
5
OSTAS PROFILE ROLLER
TYPE OPK-45
- Axle diameter 50 mm
- Upper roll is moved hydraulically
- Digital readout
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- Documentations
Oxbcf
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
3
AYEL-TECH PROFILE ROLLER
TYPE PK 40
- Axle diameter 40 mm
- Horizontal/vertical use
- Foot-operated
Brn7vpf0se
- Emergency stop
- With 1 set standard steel rollers
- With 1 set of plastic rollers for pipe
- Documentation
- 230V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
4
- Shaft diameter 50 mm
- Top roller is moved hydraulically
- digital display
- 2 speeds
- Can be used horizontally/vertically
- Foot control
- Emergency stop
Brny3s0uod
- documentation
- 400V
3
Profile rollers
Oxbe9
5
AYEL-TECH PROFILE ROLLER
TYPE PK 35
- Spindle diameter 50 mm
- Digital display
- Clockwise and anti-clockwise rotation
- Horizontal/vertical use
- Foot-operated
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
Brn2bn0ibk
