material width:150 mm
material thickness:2,5 mm
feed length:100 mm
Yquhow
compressed air:6 bar
clamping force of fastening pincer:2000 N
clamping force of moving pincer:2000 N
feeding force:1200 N
weight:0,1 t
Dimensions (WxDxH):0,35 x 0,85 x 0,5 m
1 pc feeder from press GKP 250, serial no 87'2089
Cxpacav
as per attached photos
Stroke: max. 300 mm.
Belt width: max. 300 mm.
Belt thickness: max. approx. 3 mm.
Incl. valve control and flange plate.
1 piece roller straightener (pull through)
Make: Unknown.
Belt width: max. approx. 400 mm.
5 pieces straightening rollers, adjustable
Roller diameter: 50 mm.
The plant can be visited after arrangement and is immediately available. Free loading ex location.
Beypmv3dlw
Please also note my other advertisements.
material width 300 mm
material thickness 0,1 - 6 mm
feed length mm
run-in height 185 mm
Bjujccfyu0
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. 340 x 700 x 700 mm
Rolling motor: 380V/50Hz Type: BBC MORt 2281 NR: M59639
Power: 75/90 kW
Speed: 960/1460mm
Bckdbiuu
Current consumption. 153/170A
rolling gear: bevel spur gear
Type: Kestermann WH660/50
Power: 122PS / 90kW
Gear ratio 1 : 27,4
Shaft-mounted gearbox:
Type Kestermann SAR 300 AG
Gear ratio 1:1
Pneumatic tong feeder make HEILBRONN type PVS 250/100/80
machine # 205238 year of construction 1993
with attached strip straightener type RLE 27
technical data:
TONG FEED
max. belt width 250 mm
max. strip thickness 3,0 mm
feed length range 5 - 105 mm
max. material cross section 240 mm²
clamping force feed clamp 17,2 kN
corresponding to friction clamping force 34,4 kN
Clamping force holding clamp 5,6 kN
Busvlhzkda
corresponding to friction clamping force 11.2 kN
Feed force 3,0 kN
BAND STRAIGHTENE...
material width:320 mm
material thickness:3,0 mm
feed length:0 - 19999 mm
max. opening of the feeding rolls:7,0 mm
material cross-cut:400 mm²
Dimensions (WxDxH):0,65 x 0,45 x 0,25 m
Weight:0,05 t
Pvtkbm
mechanical feeder
Bv9a2uzl0d
Disassembly and Loading costs: 50 EUR
Belt width max. 140 mm
Strip thickness up to 1.5 mm
Gxrn0n2
Accuracy +/- 0.05 mm
Tensile force 500 N ( 50 kg).
material width 20 - 335 mm
material thickness 0,1 - 4,0 mm
feed length 2 - 300 mm
Chydn7ni
operating pressure 5 - 6 bar
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Stock thickness: 0,5 - 4,0mm
Strip width: 20 - 400mm
Hymqapr
Cross section: max. 2.500 mm²
Diameter of rolls: 120mm
Feeding length: 0,1 – 6.500mm
Execution:
• including bracket
• Upper roll can be released hydraulic
• rolls hard chromed, each with 2 double suspension rolls
• Lateral guidings at entrance
• roller basket
• control and panel on solid stand
• control Siemens S5 with panel PSS300
Including pull threw starightener
Make: ALBA
Type: SRSH 400
Stock thickness: 0,5 ...
Profile widthness max. . 40 mm
Profile high max 20 mm
Sswfdg
Roller Dia 80 mm
Speed max. 40 m / min
Steering CDS 22 Esitron
material width:500 mm
material thickness:- 4,0 mm
feed length:0,01 - 9999,99 mm
number of rolls:2
material cross-cut:1000 mm²
Power capacity:4,6 kW
Weight:0,5 t
Dimensions (WxDxH):1,0 x 0,8 x 1,3 m
Bwjlghshsq
Compact feeding line - the space saver DEMAE-3000/61/300.
The line is fully automatic and it is equipped with pneumatic hold-down arm, speed variation drive system on the decoiler with automatic
adjustment by ultrasound, height regulation of the straightener-feeder,
introduction system for automatic threading, common base, integrated connections cabinet and control panel with colour touch screen.
Blavwhs7pv
Please contact us for more photos and informations !
Belt thickness max.4 mm
Strip width 300 mm
Kbllflzj
Repeatability +/- 0,05 mm
NC drive with compact control
Feed force 3000 N (300 kg)
Belt pressure max. 1,2 to
material width 150 mm
material thickness 2 mm
Bk7zyx7vdh
feed length 185 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. 0,19 x 1,01 m
Width: max. 76mm
Vog8h9r
Feeding length: max. 76mm
Strip thickness: 0,076 - 1,91mm
Speed: max. 195 rpm at full feeding length
Feeding power: 205N
also available in:
- strip width 38...400mm
- feeding length max. 300 mm
- thickness 0,05...3,18 mm
material width max. 100 mm
material thickness max 1,5 mm
Roller Dia 33 mm
Speed max. 20 m / min
Steering CDS 22 Esitron
Bar98whlly
material width:310 mm
Ytws0k
material thickness: - 3,0 mm
feed length:0 - 9999,99 mm
number of rolls:2
roll diameter:80 mm
Material thickness at 310 mm material width:2,8 mm
material cross-cut:850 mm²
speed:104 m/min
power requirement:1,5 kW
width max 300mm
force max 1200N (120 kg)
accuracy +/- 0,05 mm
Wsirkqjy0
thickness 3 mm
Width: max. 38 mm
Feeding length: max. 50 mm
Thickness: 0,05...1,02 mm
W7l0unbz
Strokes: max. 260 1/min
Feeding power: 90 N
can be equipped by mechnical valve or solenoid
Material width max. 100 mm
Material thickness max. 3 mm
Bar9x03j9b
Roller Dia 50 mm
Speed max. 80 m / min.
Steering CNC CPS 20 Esitron
Material width max. 100 mm
Mat. Thickness max. 4 mm
Roller Dia 80 mm
Speed max. 120 m / min
Steering CNC CPS 20 Esitron
Fi283pucw
Used Roll feeds
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Olympic Games: Machineseeker sponsors Team Germany
10 valuable tricks for buying used machines online
Photo gallery: the 10 strongest forklift trucks in the world
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
