Ref. -No.: 10150
Brand: BIHLER
Type of control: CNC
Control: P-CNC 200
Bw9zxa7jjp
Storage location: Halberstadt
Country of origin: Deutschland
hydraulic punch, hand punch, hydraulic press
-without hydraulic unit
-hydraulic punch
-Projection: 65 mm
-Max. Stroke: 75 mm
-Piston rod: Ø 50 mm
-Piston: approx. 65 mm
-Pressure force at 100 bar: 3.3 tons
-Pressure force at 160 bar: 5.3 tons
-Pressure force at 200 bar: 6.6 tons
Qkv3aidgx
-Number: 2x devices available
-Price: per piece
-Dimensions: 340/450/H620 mm
-Weight: 130 kg
One used BIHLER GRM80 multislide punching and forming machine,
year of mfg 1994, German origin.
Complete with Bihler GSE4 tapping device and 2x tapping heads.
Equipped with 5x forming slides and 30 ton press station,
Bmmpt9hbly
gripper feed on right-hand side with strip straightener.
Max width of strip 80 mm. Max wire diameter 5 mm.
Standard feed length 200 mm max.
Max operating speed 250 strokes per minute.
Air clutch. Power supply 400V, 50Hz.
Weight approx 5000 kgs.
Including acoustic cab...
operating pressure: 160 bar
distance between columns: 2000 mm
throat: 1000 mm
operating pressure: pneum. min/max 6/8 bar
operating pressure: hydr. min/max 160/210 bar
voltage: 380/50 V /Hz
table surface area: 1900x1000 mm
height over floor: 1000 mm
tool clamping area: 1600x350 mm
quantity of oil : 400 l
8n2xe3uud
total power requirement: 25,0 kW
weight of the machine ca.: 7,1 t
dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m
dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m
CLIP PUNCHING DEVICE or ...
Control CNC
N2dj2
plate width 4.000 x 2.000 mm
weight of the machine ca. 14 t
Used machine in good condition. Available for immediate delivery.
- Punch diameter max: 114,5 mm
- Control type: FANUC 6M
- Number of index tool stations, max: 2
- Number of turret stations (pcs): 44
- Punching force: 330 kN
- Working area max: 1.525 x 3.660 mm
- Material thickness (punching) max: 6 mm
Imgglwf9c
- Dimensions (long x wide x high): 5.200 x 5.600 x 2.400 mm
- Weight: 14.000 kg
pressure:63 t
no. of strokes:400 Hub/min
sheet width:180 mm
stroke:10 - 80 mm
feed length:150 mm
band width:180 mm
control:KAISER
voltage:380 V
dimensions of the machine ca.:1,85 x 2,70 x 3,00 m
double-column machine with double connecting rods with adjustable stroke, electric rpm control, electric tappet adjustment, pneumatic tappet compensation, Imco individual pressure force monitoring device (split right / left), Unidor tool monitoring system, blower device, original Kaiser gripper fee...
hydraulic punch, hand punch, hydraulic press
-without hydraulic unit
-hydraulic punch
-Piston rod: Ø 70 mm
-Stroke: 75 mm
Metkl
-Projection: 80 mm
-Pressure force at 100 bar: approx. 7.5 tons
-Pressure force at 160 bar: approx. 12.5 tons
-Pressure force at 200 bar: approx. 15 tons
-Number: 1x device available
-Price: per piece
-Dimensions: 250/440/H665 mm
-Weight: 150 kg
One used BIHLER RM40 multislide wire/strip punching and forming machine, year of mfg 1985.
Equipped with 5x forming slides and 9 ton press station.
Gripper feed on right-hand side with strip straightener.
Iz7nerpa0
Max width of strip 60 mm. Max wire diameter 4 mm. Feed length 270 mm max. Max operating speed 350 strokes per minute approx.
Air clutch. Approx weight 3200 kgs.
Power supply 380/400V, 50 Hz.
Bihler RM 40K automatic punching and bending machine
Manufacturer's description, deviations possible.
You are purchasing the machine as shown in the pictures.
Compact machine system for the production of precision punched and bent parts
High production speeds up to 350 1/min.
Perfectly designed for radial and linear tool conceptsStable 90 kN two-point eccentric press with large installation space
Large centre opening for flexible centre punch movements
Quick tool clamping system for shortes...
AMADA EUROPE 258 turret punching machine was built in 2003 and installed in 2004.
Technical parameters:
– CNC control: FANUC 18i-PB
– pressure: 20 tons
– maximum allowable weight on the table: 100 kg
– maximum sheet thickness on the ball table: 6 mm
– maximum size of a punched sheet with an intercept: 1250 x 4000 mm
– maximum punching format, without intercept and with 27 stations head: 1250 x 2000 (Y1300 T2XX: Y10: y1260 T3XX) (X-10 X2010)
– number of axes controlled simultaneously: 3 axes (X,...
LKI300 loading / unloading system
- Control type: FANUC 04PC
- Number of turret stations (pcs): 45
- Number of index tool stations, max: 4
- Punching force: 300 kN
- Working area max: 2.500 (5.000) x 1.250 mm
Bv2mlmd82f
- Material thickness (punching) max: 6 mm
- Dimensions (long x wide x high): 4.673 x 4.120 x 2.450 mm
- Weight: 13.500 kg
sell a Mutifunktionsstanze for locking bars and window handle gear of the company Reynaers.
Ihkhbdl
Viewing by prior arrangement.
hydraulic punch, hand punch, hydraulic press
-with hydraulic unit
-hydraulic punch
-Admission below: Ø 147 mm
-Stroke: mm
-Projection up to the bolt: 245 mm
-Projection without bolts: 1000 mm
-Pressure force at 10 bar: 16 tons
-Dimensions: 1500/515/H1480 mm
Bc37z2ecvt
-Weight: 415 kg
Used FINZER ZUB220 multislide wire/strip punching and forming machine, equipped with 25 ton press station, 7x forming slides and gripper feed on right-hand side. Country of Origin Germany. Year of mfg 1979. Operating speed 25 to 250 strokes per minute max. Strip width max 60 mm. Wire diameter max 3 mm.
Khwcfahr
Type: TC500
Year of manufacture: 1992
P9fpqf
S4
Mvfvvx0r
Sheet length 3100 mm
sheet width - min. 300 mm
Sheet width - max. 1524 mm
Operating hours 79,447 h
P4
Sheet length - max. 3100 mm
Sheet length min. 408 mm
Sheet width - max. 1500 mm
Sheet width - min. approx. 258 mm
Sheet metal height - max. 160 mm
sheet thickness 1,5 mm
Operating hours 77,190 h
Used machine in good condition. Available for immediate delivery.
- Pressure force: 80 t
- Bending length: 2.500 mm
- Axes: 2
Dyc0hi
sold is a multifunctional punch for facade profile end of the brand Reynaers.
Viewing by prior arrangement.
Oz909
dimensions of the machine ca.:2,6 x 1,0 x 2,2 m
pressure:40 t
sheet width:150 mm
stroke:8 - 70 mm
number of strokes - stepless:60 - 300 min-1
ram surface:340 x 320 mm
ram adjustment:70 mm
table-size:550 x 580 mm
Working width max.:210 mm
column travel -side:250 mm
hole in the table:400 x 90 mm
clamping plate thickness:60 mm
boring of tool-holders:Ø 40 x 80 mm
groove width:30 mm
flute depth:6 mm
distance between columns:560 mm
weight of the machine ca.:3,8 t
total power requirement:7,5 kW
Sr3qdk
One used BIHLER MACH05 multislide punching and forming machine,
equipped with 4x forming slides, 50 kN capacity, and 25 & 10 ton press stations. One gripper feed on right-hand side, and one gripper feed on left-hand side. Standard feed length 200 mm. Max width of strip 40 mm. Max wire diameter 5 mm. Max operating speed 450 strokes per minute. Air clutch. Power supply 380V, 50Hz.
Weight approx 6000 kgs.
Buuscb0n0x
Type: TC200
Year of manufacture: 1997
Control type: Bosch
Well maintained TC200 from 1997,
fully functional
currently connected to power
incl. 10 tool cassettes
Bckpl2
Machine has been regularly serviced and repaired by Trumpf if necessary
Offer punching machine for blinds production. Punching tool for profiled 50 mm slats and threading device for 25 and 35 mm interior blinds.
Phjwz
In addition there is a punching machine from Perma for head slats.
Dismantling and transport by the buyer.
More pictures on request.
-integrated hydraulic punching and shearing machine
-manufacturing year 2000
-Siemens Sinumerik 840D CNC control with Finn-Power interface
-maximum sheet size 1500 x 3000 mm and with re-clamping 4000mm
-turret with 20 stations (see turret layout below)
-punching force 30tn (300kN), maximum 8mm mild steel
-shearing unit with ACS (automatic clearance setting), maximum 3,5mm mild steel
-three (3) clamps with automatic clamp setting
-automatic loading device with two loading tables
-tapping unit Suh...
Punching and notching machine: KUNZ/Boschert KST 20/450
Capacity:Sheet thickness: Steel 6,0 mm
year of construction:
Weight:2400 kg
Location:Weiterstadt
DescriptionKunz/Boschert punching and notching machine KST 20/450
- manual tool change
- tools
- Machine including numerous round, square, oblong hole and separating punching tools
- he stop rails are manually adjusted and clamped on the table by means of a scale embedded in the table, the stroke is triggered fully hydraulically via foot pedal.
...
pressure:30 t
no. of strokes:135 - 800 Hub/min
sheet width:198 mm
table-size:540 x 460 mm
stroke adjustable from - to:12 - 40 mm
distance between columns (le-ri):330 mm
:280 mm
dayligth:270 mm
ram - range of adjustment:+/- 20 mm
ram head dimension:ø250 x 25 mm
feed::Links
feed length:12 - 60 mm
hole in the table:330 x 80 mm
roll surface width:115 mm
weight of the machine ca.:3 t
dimensions of the machine ca.:1,1 x 1,2 x 2,1 m
Gxhx7todo
high speed triple-column design, BRUDERER BBV 190-85 feede...
Two Bihler GRM80 machines are currently undergoing partial refurbishment in our UK workshop. These are standard machines that will each be fitted with 30 ton press unit, 5x forming slides & new strip straighteners. Both machines will be equipped with NEW Bihler BC R control systems (RETROFIT SYSTEM) with the possibility of a remote connection to the Bihler Service Department and new hydraulic and pneumatic systems, roller chains and clutch & brake combinations.
0vzocjf2
Please contact us to re...
Trumpf Trumatic 2000 R
Operating hours 29224
Bwdlq7ma9m
Max. cutting force 180 kN
Type 9110 No: 700340
Year of manufacture 2000
Mains 400 V/ 50 Hz
Connected load 17kVA
Supply voltage:
Control voltage 24 V=
Required fuse protection 3x35 A
Compressed air supply 7-14 bar
Machine weight 9200 kg
Machine has not been connected power for 2 years.
Autom. stamping press (30 tons)
SMA-REF-6695
Type: eccentric presses
Manufacturer: Bruderer
Coryt2x
Model: BSTA 30
Year: 1985
Pressure: 30 tons
Stroke speed: 100 - 600 strokes/min
Stroke: 8 - 40 mm
Stroke adjustment: 40 mm
Condition:
ready for action
under power
Location: Western Germany
Dimensions:
1.200 x 1.200 x 2.150 mm
2,5 tons
Availability: on demand
Terms of delivery:
ex works
free on truck
Terms of payment: 100% before dismantling/loading
Used machine in good condition. Available for immediate delivery.
- Operating hours: 5.252
- Pressure force: 85 t
- Bending length: 2.550 mm
- Axes: 6
- Distance between uprights: 1.750 mm
- Working speed: 1-10 mm/seg
- Throat: 410 mm
- Stroke max: 215 mm
- Power: installed max: 7,5 kW
Buwvtayhzk
- Dimensions (long x wide x high): 2.680 x 1.950 x 2.375 mm
- Weight: 8.320 kg
Machine Type: EPR 100
Factory No.: 10338
year of construction: 1965
pressure force norm. kg: 100000
ram stroke H: mm 12 - 140
Stroke rate: rpm 50
Working stroke h30° vUT: mm 9
Working capacity: mmt 900
Ce2yk7ps
Subject to changes and errors in technical data, information and prices as well as prior sale.
pressure:7 t
plate thickness:2 mm
sheet width:40 mm
no. of strokes:30-400 Hub/min
stroke of normal slide:50 mm
current:10 A
frequency:50 Hz
voltage:380 V
control voltage:24 V
total power requirement:2,8 kW
weight of the machine ca.:1,8 t
dimensions of the machine ca.:2,0 x 1,2 x 1,9 m
1 drive
1 middle stamp movment
2 normal slide aggregate
2 wide slide aggregate
1 material feeding right 240 mm
1 straightener
1 eccentric press 7 to.
Gxjnshczc
Machine is in very good condition, only less workin...
One used Finzer ZUB200 multislide wire/strip punching and forming machine. Equipped with 4x forming slides and 6 ton press station.
Gripper feed on right-hand side.
Air Clutch, central mandrel/ejector.
Bty3umpu9x
German origin. Year of mfg 1970.
Vipros 357
Frame Construction Bridge Type
cnc control Fanuc 04PC
Press Capacity 30 Tonnes (294kN)
Press Type Servo Controlled variable Hydraulic Ram
H8lk8mf
Axis Traverse Distance 1270 mm x 1830 mm
Workable Max. Sheet Size 1270 mm x 3660 mm
max material thickness 6.35mm MS
Max. Material Weight ) 120 kg
Max. Hole Dia. 114.3 mm
Number Of Stations 58 Stations: 36 x 12.7 mm 12 x 31.7 mm 2 x 50.8 mm 2 x 88.9 mm 2 x 114.3 mm
auto-index stations 2 x 31.7 mm
H...
(Please state your offer price)
Sales only within Europe, incl. Turkey
Price without packaging; terms of delivery: FCA (machine location)
=====
Technical data see handout.
Bv7xm2gu89
Any warranty is excluded.
For the correctness of the technical data and year of manufacture,
for the completeness of accessories and tool equipment,
and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations, we do not assume any warranty.
No sale to...
Used machine in good condition. Available for immediate delivery.
- Operating hours: 5.252
- Pressure force: 85 t
Dpkxnvn
- Bending length: 2.550 mm
- Axes: 6
- Distance between uprights: 1.750 mm
- Working speed: 1-10 mm/seg
- Throat: 410 mm
- Stroke max: 215 mm
- Power: installed max: 7,5 kW
- Dimensions (long x wide x high): 2.680 x 1.950 x 2.375 mm
- Weight: 8.600 kg
Eigenschaften
Multitool mit 6 Positionen
CE photoelektrisches Sicherheitssystem
Software "Fim Punch OEM"
B0n9efzs
Spannung: 400V 50Hz
Baujar: 2002
Preisanfrage
- With this plant we produce bottom plates for tank containers.
For different Ø (from 1.600mm , 1.800mm , 2.200mm, 2.500mm, 3.000mm)
- The plant is currently not in perfect condition.
- The plant is NOT CNC or NC controlled
Bbjj8wxg
- Number of supports : Cross support 2
Changes and errors in the technical data, information and prices and subject to prior sale.
One used BIHLER RM35 multislide wire/strip punching and forming machine, year of mfg 1983. Equipped with 5x forming slides and 7 ton press station, single gripper feed on right-hand side with straightener. Air clutch. Weight approx 2000 kgs. Max width of strip 32 mm. Max wire diameter 3 mm. Standard feed length 170 mm. Max operating speed 250 strokes per minute.
Cnt0sumo
Brand new 2metre x 6mm sheet metal bending rolls for sale
UMS BENDING ROLLS SPEC:
Bending Length (mm): 2070
Roll Diameter (mm): 190
Front Bending Capacity (mm): 6
Bending Capacity (mm): 7
Min.Bending Diameter Q: 285
Motor Power (KW): 4 – 1,5
Dimensions UxGxY (mm): 3750 X 920 X 1260
Weight (kg): 3480
3R roll bending machines are used for rolling the sheets with light, medium and heavy materials of aluminium or stainless steel. Thanks to their strong welded steel body, the hydraulic movement thr...
Edel HM 25/250 KE
150/4 mm
Lm8p3py
Highest performance: 25t
4mm at 40 kp/mm^2
Used machine in good condition. Available for immediate delivery.
- Operating hours: 17.967
- Table width L -R: 120 mm
- Inclination of beam: +-10 mm
- Pressure force: 130 t
- Bending length: 3.060 mm
- Axes: 6 (Z1, Z2, X1, X2, R1 y R2)
- Distance between uprights: 2.690 mm
- Working speed: 1-10 (Y) mm/seg
Hhpqwfbrq
- Working speed: 500 (X) mm/seg
- Working speed: 300 (R) mm/seg
- Throat: 410 mm
- Control: TRUMPF
- Stroke max: 215 mm
- Oil tank capacity: 250 l
- Power: installed max: 18,5 kW
...
Technical data
Bvogoucqpq
Working length 8000mm
Thickness 1.25mm
CNC 500
Automatic Back gauge
Year 2006
TotalBend LK1500x3- duct bending, multidecoiler
Automatic line for duct's bending, designed for ventilation industry. The line realize following tasks: steel sheet decoiling, straightening the plates, stiffening the plates, cutting and bending with specified duct's dimensions. The line may be equiped with many decoilers, that allows to have many types steel ready for processing. Automatic selector which holds up to 4 sheets of steel makes fast rearming of machine.
Metal sheet of thickness from ...
One used BIHLER GRM50 multislide strip-punching and forming machine, equipped with 5x forming slides, 25 ton press and gripper feed on right-hand side. Air clutch. Weight approx 3700 kgs. Max width of strip 40 mm. Standard feed length 320 mm. Max wire diameter 5 mm. Max operating speed 250 strokes per minute.
Bmmpnw8lhd
Machine visible in production in the workshop.
Available immediately
F9zicq2
Efficient punching
The Jörg manually operated punching machine meets a need for technical services, production companies, schools and workshops, to punch accurately. The punches and dies are easy to change and the stripper ensures that the sheet doesn't get stuck.
The stops on the wide work table are easy to set and read on a mm scale. A standard set of punches is included. For serial production a hydraulic version is available.
Made in the Netherlands.
Bjwswrg7h7
Technical details
- Capacit...
Used machine in good condition. Available for immediate delivery.
- Operating hours: 5.252
- Pressure force: 50 t
- Bending length: 1.275 mm
- Axes: 5
- Distance between uprights: 1.750 mm
- Working speed: 1-10 mm/seg
- Throat: 410 mm
- Stroke max: 215 mm
- Power: installed max: 7,5 kW
Gjr08ykmc
- Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm
- Weight: 4.750 kg
Engine number 49597,
Design: hydraulic punching machine with 4 punching units,
Pressure force: 4 x 250 bar,
Passage: 870 mm,
Isnmlsiz
Table: 870 x 830 mm,
Drive: 21.5 kW,
Remark:,
2 material support tables each 3050 x 1000 mm,
with stops and clamping devices,
Weight: 3800 kg,
Punch bending machine MRP - UB4
Hymabxz