Used Press brakes with 50-74t bending force for sale (78)

Condition: used, Year of construction: 1988, Amada Promecam ITS 5020 CNC Pressbrake With Promecam CNC MB Control Guedpfx Aexnb Ehoacoh Maximum Tonnage 500 KN. Maximum Bending Length 2,000mm. Working Top Height 960mm. Intake 370mm. Maximum Stroke 105mm. Goose Neck 400mm. Sideplate Entry 1,690mm. Approx Speed 85mm/sec. S/No. ITS 050 20 107 (1988). With Assorted Tooling, Sick Safety Curtain & Foot Switches. Overall Dimensions W2,500 x D1,745 x H2,180mm. Weight 3,450kg.

Condition: used, Promecam CTH425 Powered Guillotine, Force 1300, Course 110, 2400mm Wide, Light Guards at Rear. S/No. 220. Country of Origin: France Pre-auction offers considered. Gusdpfx Aajxnl Itecsh Please Note: These lots are located in Hertfordshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, functionality: fully functional, Year of construction: 1998, Used Baykal press brake Type: APH 2604 X 60 Capacity: 2500 x 60 tons Gedpsxnqdmsfx Aaceuh Electric backgauge Electric depth adjustment 1 set of tools Year of manufacture: 1998

Condition: good (used), AMADA PROMECAM APX 50.20 CNC 7 AXIS PRESS BRAKE Gjdpfsuad Nfox Aacsuh MAKE AMADA MODEL PROMCAM APX 50.20 YEAR 1995 CONTROL OPERATEUR 2 CAPACITY 50 TONS BENDING LENGTH 2050.0 mm OPEN HEIGHT 370.0 mm STROKE LENGTH 100.0 mm THROAT DEPTH 400.0 mm MOTOR POWER 9 KW TBC WEIGHT 6400 KG PLUS 7 AXIS- Y, R1,R2,X1,X2,Z1,Z2 COLOURED GRAPHIC SCREEN FULL SET OF TOOL CLAMPS SICK OPERATOR SAFETY LIGHT GUARDS

Condition: good (used), Edwards Pearson 60ton x 2500 mm. 4 Axis Back-gauge. In original condition. Just Serviced. with Manuals. can load to suitable transport. Taken back in PX will take £6500 Gusdpfxsxfcd Te Aacsh

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 60 t, working width: 2,550 mm, number of axes: 8, type of crowning: CNC-controlled, pressing force: 60 t, working range: 2,550 mm, Equipment: CE marking, documentation/manual, lower tooling, safety light barrier, upper tooling, Used quality 2005 BYSTRONIC EDWARDS PEARSON PR60 x 2550 8axis cnc Press Brake for sale High specification and highly accurate Cnc downstroke pressbrake for sale – Video at the bottom of the listing running in our stock Bed length 2.5metre Year / new: 2005 Model: PR60x2550 Capacity / tonnage: 60ton / 600KN Complete with quality Swiss made Cybelec MODEVA 12 CNC Control 8axis in total – Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Max stroke 215mm Hydraulic crowning Godpfx Aajwihk Aecjuh Hydraulic tool clamping system FIESSLER Light Guard System Associated Tooling – per photographs Fully serviced with Bystronic uk

Condition: used, functionality: fully functional, Year of construction: 1992, control type: CNC control, pressing force: 50 t, Equipment: CE marking, angle measuring system, angle stop, centralized greasing system, documentation/manual, emergency stop, european tool clamping system, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Amada press brake Gedpfxewt Rfqj Aacouh Type ITPS CNC DELEM DA-GSR Year 03/02/92 Capacity 2 m 50 t Complete with tooling

Condition: good (used), Bending length / working length: 2,500 mm Pressing force / bending force: 1,500 kN (≈ 1,500 kN) Max. sheet thickness (steel): approx. 2.0 mm Max. sheet thickness (aluminium): approx. 3.0 mm Max. sheet thickness (stainless steel / higher tensile strength): approx. 1.25 mm Guedpfexgh T Ajx Aacjh Max. bending height: approx. 300 mm (depending on model) Power / capacity (electric): 24 kW Machine dimensions: 4,050 × 1,600 × 2,400 mm Weight ~ 13,000 kg

Condition: good (used), Year of construction: 1990, Press force: 50 t Bending length: 2085 mm Distance between uprights: 1690 mm Stroke: 105 mm Throat depth: 400 mm Table height: 960 mm Gsdpfxexnyi Sj Aacsuh Total power requirement: 6.5 kW Machine weight approx.: 3,450 kg Space requirement approx.: 2500x1800x2200 mm

Condition: good (used), Year of construction: 1998, pressure 50 t chamfer lenght 1250 mm distance between columns 1070 mm Stroke beam 100 mm Gsdpfjxl E Tkex Aacjuh max. opening beam/table 370 mm C-recess 300 mm max travel X-axes 400 mm R1 and R2 axis controlled by cnc 100 mm Z1+Z2 axes controlled by cnc manuell mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 56000 h length 1600 mm width 1500 mm height 2000 mm weight 2600 kg total power requirement 2,5 kW dimensions of the machine ca. 2x2x2 m weight of the machine ca. 2,56 t All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: new, Year of construction: 2024, Bending capacity: 60t Bending length: 1250 mm Distance between uprights (mm): 1050 Material thickness: 7.5 mm Stroke length (mm): 265 Gjdpfed E If Sox Aacouh Throat depth: 410 mm Installation height: 530 mm Operating speed Y (mm/sec.): 10 Motor power (kW): 7.5 Operating speed X (mm/sec.): 250 Length (mm): 2300 Width (mm): 1550 Height (mm): 2750 Weight (kg): 3,100 Standard equipment: Y1, Y2, X, R (4 axes) X = 650 mm X, R Control unit: DURMA DT15 European clamping system 60 mm die holder (only for European dies) Throat depth: 410 mm Backgauge: Siemens DC servo-driven, linear guide & ball screw system Protective cover Special accessories: European upper tool P97.75.R08 (one in segmented design) European lower tool M.460R.85 (one in segmented design) DURMA quick clamping system CE with manual F.AKAS II M -FPSC-B-C + safety cover & switch Other machines are available for demonstration at our Staufenberg location. Further information available upon request.

Condition: good (used), Year of construction: 2016, Servo Mechanical pressbrake TS1 Toucscreen controller WILA Mechanical tool clamping Delta-X and R Axis backgauge Fast high speed pressbrake Less power consuption and no hydraulic pump ! Guedpexc Hkxjfx Aacjh High speed accurate bending  Max. bending length: 2040mm Distance between column: 2040mm Max. pressing force: 50T Dis. Beam - Table: 590mm Beam stroke: 300mm Approch speed: 9600mm/min. Working speed: 3000mm/min. Adjustment X-Axis back gauge:0 - 1000mm Number of controlled axis: 4 Length: 3030mm Width: 1775mm Height: 2510mm Weight: 6100kg

Condition: like new (used), pressing force: 70 t, – Capacity 1600 x 70 tons – NC control (touchscreen) – 2 hydraulic cylinders Gujder Rtb Uopfx Aacsh – Foot control – Photoelectric safety guard – Emergency stop – Relief – Documentation – 400V

Condition: new, The AHK M 2160 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brake category. This machine balances proven technology with modern safety standards, offering an inexpensive NC alternative to traditional CNC press brakes. With its robust, stress-relieved welded steel construction and precise upper beam positioning thanks to a torsion shaft, it ensures top performance for bending operations. The user-friendly touchscreen interface allows operators to directly position the back gauge in the X and R axes, or utilize stored bending sequences for automatic operation. Each machine features a motorized back gauge and supports extensive bending tools, significantly reducing tool-changing times. Safety is paramount, with features compliant with the latest CE regulations. Whether you’re working on recurring materials or complex contours, the AHK M 2160 NC excels in productivity and precision. Order online today to enhance your sheet metal processing capabilities with this reliable press brake. Gjdpfeuyin Nsx Aacouh

Condition: used, Year of construction: 2004, Gebruikte CNC-kantbank van Jean Perrot Type: S 60250 Capaciteit: 6100 x 250 ton Gjdpfxewz Ixwj Aacouh Bouwjaar: 2004 Cybelec DNC 800 CNC-besturing Y1-, Y2-, X- en R-as CNC-gestuurd

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 100 h, machine/vehicle number: C121043, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 44 t, working width: 1,300 mm, stroke length: 270 mm, distance between stands: 1,230 mm, installation height: 470 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, number of axes: 4, type of crowning: manual, back gauge adjustment: CNC-controlled, overall weight: 2,400 kg, total length: 2,350 mm, total width: 1,220 mm, total height: 2,100 mm, power: 5 kW (6.80 HP), input current: 32 A, warranty duration: 36 months, pressing force: 44 t, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Compact Electric Press Brake C12 CoastOne - Made in Finland Press force: 44T Bending length: 1300mm Spindles: 2x22T Control: TC15-2D Graphic Backgauge: 2-axis controlled X-R axes Bending tool holder: Type A / R1 / ES Style / AMADA Promecam 1x set of bending tools included 36-month warranty after installation Delivery not included; available immediately Inspection under power is possible at any time by appointment! Guodpfx Aoxd U S Toacsh

Condition: used, Year of construction: 2004, pressure 50.0 t chamfer lenght 1275 mm distance between columns 1040 mm column arm 250 mm ram stroke speed 225 mm/sec work speed 0 - 9.8 mm/sec return speed 160 mm/sec work stroke 215 mm dayligth 512 mm table height 800 mm back stop - adjustable 600 mm control DELEM DM 51 operating pressure max. 300 bar oil volume 150 ltr. voltage 400 V engine output 6.0 kW Weight 4300 kg range L-W-H 1930 x 1510 x 2390 mm current new price approx. 80.000 euros special price on request good / well-maintained condition (!!) - in checked condition - machine video - ?v=5L8L2AYv0PU ----- PLACKE electro-hydraulic CNC press brake specially developed for the production of small parts The advantages: • Low energy consumption • High operating comfort • Wide range of applications • Fast, robust, low-noise • With CNC control as standard ----- Equipment: - CNC electro-hydraulic press brake with 1x working cylinder - DELEM CNC control model "DM 51" Guodpfx Asxab U Heacsh - CNC controlled axis: Y1 - Y2 - X - CNC electro-motorized back stop * Travel path: X = max. 600 mm * Travel speed X axis .. max. 300 mm/s * Positioning accuracy .. +/- 0.02 mm * with 2x manually adjustable stop fingers (R+Z axis) - WILA standard - manual upper tool clamping - WILA standard - manual lower tool clamping - PLACKE safety device at the front: light barrier - side protective device (swivel doors) - rear protective device (swivel + lockable door) - front storage area - side sorting system for bending tools - 1x freely movable foot control - original operating instructions including circuit and hydraulic diagram

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Safan electric press brake type SMK-K-50-2550 TS2 Godpew Uf I Iefx Aacsuh working width 2550 mm max. pressing force 50 tons Safan CNC control with touchscreen, type TS2 CNC-controlled Y-X-R-Z1 and Z2 axes including a set of tools

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 60 t, working width: 2,550 mm, number of axes: 6, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, lower tooling, safety light barrier, upper tooling, High Quality, fully serviced and well maintained used Edwards Pearson pr6 cnc pressbrake for sale Edwards Pearson PR6 60 / 2550 CNC Pressbrake 2.5metre x 60ton / 2550mm 4 axis back gauge – z1, z2, x and r axis – 6axis in total Crowning for your thinner gauge steels Cybelec cnc control Gujdpfow I Dknjx Aacjh Machine in good working condition including a good selection upper & lower Pressbrake tooling Serviced by Bystronic uk We can deliver to your works, install and offer tuition with your operators as well as quote new tooling to make your sheet metal products on this machine.

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) Guodoxabutspfx Aacoh - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 2024, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable max. 800 mm oil volume 150 ltr. voltage 400 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm Demonstration/demo machine (!!) From our showroom (like new) With very few operating hours ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds Gedpfoxabt Aex Aacjuh ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: new, pressure 60.0 t chamfer lenght 2100 mm distance between columns 1700 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm oil volume 150 ltr. voltage 400 Volt total power requirement 7.5 kW weight 5640 kg range L-W-H 3250 x 1960 x 2750 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity Gjdpfx Aajxabckeceuh - User manual: machine and control in German - Safety manual: press brakes

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 135 mm/sec work stroke 275 mm Gedexaax Repfx Aacsuh dayligth 550 mm table height 900 mm table width 90.0 mm oil volume 200 ltr. voltage 400 Volt total power requirement 15.0 kW weight 9450 kg range L-W-H 4250 x 2150 x 2800 mm ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

Condition: used, Year of construction: 2008, pressure 56.0 t chamfer lenght 1400 mm distance between columns 1300 mm throat 220 mm stroke 200 mm dayligth 485 mm work speed 8.0 - 10.0 m/min return speed 35.0 mm/sec Control CNC Boschert back stop - adjustable 0 - 370 mm work height max. 915 mm Cylinders : 2 Stück Guodpfxsxaanxe Aacoh voltage 3x 400 V connected load 8.0 kVA weight 3700 kg range L-W-H 2320 x 1280 x 2030 mm very good / well-maintained condition (!!) with lots of bending tools - in checked conditions - machine video - ?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) * with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = double-acting cylinder - upper beam made from a solid steel plate - pressure gauge for pressing pressure (infinitely adjustable) - 2x front support tables - 1x freely movable foot switch - robust machine base - rear protective device (cover + circuit breaker) - original operating instructions (machine + control)

Condition: used, Year of construction: 2004, pressure 60.0 t chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm working feed 10.0 mm/sec return speed 61.0 mm/sec stroke 100 - 140 mm dayligth 450 mm table height 860 mm oil volume 100 ltr. Control ELGO P8822 operating pressure max. 200 bar Number of working hours ca. 2.370 h voltage 380 V total power requirement 5.5 kW weight of the machine ca. 5000 kg. range L-W-H 3000 x 1850 x 2050 mm good / well-maintained condition (!!) with only approx. 2,370 operating hours current new price approx. 60.000 euros special price on request in checked conditions - machine video - ?v=PsUeM3O5wAM Equipment: - NC electro-hydraulic press brake - with ELGO NC control unit "P8822" * Input of target/actual values ??for back stop * Input of target/actual values ??for depth adjustment ` * swiveling operation, front left * manual mode selectable - NC controlled axes: Y1 + Y2 + X - NC electro-motorized back stop, on ball screws * with 4x manually adjustable stop fingers * adjustment in R+Z axis (manual) - Upper tool holder SYSTEM A (AMADA), with upper wedge crowning * 1x split set of upper tools * clamping jaws with clamping lever (quick clamp) - 1x universally rotatable MULTI V die block - 2x side-hinged doors (protective device) Gjdpfsw U U Ttsx Aacjuh - 1x rear sliding door (protective device) - 2x front stable support arms - 1x freely movable foot control (on rollers - movable) - Operating instructions (PDF)