Used crimping and flanging machines for sale (68)

Condition: used, Year of construction: 2005, sheet width 3050 mm plate thickness 16 mm distance between columns 3100 mm no. of strokes 16 Hub/min back stop - adjustable 10 - 1000 mm cutting angle 0,5 - 2,5 ° down holder 13 Stück oil volume 300 l total power requirement 22 kW weight 14000 kg dimensions 4100 x 2300 x 2000 mm Features: - Electro-hydraulic slide-guided sheet metal shear - With ELGO P9724 NC digital control unit * Input of target/actual values from the backgauge possible * Digital display - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Front finger guard - 1x sturdy side stop, with T-slot & mm scale - 3x front support arms - Hydraulic sheet metal hold-down - 2x emergency stop buttons at the front - Rear safety guard (protective grille) Gisdpfxoyzi Nws Acwor - Original operating manual * Special accessories included: - Backgauge system conveyor belt * with pneumatic sheet metal holding device * Conveyor belt with pneumatic scrap diverter * Return to Sender (sheet metal discharge to the operator)

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm Giedpfsh Hgdrsx Acwor connected load 5,5KW max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons

Condition: new, - Capacity 2.5 mm - Hydraulic roller adjustment - Axle length 250 mm - Ejection 160 mm Giodpfouray Ssx Acwsr - Roller diameter 96 mm - Foot control - Brake motor - With 4 roller sets - Emergency stop - Documentation - 400V

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Right and left rotation Gedjywx Hdopfx Acwsir Weight: about 500 kg Further sets of rollers available on request

Condition: good (used), Year of construction: 1980, machine/vehicle number: 80416010, Offer 26017 Technical data: - Max. working throat: 250 mm - Working depth: 217 mm - Roller center distance: 80 mm - Max. material thickness at 40 kg/mm² strength: 1.75 mm - Steplessly adjustable working speed - Forward and reverse operation - Drive: 400 V, 1.1 / 1.4 kW Gedpfxjyzf I Aj Acwsir - Required space approx.: W 500 x H 1450 x D 655 mm - Weight approx.: 250 kg - Includes: electric foot switch, roller sets, guide apron

Condition: repair required (used), Year of construction: 2013, Electric Guillotine Schechtl MSB 310/NCH Specification: Model: Schechtl MSB 310/NCH Manufactured in: Germany Year of manufacture: 2013 Working length: 3100 mm Maximum cutting thickness: 2.0 mm Back gauge: automatic Control system: NCH Giodpfxsy Amhgs Acwsr Other: There are some control panel issues. One engine mounting lug is missing (this does not affect functionality). If you have any further questions, we will be happy to answer them.

Condition: used, Fasti 417 Beading and Flanging Machine with motorized drive and hydraulic adjustment of the upper roll Condition: Used Technical data Type 125/3 Capacity: 3.0 mm Roller center distance: 125 mm Throat depth: 500 mm Working depth: 430 mm Drive 2 (standard): 1.5/2.5 kW Drive 3: 3.0 kW Hydraulic drive: 0.75 kW Details Without rolls Without back gauge Gear motor with pole-changing capability V06/12 m/min. Gjdpoyxdl Iofx Acwoir

Condition: ready for operation (used), Fasti Beading Machine Size 4 150 x 4mm Output Max. Throat 500mm Hydraulic adjustment of the top roller via foot switch Right/left rotation Continuous speed adjustment via handwheel Gedpfx Ajv Tqy Nocwoir 60mm Mount Weight approx. 1500kg with accessories Year of manufacture 1963 Space requirement approx. 1000x1000x1750mm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 15050, throat depth: 250 mm, roller center distance: 63 mm, overall weight: 100 kg, total width: 400 mm, total length: 800 mm, total height: 1,212 mm, mount diameter: 25 mm, input voltage: 230 V, For sale is an as-new, unused bead and flanging machine, model RAS EasyFormer 12.35-3. This machine is a genuine high-performance tool for sheet metal processing, distinguished by its “Innovation Made in Germany” and ready for immediate use. Special Highlight: The AutoTeach Function! This intelligent control system learns from the operator. It records the beading or flanging process in manual mode and then repeats it fully automatically. This guarantees maximum repeatability for series production and an extremely short training period for new personnel (memory for 20 standard programs). Technical highlights & features: • Condition: Unused / As new. • Control: Modern 7" touch control panel with storage for up to 20 standard programs. • Split back gauge with ground stop plate (360 mm x 330 mm). • UnLock footswitch (1 included in delivery). • Capacity: Processes sheet thicknesses up to 1.75 mm (at 400N/mm2). • Working area: Maximum working depth (throat) of 250 mm. • Speed: Infinitely variable from 0–28 m/min via sensitive footswitch with soft start. • Safety: Unique UnLock safety function – immediately opens the upper roll in case of danger or electrical overload. • Connection: Simple operation on a standard 230V socket. • Fine adjustment for lower shaft for precise roller contour positioning. Comprehensive roller package included: The machine comes with five high-quality roller pairs for various applications (the rollers are also as-new/unused). For details on the included roller pairs, please refer to the pictures in the advert: 1. Flanging rollers FL 2. Swaging rollers BB 3. Forming rollers V3 4. Beading rollers S4 5. Edge forming rollers ZA Key technical data RAS EasyFormer 12.35-3 at a glance: • Max. sheet thickness at 400N/mm2: 1.75 mm • Roller center distance: 63 mm • Max. working depth (throat): 250 mm • Throat height: 18 mm • Roller shaft diameter: 25 mm • Working height: 1000 mm • Infinitely variable working speed depending on forming degree and sheet thickness: 0 - 28 m/min • Power rating: 0.75 kW • Voltage: 230 Volt • Frequency: 50/60 Hz 1Ph • Net weight approx.: 100 kg • Sound level: 70 dB (A) • Dimensions: 400 mm (width); 800 mm (depth); 1,212 mm (height) Location, warranty, inspection & availability: Godpfx Acsyz Di Esweir The machine is located in 85221 Dachau/Pullhausen near Munich. The manufacturer's warranty has expired. Sale takes place with exclusion of any liability for material defects (sold as seen). The machine is as-new, fully functional, and can be inspected and tested under power by appointment. Available immediately. See the EasyFormer 12.35-3 in action in a YouTube video by the manufacturer RAS Reinhardt Maschinenbau GmbH. The video title is: "Intelligente Sickenmaschine RAS 12.35-3 | Intelligent swaging machine RAS 12.35-3 EasyFormer". On the manufacturer's YouTube channel, you can also watch various videos demonstrating the supplied roller pairs. The YouTube channel is called "RAS Reinhardt Maschinenbau GmbH".

Condition: new, plate thickness 1,25 mm roll-body distance 250 mm Gijdsyvvruopfx Acwer throat 260 mm distance between roll centers 62 mm tool adaptor 26 mm speed 6,3 m/min total power requirement 0,7 kW weight 170 kg range L-W-H 1020x600x1500 mm Domestic equipments: - motor driven beading machine - 5 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: new, plate thickness 2,5 mm roll-body distance 260 mm throat 500 mm distance between roll centers 92 mm tool adaptor 35 mm speed 3,5 m/min total power requirement 1,5 kW weight of the machine ca. 295 kg dimensions of the machine ca. 1200x700x1200 mm Domestic equipments: Gsdpfx Aeyvvq Recweir - motor driven beading machine - 3 sets of bead rollers - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: new, plate thickness 4 mm roll-body distance 260 mm throat 500 mm distance between roll centers 132 mm tool adaptor 40 mm speed 5 m/min total power requirement 2,2 kW weight of the machine ca. 350 kg dimensions of the machine ca. 1650x700x1280 mm Domestic equipments: - motor driven beading machine - 3 sets of bead rollers Gedoyvvncspfx Acwoir - Footswitch - Operating instructions in German - CE mark / Declaration of Conformity

Condition: new, Year of construction: 2026, neu 2026 090202 Mai 2026, Zwischenverkauf Türkei 3100 € 1.2 mm 100 mm 140 nm 8 Stk. 62 mm 0.75 kW Gjdpfx Ajwirx Docwsir 32 1/min 900 mm 450 mm 1350 mm 135 kg Haevy duty cast iron main frame Brake motor Foot pedal Adjustable lower roll 8 set of rolls Complete with stand User manual in ENGLISH or GERMAN

Condition: refurbished (used), functionality: fully functional, RAS 12.31 Max. sheet thickness: 1.75 mm Throat depth: 200 mm Gedpfx Acjdy Sp Rewjir Weight: 160 kg Accessories: Roller set on request (Various roller sets in stock) Condition: Refurbished

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Special price upon request Gsdpfxjxacils Acwoir Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 2.5 mm ST shaft length 250 mm roll diameter 96.0 mm throat 160 mm roll speed 6.0 + 13.0 U/min. total power requirement 1.5 kW weight 350 kg range L-W-H 1400 x 550 x 1120 mm Display machine - like new Never been used (!!) Special price upon request Gedpfx Aoxachzjcweir Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg Gisdpoxaaf Rsfx Acwer range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: new, plate thickness 2.5 mm throat 260 mm distance between roll centers 92.0 mm Giedexaaw Hjpfx Acwsr weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2752, throat depth: 315 mm, sheet thickness (max.): 2 mm, overall weight: 480 kg, Equipment: emergency stop, We offer this used Prinzing SME 80/3P beading & flanging machine, year of manufacture 2006. Manufacturer: Prinzing Model: SME 80/3P Year of manufacture: 2006 Condition: used Category ID: 1051 Type ID: 949 Machine type: beading & flanging machine Powered adjustment of the upper roller Motorized drive, single-stage, two-stage or infinitely variable Program start via foot switch PLC control All tools for rounding and beading are included Giodeyvd Ucopfx Acwjr If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, - Capacity 1.2 mm - Extension 250 mm - With 8 sets of rollers Gjdogg Nrkopfx Acwsir

Condition: new, Ostas Beading Machine KMRP 2.5 Includes 4 Tool Sets Features • Main body made of steel • Main motor with reduction gearbox • Shafts with bronze bearings • Adjustable lower shaft • Specially hardened shafts • Forward and reverse movement of the lower shaft • Movable electric foot pedal • Supplied with 4 sets of rollers Technical Specifications: Giodpjytb I Uofx Acwor • Shaft length: 250 mm • Bending capacity: 2.5 mm • Roller diameter Ø: 98 mm • Throat depth: 160 mm • Motor speed: 5 m/min • Motor: 1.5 kW • Dimensions (L-W-H): 1400 x 550 x 1120 mm • Weight: 350 kg

Condition: new, plate thickness 4 mm roll diameter 125 mm throat 200 mm total power requirement 2,2 kW weight of the machine ca. 0,48 t dimensions of the machine ca. 1,6 x 0,6 x 1,2 mm Exhibition machine, unused. • 5 speeds Gijdpfx Acsynnkfswor • Foot control • Brake motor • Emergency stop • Hydraulic roller adjustment • Special tool set

Condition: new, plate thickness 0,8 mm throat 180 mm weight of the machine ca. 22 Kg dimensions of the machine ca. 500 x 450 x 160 mm Flanging machine is equipped with: Gsdpfxjht R Hme Acwjir - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: new, Rollmak motorized beading machine BM 250 Gsdpfx Aceum Tzxewsir Including 3 tool sets Technical specifications Tool diameter Ø95 Shaft length: 260mm Bending capacity: 2.5mm Rotation: 11 m/ min. Motor: 1.1 kW Dimension L-W-H: 1550x550x1200mm Weight: 295 kg CE mark

Condition: new, Rollmak motorized beading machine BM 125 Including 9 tool sets Giedpfx Ajum T Daocwjr Technical specifications Tool diameter Ø62 Shaft length: 131mm Bending capacity: 1.25mm Rotation: 6.3 m/ min. Motor: 0.75 kW Dimension L-W-H: 970x450x1350mm Weight: 130 kg CE mark