Condition: used, Year of construction: 2023, machine/vehicle number: 1811058641, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a wire erosion machine manufactured by WEISSER, model: Univertor 8C. Gsdpfx Ajzy Ukhjmyoug TECHNICAL DETAILS Three-phase operating voltage: 400 V AC Frequency: 50 Hz Total connected load: 34 kVA Control voltage: 24 V DC Magnet voltage: 24 V DC Rated machine current: 49 A Main connection fuse: 100 A Short-circuit withstand current: 50 kA

Condition: used, Year of construction: 2016, machine/vehicle number: 179057920, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 65 A, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. Gjdpozy Ukzofx Amyoug For sale is a vertical turning lathe manufactured by WEISSER, model: Vector C-1R. TECHNICAL DETAILS Year of manufacture: 2016 Three-phase operating voltage: 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Rated current of the machine: 65 A Main connection fuse: 100 A, time-delay

Condition: used, Year of construction: 2004, machine/vehicle number: 1130.2623-31, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on site for loading. For sale is a CNC lathe manufactured by VDF Boehringer, model: NG 180-2. Gjdjzy Ukuepfx Amysug TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Type of current: AC Frequency: 50 Hz

Condition: used, Year of construction: 2009, machine/vehicle number: 181056804, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on site for loading. Gsdpfjzy Uknox Amyoug For sale is a CNC lathe manufactured by WEISSER, model: Univertor AM-T. TECHNICAL DETAILS Three-phase operating voltage: 400 V AC Frequency: 50 Hz Control voltage: 24 V DC Magnet voltage: 24 V DC Rated machine current: 99 A Main circuit breaker: 160 A, slow-blow

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 750 mm, controller model: FANUC 0i-TC, Equipment: bar feeder, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Z-axis: 750 mm Rapid traverse rate, X-axis: 20 m/min Rapid traverse rate, Z-axis: 24 m/min Spindle speed max.: 3,500 rpm Bar diameter: 75 mm Spindle motor power: approx. 15 / 18.5 kW Tool turret stations: 12 MACHINE DETAILS Control system: FANUC 0i-TC Number of axes: 2 Dimensions & Weight Dimensions (L x W x H): approx. 3,300 × 1,800 × 1,800 mm Machine weight: approx. 5,500 kg Bar feeder FEDEK DH-65L Bar length: approx. 1,500 mm Bar diameter: approx. 5–65 mm Guedozwghmspfx Amyjg EQUIPMENT Tailstock FEDEK DH-65L bar feeder Bar feeder interface

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, controller model: Hurco WinMax V11, TECHNICAL DETAILS Swinging diameter over cross slide: 402 mm Swinging diameter: 295 mm Spindle speed (max.): 3,000 rpm Travel in X-axis: 250 mm Travel in Z-axis: 750 mm Guedpfx Amjzy Ikneysg Driven tools: VDI 40 Speed of driven tools (max.): 4,000 rpm MACHINE DETAILS Control system: Hurco WinMax V11 Machine weight: 5,000 kg EQUIPMENT Renishaw tool measuring arm Internal cooling: 20 bar

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS Gedpezy Hx Djfx Amyoug ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 610 mm, turning diameter: 350 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 650 mm, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,620 mm, total length: 2,750 mm, total width: 1,535 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 24 m/min, type of input current: three-phase, overall weight: 5,000 kg, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, This machine comes from a training organization and can be seen in operation at our location! Additional options & accessories: - Measuring arm - High-pressure coolant pump - Electronic handwheel - Various 25x25 mm and drill chucks - Foot pedal - 3-jaw chuck, Ø210mm - Original Feeler + FANUC documentation. Gujdpfxozy Nc Es Amyjg Weight & dimensions: 5000 kg 2750x1535x1620 mm (LxWxH)

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 63284-0012, turning length: 650 mm, turning diameter: 300 mm, spindle motor power: 15 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, milling spindle length: 6,000 mm, type of input current: three-phase, bar passage: 65 mm, total height: 1,920 mm, total length: 3,130 mm, total width: 1,710 mm, spindle nose: A2-6, overall weight: 4,500 kg, Equipment: documentation/manual, MACHINE INFORMATION Manufacturer: Hyundai Model: KIA SKT2100SY Year: 2009 Condition: (Used) Great Serial Number: 63284-0012 Control: Fanuc Control Accessories: LNS Barfeed, Live & Static Tool holders, Swarf Conveyor, Parts Catcher, Tool Probe. Location: COVENTRY, UNITED KINGDOM Guedpjzwhp Sofx Amyjg MACHINE SPECIFICATIONS Control: Fanuc Control Bar Capacity: 65mm Chuck Size: 8″ Main, 6″ Sub Max Cutting Diameter: 300mm Max Cutting Length: 650mm Spindle Speed: 5000rpm Turret Positions: 12 Milling Speed: 6,000rpm Swing: 820mm X Axis Travel: 215mm Y Axis Travel: 110mm total (+55mm) Z Axis Travel: 680mm C Axis Travel: 0.001 degree

Condition: good (used), Year of construction: 2005, functionality: fully functional, spindle bore: 50 mm, turning diameter: 190 mm, turning diameter over bed slide: 340 mm, turning diameter over top slide: 190 mm, center height: 170 mm, center width: 700 mm, turning length: 600 mm, quill stroke: 120 mm, total length: 1,596 mm, total width: 880 mm, total height: 1,240 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, type of input current: AC, overall weight: 730 kg, Equipment: rotational speed infinitely variable, Due to restructuring measures, we are selling our conventional lathe – EMCO EM 17 D. Gedsz Aff Iopfx Amysug - Year of manufacture: 2005 - Good condition - Fully functional - Distance between centers: 700 mm / Center height: 170 mm - Max. turning diameter: 340 mm (190 mm over cross slide) - Max. turning length: 600 mm - Spindle max. 3,000 rpm – 5.3 kW - Speed infinitely adjustable (frequency control) - 4-speed gearbox – with reduction - Constant cutting speed adjustable - 3-jaw chuck 200 mm - 2+1-axis digital display - Complete machine documentation - Depending on the price, various tool holders, a 4-jaw chuck (faceplate) 200 mm, and a collet chuck device (tube and collet) can be purchased. - The machine can be inspected while powered on. - Full spare parts supply and service provided by EMCO. This offer is subject to change. Sale is subject to prior sale. No online sales. The sale is only to businesses after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pickup only (EXW) – no shipping.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,688 h, functionality: fully functional, machine/vehicle number: G3138-0826, turning diameter over cross slide: 375 mm, turning diameter: 590 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 750 mm, controller model: Fanuc 21i-T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed max.: 3,000 rpm Gujdpszza Uuefx Amyog Turning diameter over bed: 590 mm Turning diameter over slide: 375 mm Distance between centers: 750 mm Spindle bore: 78 mm Travel in X-axis: 220 mm Travel in Z-axis: 750 mm MACHINE DETAILS Control model: Fanuc 21i-T Power: 22 kW Operating hours: 1,688 h Shipping weight: 6,100 kg EQUIPMENT Three-jaw chuck Chip conveyor Turret CE marking

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Gsdpfx Ajzzq Sqjmyoug Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Gusdpfx Amsz Agzdoyjg Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Guodsz Agzqepfx Amysg Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: used, Year of construction: 2006, turning length: 1,298 mm, turning diameter: 356 mm, spindle speed (max.): 4,000 rpm, controller model: MORI SEIKI MSX 850III / MAPPS III, center width: 1,250 mm, TECHNICAL DETAILS Guedpfxszwgquj Amysg Maximum turning diameter: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swinging diameter over bed: 923 mm X-axis travel: 260 mm Z-axis travel: 1,345 mm Maximum spindle speed: 4,000 rpm Spindle bore: approx. 80 mm Number of turrets: 1 Number of tool positions: 12 MACHINE DETAILS Control system: MORI SEIKI MSX 850III / MAPPS III Dimensions & Weight Dimensions (L x W x H): 5,000 × 2,300 × 2,400 mm Machine weight: 7,600 kg EQUIPMENT IRCO SIMAG loader magazine Chip conveyor Powered tools C-axis Y-axis

Condition: used, Year of construction: 2005, turning length: 705 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 795 mm, controller model: MORI SEIKI MSX-850, TECHNICAL DETAILS Turning diameter: max. 356 mm Standard turning diameter: 275 mm Turning length: max. 705 mm Travel in X-axis: 260 mm Travel in Y-axis: ±50 mm Total travel in Y-axis: approx. 100 mm Travel in Z-axis: approx. 795 mm Rapid traverse rate X/Y/Z: 30 m/min Tool stations: 12 Gsdezwgwzjpfx Amyoug MACHINE DETAILS Design: SY with Y-axis Control system: MORI SEIKI MSX-850 Bar feed magazine: LNS Quick Load Servo 2 Bar length: max. approx. 1,500–1,600 mm / 63″ EQUIPMENT Tailstock Driven tools Y-axis LNS Quick Load Servo 2 bar feed magazine

Condition: excellent (used), Year of construction: 2023, Swing 533mm, 298mm max. machining diameter, 572mm cutting length, 3,200rpm spindle, 102mm bar capacity, 12 station turret, Y axis -/+ 51mm, 22.4kW spindle motor, HAAS control, 305mm 3 jaw chuck, tool setter, swarf conveyor, coolant, Tailstock, Gedpfx Amjzzwbxoyeug

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Guedpfx Aezwmztemyog Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , Guodpfx Aezzwgnemyjg 24 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 15,000 h, functionality: fully functional, Equipment: documentation/manual, 2021 Star SR32 JII Type A (15,000 hours) 4m FMB Turbo 3-36, Hydrajet UB20 High Pressure Coolant, LNS Swarf Conveyor, FireTrace Suppression, JBS Guide Bush System, Fully inspected & serviced, 30 Day Warranty # Star SR-32JII CNC Sliding Head Lathe Machine Hours: Approx. 15,000 hours Maximum Machining Diameter: Ø32 mm standard / Ø34 mm optional CNC Control: Fanuc 32i-B ## Machine Configuration * Twin-spindle CNC sliding head lathe * Main spindle and sub-spindle * Main and sub-spindle full C-axis control * Gang-type tooling system * Cross-working driven tooling * Back-working tooling * X1, Y1, Z1, C1, X2, Z2 and C2 controlled axes * Type B configuration additionally incorporates Y2 control on the back-working unit ## Main Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 7.5 kW continuous / 11 kW short-time rating * Maximum headstock stroke: 320 mm * Full C-axis contouring capability ## Sub-Spindle * Maximum spindle speed: 8,000 rpm * Spindle motor: 3.7 kW continuous / 5.5 kW short-time rating * Full C-axis contouring capability Gujdezuxfrepfx Amyjg * Maximum chucking diameter: Ø32 mm / Ø34 mm optional ## Main Tooling * 6 × turning tool positions * Tool size: 16 mm square * 5-spindle sleeve holder * Maximum drilling capacity: Ø13 mm * Maximum tapping capacity: M12 × P1.75 ## Cross-Working / Driven Tooling Configuration options include: * 3 × ER20 cross-milling positions + 2 cartridge-type positions * Or 6 × ER16 cross-milling positions * Maximum milling capacity: Ø10 mm * Maximum driven tapping capacity: M8 × P1.25 * Cross-milling spindle speed: 6,000 rpm * Cartridge-type driven tooling speed: up to 8,000 rpm * Driven-tool motor: 2.2 kW continuous / 3.0 kW short-time rating ## Back-Working * Maximum chucking diameter: Ø32 mm / Ø34 mm optional * Maximum front ejection length: 125 mm * Maximum projecting component length: 45 mm * Back-working tool positions: * 6 positions – Type A * 8 positions – Type B * Stationary drilling capacity: Ø13 mm * Driven drilling capacity: Ø8 mm * Stationary tapping capacity: M10 × P1.5 * Driven tapping capacity: M6 × P1.0 * Maximum back-working driven-tool speed: 6,000 rpm ## Rapid Traverse * X1 / X2 / Y1 / Z1 / Z2: 35 m/min * Y2: 24 m/min on applicable Type B machines ## Ancillary Equipment Included * 4 metre FMB Turbo 3-36 Magazine Bar Feeder * Hydrajet UB20 High-Pressure Coolant System * LNS Swarf Conveyor * FireTrace Automatic Fire Suppression System * JBS Guide Bush System ## Machine Condition & Support * Approx. 15,000 operating hours * Fully inspected and serviced * Supplied ready for production * 30 Day Warranty * Warranty valid within the UK only ## General Specification * Coolant tank capacity: 255 litres * Approximate machine dimensions: 2,690 × 1,345 × 1,780 mm * Approximate machine weight: 4,100 kg * Power requirement: 8.8 kVA * Maximum sound pressure level: 77 dB

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! Guodpfxsz Ag Ans Amyjg TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Collets Holders Additional accessories

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Gjdpfxsyh Hg Nj Amysug Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection

Condition: excellent (used), Year of construction: 2023, Capacity: Distance between spindle center and guides mm 220 Swinging diameter over bed mm 440 Swinging diameter over cross slide mm 230 Max. turning diameter over bed mm 400 Max. turning length between centers mm 1,000 / 1,500 Bed width mm 330 Headstock: Distance spindle center - bed mm 220 Spindle nose according to standard DIN 55027 Type C6 Spindle bore according to DIN 55027 mm 66 Godez Ai N Depfx Amyoug Max. spindle speed rpm 3,500 3-jaw chuck diameter mm 250 3-jaw chuck bore mm 76 Spindle motor power S1 100% / S6 40% / S6 25% kW 10 / 14 / 17 Spindle torque S1 100% / S6 40% / S6 25% Nm 159 / 224 / 272 Tailstock: Travel of quill mm 120 Quill diameter mm 65 Internal taper MT 4 Control: HEIDENHAIN TNC 620 MANUAL PLUS Accuracy: Positioning accuracy mm +/- 0.010 on 1,000 Repeatability mm 0.010 on 1,000 General information: Dimensions (without control panel): L x W x H mm 2,500 x 1,600 x 1,800 Weight kg 2,500 Max. installed power kVa 16

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Gujdpfxsyyupmo Amyeg Turning length: 750 mm Turning diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centres: 750 mm Max. bar diameter: 52 mm Spindle speed (max.): 4,000 rpm Main spindle speed range: 60 - 6,000 rpm Drive power - main spindle: 22 / 18.5 kW Max. torque: 198 Nm Counter spindle B-axis travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Number of turrets: 2 Number of tool stations: 2x 16 pos. Shank height for square tool: 20 mm Shank diameter for drills: 25 mm Turret indexing time: 0.2 s Tool holder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Fanuc drives Machine is in excellent condition

Condition: new, Year of construction: 2026, spindle bore: 51 mm, – Maximum turning diameter: 1000 mm – Turning diameter over bed: 360 mm – Turning diameter over cross slide: 230 mm – Spindle bore: 51 mm Gusdpfx Aez Altremyjg – Infinitely adjustable spindle speed – Longitudinal and transverse feed – Sino digital display for 2 axes – Cooling system – Lighting – Safety guard – Fixed steady rest – Follower rest – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400V