Section benders shaft diameter over 71mm for sale
Identified location: (US) (Edit)
|
5
angle steel/side length:80 x 80 x 8 mm
double T-iron on the x-axis:IPN 120 IPN 80 mm
U-iron on the x-axis:UPN 140 mm
speed:6 m/min
shaft diameter:80 mm
Wheel diameter:245 mm
driven bending rolls:3
flat steel:100 x 20 mm
diameter:2000 mm
flat steel:80 x 20 mm
diameter:800 mm
flat steel:30 x 10 mm
diameter:300 mm
bending capacity - flat iron:125 x 25 mm
Nl0qt
diameter:600 mm
bending capacity - flat iron:60 x 5 mm
diameter:300 mm
square bar steel:45 x 45 mm
diameter:500 mm
square bar steel:15 x 15... more
|
|
I-beam section - flat steel 220 bei Dm 1200 mm
I-beam section - upend - mm
angular steel - leg outwards 110x110x14 bei Dm 1000 mm
angular steel - leg inwards 80x80x10 bei Dm 1000 mm
flat steel flat 100 x 20 bei Dm 1000 mm
T-steel / side out 120x120x13 bei Dm 1200 mm
U-iron on the x-axis 22 bei Dm 1200 mm
B7ktizjz
pipes 102 x 6 bei Dm 900 mm
round material 75 bei Dm 700 mm
square material 60 x 60 bei Dm 600 mm
bending speed 3,5 m/min
No. - Rolls 3
Drive 7,5 kW
weight 6,4 t
dimensions of the mach... more
|
|
12
Profile bending machine
Make Shepherd
Type SPVS 90/150
Machine number 21/05188
with lots of accessories, it's not the whole attachment on the images.
Hochhalten device
380 volts
Load: 90 / 150 mm
Angle profile 150 x 150 x 16 mm
T-section 160 x 160 x 15 mm
150 x 25 mm flat material
Square material. 75 x 75 mm
Round 95 mm
Tube 140 x 6 mm
U profile 320 mm
I profile 320 mm
Shaft diameter: 1 x 160 mm and 2 x 150 mm
Bg7mthhfle
Diameter of tubes:
27 / 32 - 42 - 45 / 48-60 - 75-78 - 93-122 mm diameter f... more
|
|
1984
excellent (used)
Hydraulic delivery of the right and left bending roller with digital display
Hydraulic delivery of the right and left leadership
Right - and left-hand rotation machine can be operated vertically and horizontally
Lots of accessories
Shaft diameter: 80 mm
The Central roller diameter: 250 mm
Minimum bending diameter: 300 mm
Weight: 1600 kg
Czilwz8a more
|
|
1
new
Shaft diameter 80 mm
Roll diameter 245 mm
Delivery time approx. 6-8 weeks of order placement
Shaft diameter: 80 mm
Roll diameter: 245 mm
Driven roller: 3
Motor: 4 kW
Speed: 6 m / min.
Bending capacity (section / min. diameter): flat iron upright: 80 x 20 mm / 2000 mm; 30 x 10, 100 x 20 mm / 800 mm / 300
Lying flat iron: 125 x 25 mm / 600 mm; 60 x 5 mm / 300 mm
Quadradstahl: 45 x 45 mm / 500 mm; 15 x 15 mm / 380 mm
Round steel: Ø 50 mm / 500 mm, Ø 15 mm / 380 mm
Tube: Ø 100 x 2, 5 mm / 1200 mm; Ø... more
|
|
1
new
Shaft diameter: 140- 120roll diameter: 380
Iqgz7bz
3 driven rolls (hydromotor and planetary gear)
strong welded steel construction
lower rolls hydr. adjustable
digital read-out for lower rolls positions
plane rolls
lateral rolls (forward-backward hydraulic, rest manual)
horizontal and vertical operation
double foot pedal for- and backward drive
machine and equipment according to the CE regulations
Technical specifications:
Performances:
flat steel vertical position:120x25 mm / 1.300 mm; 50x1... more
|
|
5
tube diameter max.:120 mm
total power requirement:5,5 kW
weight of the machine ca.:1,5 t
dimensions of the machine ca.:1,62 x 1,5 x 1,3 m
Be8date8o more
|
|
2
power capacity 11 kW
shaft diameter 100 mm
roll diameter 315 mm
bending speed 5.400 mm/min
Drive power: 11 kW
Shaft diameter: 100 mm
Roll diameter: 315 mm
Bending speed 5.4 m / min
Dimensions: (WxLxH) 1.500 x 1.650 x 2.100 mm
Weight: approx. 2.240 kg
Table (see photo):
A: standard rollers
B: optional special rollers
Further information:
- Two driven bottom rollers, the upper pressure roller is based on a scale
mechanically adjustable.
- The special steel shafts are ground and hardened
- B... more
|
|
Diese Maschine ist sofort am Lager Hamburg
Listenpreis ab Werk € 27.200.-
Diese Maschine hat 10 Betriebsstunden, Leasingrückläufer!
Technische Daten:
Ggqoycwd
I - Stahl - flach 120 x 30 (d 600) mm
I-Stahl - hochkant 100 x 20 (d 2100) mm
Winkelstahl 80x80x8 (d 2000) mm
Rohdurchmesser max. 100 x 3 (d 3000) mm
Vierkantmaterial 50 x 25 x 2 (d 600) mm
Vollmaterial - Dia. 60,0 (d 1000) mm
Werkzeugaufnahme 80,0 mm
Drehzahl 4,2 m/min.
Gewicht 1.600 kg
Vcequ98b
Abmessung L-B-H 1040 x 1375 x 1540 mm
Bbh... more
|
|
15
1991
ready for operation (used)
COMAC 3055 Profile bender
- Make : COMAC ITALIA - Typ : 3055 HV - YOP : 1991 - Serial : M 1470
- Schaft Ø : 120 mm - Rol Ø : 400 mm - Bending moment : 33 cm³
- Min. bending speed : 2.5 M/Min - Max. bending speed : 7.5 M/Min - Motor power : 15 kW
- Capacity:
- Flatt 125 x 25 x Ø 1300 - Square 80 x 80 x Ø 1000 - I 240 x 106 x Ø 1500 - H 120 x 114 x Ø 2500 - Tube 139 x 5 x Ø 1300
- Length : - Width : - Hei... more
|
|
1
new
Shaft diameter: 110- 100roll diameter: 315
3 driven rolls (hydromotor and planetary gear)
strong welded steel construction
lower rolls hydr. adjustable
digital read-out for lower rolls positions
plane rolls
lateral rolls (forward-backward hydraulic, rest manual)
horizontal and vertical operation
double foot pedal for- and backward drive
machine and equipment according to the CE regulations
Technical specifications:
Performances:
Bxcub9v0
flat steel vertical position:100x25 mm / 1.500 mm; 40x1... more
|
|
5
ELEKTRISCHE PROFILBIEGEMASCHINE
HERKULES F 21 - 01-08-001
Lieferzeit: sofort
Nummer: 01-08-001
Hersteller: Herkules
Typ: F 21
MASCHINENDATEN
Baujahr: ca. 1979
L x B x H: ca. 1500 x 1000 x 1500 mm
Gewicht: ca. 400 kg
Guter Allgemeinzustand
TECHNISCHE DATEN
Steuerung: konventionell
Max. Biegeleistung (Stahl): ca. 200 x 35 mm
Max. Biegeleistung (Edelstahl): ca. 200 x 15 mm
Anzahl der Walzen: 3 Stück
Biegevorgang: Vorwärts / Rückwärts
Walzen Ø: ca. 90 mm
Abstand der Unterwalzen: ca. 150 - ... more
|
|
1
power capacity 15 kW
shaft diameter 120 mm
roll diameter 390 mm
bending speed 4.000 mm/min
Drive power: 15 kW
Shaft diameter: 120 mm
Roll diameter: 390 mm
Bending speed 4 m / min
Dimensions: (WxLxH) 1.450 x 1.985 x 2.040 mm
Weight: approx. 4.720 kg
Table (see photo):
A: standard rollers
B: optional special rollers
Further information:
- Two driven bottom rollers, the upper pressure roller is based on a scale
mechanically adjustable.
- The special steel shafts are ground and hardened
- Bot... more
|
|
11
|
|
2007
ready for operation (used)
BPR CPD 100 Profile bender
- Make : BPR Italia - Typ : CPD 100 - YOP : 2007 - Serial : 2007 / 006
- Schaft Ø : 100 - Rol Ø : 330 - Bending moment CM3 : 30
- Shaft length : 230 - Max. bending speed : 0 – 5 - Motor power : 5.5 kW
- Capacity:
- Flatt 100 x 20 x Ø 1300 - Square 60 x 60 x Ø 1000 - UPN 160 Ø 1500 - IPE 160 Ø 2500 - Tube 114 x 6,9 x Ø 1300
X3dn9rp7
- Length : 1640 - Width : 1150 - Height ... more
|
|
1
new
Shaft diameter: 80roll diameter: 245
3 motor driven rolls
strong welded steel construction
lower rolls hydr. adjustable
digital read-out for lower rolls positions on seperate control panel
lateral rolls adjustable in 3 axes
horizontal and vertical operation
for- and backward drive
machine and equipment according to the CE regulations
Technical specifications:
shaft diameter:80 mmroll diameter:245 mmdriven roll:3motor power:5 kWspeed:6 m/[...] capacities (section / min. diameter):
Njtbx
flat ... more
|
|
4
ELEKTRISCHE PROFILBIEGEMASCHINE F 15
- 01-08-002
Lieferzeit: sofort
Nummer: 01-08-002
Hersteller: Profilbiegemaschine
Typ: F 15
MASCHINENDATEN
Baujahr: ca. 1975
L x B x H: ca. 800 x 600 x 1000 mm
Gewicht: ca. 150 kg
Guter Allgemeinzustand
Maschine hat Bruch im Maschinenkörper, dieses wurde fachmännisch repariert, Maschine voll funktionsfähig
TECHNISCHE DATEN
Steuerung: konventionell
Max. Biegeleistung (Stahl): ca. 150 x 10 mm
Max. Biegeleistung (Edelstahl): ca. 150 x 5 mm
Anzahl der Walz... more
|
|
3
-Model AR360 -OUTPUT SHAFTS 360 MM
Beinpozulj
-Hydraulic Section bending machine in optimal conditions - Ready for use.
size of the three rolls 800 mm
-beam bending feature on the difficult side HEB 500 -INP 600
ANGLE 200 MM - T300 MM -FLATBAR 300X80 MM -SQUAREBAR 200 MM
PIPE/TUBE UP TO 508MM -20INCH SIZE -UNP 500 MM
weight total of the machine 60 Ton. ( dimension and pit foundation as per drawing in annex )
Configuration with the machine
-Pyramid dual pinch side rolls in... more
|
|
1
power capacity 5,5 kW
shaft diameter 80 mm
roll diameter 245 mm
bending speed 4.200 mm/min
Drive power: 5.5 kW
Shaft diameter: 80 mm
Roll diameter: 245 mm
Bending speed 4.2 m / min
Dimensions: (WxLxH) 1.350 x 1.600 x 1.850 mm
Weight: approx. 1.600 kg
Table (see photo):
A: standard rollers
B: optional special rollers
Further information:
- Two driven bottom rollers, the upper pressure roller is based on a scale
mechanically adjustable.
- The special steel shafts are ground and hardened
- B... more
|
|
good (used)
Pipe bending machine PULLMAX Z41 made in Sweden. The machine has undergone renovation of the electrical and hydraulic systems. A reducer was regenerated, new control and operator's panel were installed.
Technical data :
Pipe bender (flat) has included:
- 2 sets of rollers (for pipes - double guides and flat bars with clamps - as in the picture)
- 3 revolving rollers in both directions (rotation speed 7 RPM; Hydraulics: 1. vertical travel of the lower rollers; 2. vertical travel and from each ot... more
|
|
15
1995
ready for operation (used)
Profile bender ROUNDO R-3
Bfjck9veji
- Make : Roundo
- Typ : R 3
- Serial No. : 1985
- Age : 85 3581
- Ø shaft upper : 75 mm
- Ø shaft lower : 75 mm
- Ø rolls : 225 mm
- Max. section bending modulus : 14 cm³
- Bending speed : 0 till 5 m/min.
- Power 400 V – 4,0 kW
- Machine in top condition !
- Capaciteit.
- Angle 75 x 75 x 7 to Ø 750
- T 70 x 70 x 8 to Ø 180
- Square 45 x 45 to Ø 450
- I IPE 140 to Ø 700
- Central lubrication
- Optical readout system e... more
|
|
1
new
angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400
Bdf3amz8r8 more
|
|
6
2018
as good as new (ex-display)
bending machine model HB 80
- manufacturer KB
- two roller driven
Bd8zhzfzna
- digital readout with memory
- standard roller set knurled
- horizontal and vertikal
- main motor 4 kw
- hydraulic motor 4 kw
- shaft diameter 80 mm
- workingspeed 4,5 rpm
- bending capacity round tube 100x3,0 mm mild steel
- flat iron 100x15 mm
- solid 60 mm
- weight 1650 kg
- 400 volt 50 Hz 3 phase
HS-Code: 8462 2998 more
|
|
3
Ring bending machine CE 100... maximum bending power D. 5 "gas or D. 140 x 6 mm
available in 2 sizes!
CE 100 H3: 3 driven shafts, hydraulic delivery with progr. Delivery (8 channels) + digital display
CE 100 H3 - RLI: 3 driven shafts, hydraulic delivery with progr. Delivery (8 channels) + digital display + hydr. Leveling rollers
External control console with foot pedal control and digital display 0.1 mm of the roller position
Patented hydraulic system with accuracy 0,1 mm with hydraulic, prog... more
|
|
5
4-roller hydraulic profile bending machine
Hezinger-BendingLine, model HR4P, model HR4P090
Shaft diameter 90 mm
Ikiaghf
Roll diameter 260 mm
Motor output 5.5 kW
Maximum rolling speed 6 RPM
Machines dimensions 1,700 x 1.450 x 1,200 mm
Machines weight 2,800 kg
Bending performance HR4P080:
Flat steel upright: 30 x 10 mm with Ø 300 mm
80 x 20 mm to Ø 800 mm
100 x 10 mm to Ø 2000 mm
Flat steel flat: 60 x 5 mm with Ø 300 mm
125 x 25 mm for Ø 600 mm
Rectangle solid material: 15 x 15 mm to Ø 380 mm
45 x... more
|
|
9
Roll diameter: 350 mm
Shaft diameter: 110 mm
Bending speed: 1-5 m/min
Bending capacity: 157 WCM ³
Total power: 7,5 kW
Machine weight 2950 kg
Space requirement approx. 1500 x 1580 x 1500 mm
Bdjqfbrqdv
Facilities:
-Direct drive of all three waves
-Single delivery of the side roller
-Horizontal and vertical use
-Hydraulically movable page rectifier (via Control Panel)
-2 digital displays for the delivery rollers
-Rollers hardened
-Mobile Control Panel more
|
|
10
OSTAS RING BENDING MACHINE
TYPE OPK-85
-Shaft diameter 80 mm
-Hydraulic
-Hardened special steel shafts
-1 set of hardened rolls
-All three rolls are driven
-Two digital displays
-Horizontal and vertical work
-Manual
-400V
DUTCHMACH
Metal working machinery
ENSCHEDE - NETHERLANDS
(3 km from the German border)
Bbxv0okjf9 more
|
|
3
Profile bending roll hydraulic Sertom PP
Output shafts size 180 mm
-pre-tensioning brackets between the 3 rolls
Traction tooling to bend HEB / IPE on the hard side
-Lower rolls driven motorized
-Top roll hydraulic pinch- bending
-Top roll size 600 mm -Side rolls size 520 mm
Adjustable rolls to seat and bend the different size of profiles
-MAX. CAPACITY
-Angle 180 mm leg-in/out-
-iron bar on edge 170 mm-
-Iron bar on flat 350 mm-
T section 160 mm-
-Pipe 8,5” inch -
-Beam... more
|
|
4
Roll diameter 460
Bfgrj3omvl
Max. angle bar 140 x 15 mm
Max. T-bar IPE 300 mm
Max. U-bar 300 x 100 mm
Equipped with:
Pre-bending, hydraulic
Three roll drive
Matrixes more
|
|
3
|
|
1
2019
as good as new (ex-display)
Ring bending machine with digital display
Electric angetiebene axes
Bcsbeoqblv
Shank holder 80mm
Working speed 6 mm / sec
Motor 4kW
Weight 1800kG more
|
|
5
Technical data: 2 roll hydraulically adjustable 3 rolls driven bending force of the machine: 180 tons of roll diameter: 610 mm roll diameter side roller: 520 mm power main motor: 50 kW dimensions (length x width x height): 2500 x 2500 x 3500 mm
Yrrseg
Weight: CA. 15.5 tons more
|
|
6
Ring profile bending machine Akyapak APK 81
I-steel - upright 100 x 20 (d 2100) mm
Raw diameter max. 100 x 3 (d 3000) mm
Angular steel 80x80x8 (d 2000) mm
Square material 50 x 25 x 2 (d 600) mm
I - steel - flat 120 x 30 (d 600) max.140b mm
Solid material - diameter 60.0 (d 1000) mm
Tool holder 80.0 mm
Speed 4.2 m/min.
Weight 1,600 kg
Dimensions L-W-H 1240 x 1375 x 1540 mm
Facilities:
Hydr. Roller drive
Planetary gearbox Delivery of the 2 lower rollers
for extra small bending radii
hardened tool... more
|
|
3
Section bending machine hydraulic with working shafts vertical and horizontal
Model Comac 310 HV4
Size of shafts 150 mm
Size of rolls 475 mm
Power electric installed 30 Hp on hydraulic centralized unit
-3 rolls power driven
- lateral correctors hydraulic operated in 3 directions,
- digital readout indicators on the side rolls
-Set of rolls interchangeable 6 pieces to seat and bend the various shape of profiles as per capacity chart in enclosed
-Add-on guide rollers on correctors for ... more
|
|
6
|
|
9
For pipes in the size of the 219,1×5,0mm,
For round material Ø115mm,
D2gq70f
For square pipes 140×8,0mm and
For the carrier bending of, for example, HEB180.
Resistance moment, maximum 150-250 cc
Including set tools more
|
|
1
PRM 100 FH hydraulic ring bending machine
Art. Nr. 3812100
Hydraulic ring bending machines, horizontal and vertically can be used for profiles, pipes and solid material
heavy steel welded construction
horizontal and vertical work opportunity
all three reels driven by a hydraulic motor and planetary gear
Rollers are hardened
hydraulic delivery through two bottom rollers
lateral mechanical leveling rollers, infinitely adjustable
separate control console with foot control and 2 digital displays
... more
|
|
5
Technical data:
3 roll hydraulically adjustable 3 rolls driven bending force of the machine: 200 ton roll diameter: 610 mm roll diameter side roller: 520 mm power main motor: 60 kW dimensions (length x width x height): 2700 x 2200 x 3200 mm weight: CA. 17,5 tons
Bbccer27rc more
|
|
4
Bending machine ZOPF
ZB 140/3 H 2
- compl. with standard roller set,
- digital readout for left and right axis
- hydraulic side guides
- three smooth driven rollers
Bdnmytf2vz
- planetary movement of bending rolls
- working with both vertical and horizontal shafts
- built according to the CE rules
- bending capacity steel up to 110x25 mm
-shaft diameter 110 mm
-Rolls diameter 350 mm
-working speed 5 m/min
-installed power 7,5 kw
-weight 2950 kg
-module max Wcm3 157
-400 Volt 50 Hz. 3 ph. more
|
|
3
Technical data:
-mot 2. driven roller - MOT. Delivery of the Middle roller
-Shaft diameter 75 mm
-Shaft length approx. 200 mm
-Roller height adjustment screw without removing
-Work speed 5 + 10 m / min
-Bending performance - l and T - iron exterior at R 1200 mm 90 x 9 mm
Mdqrr
-L - iron inside the R 1200 mm 75 x 10 mm
-I 1000 mm I flat R 160 mm
-U - iron legs outward R 1000 mm U 140 mm
-U - iron thighs inward R 1200 mm U 140 mm
-Flat iron flat R 450 mm 160 x 25 mm
-Flat iron upright R 700 80 x ... more
|
|
1
Profile Bending Machine
ZOPF
- Model ZB 110/3 H
TECHNICAL SPECIFICATIONS:
- three driven shafts, smooth surface
- hydraulic adjusting of the center roller
- working position horizontal and vertical
- digital readout with memory
- shafts are supported by conical bearings
- slide bars on the slide-support are exchangeable
- shaft diameter: 80 mm
- roller diameter: 260 mm
- shaft rpm: 7 U/min
- voltage: 400V 50Hz 3Ph
- drivingmotor: 2,2 kW
- motor for hydraulic: 1,5 kW
- hydraulic pressure: 27 to.... more
|
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 160,000 inquiries per month
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
Sponsorship of Michael van Gerwen and TV advertising
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Sheet metal working
Dealer for Sheet metal working
