sheet width:3100 mm
Eef0nid
plate thickness:6,5 mm
back stop - adjustable:800 mm
Daylight opening:100 mm
bending angle max.:135 °
sheet width 3020 mm
plate thickness 4,0 mm
daylight opening 350 Oberwange mm
bending angle max. 130 °
adjustment of lower beam 80,0 Unterwange mm
adjustment range 100 Biegewange mm
work height max. 900 mm
voltage 400 V
Control
total power requirement 9,5 kW
weight of the machine ca. 4.800 kg
range L-W-H 4250 x 1600(2900) x 1980 mm
Furnishing:
- SIEMENS - PLC control model OP 7
* Bending process as a controlled, fully automatic,
or semi-automatic workflow can be pre-selected
* Bending angle...
sheet width 3000 mm
plate thickness 2,0 mm
distance between columns 3240 mm
Daylight opening 350 mm
bending angle max. 0 - 135 °
adjustment of lower beam 80 mm
power capacity 2,2 / 1,5 kW
total power requirement 3,7 kW
weight of the machine ca. 3,4 t
Bceefpna
dimensions of the machine ca. 4,3 x 1,1 x 1,6 m
Max. Bending length: 3200 mm
Max. Sheet thickness: 4 mm steel
mass: approx. 5800 kg
Motorized backgauge with folding cams up to 1500 mm Motorized folding beam adjustment Control Multibend 9000 Segmented upper beam tool with automatic tool clamping (height 150 mm)
Mwauag
Top Schwenkbiegemaschine robust gebaut noch konfigurierbar
Yse0rg
Messemaschine Euroblech 2020 Neu
sheet width:3240 mm
plate thickness:4 mm
weight of the machine ca.:12,5 t
Bt9hniatme
dimensions of the machine ca.:6,4 x 2,4 x 2,3 m
The Schröder SPB Evolution UD is a modern swivel bending machine characterized by speed, power and precision. With the up-and-down technology of the bending beam, the EVO UD 32000 allows more processing steps in less time and thus minimizes the handling effort. The SPB Evolution is sold including an extensive range of accessories. This Schröder swing bending mach...
Machine no.: 3280
working width: 3000mm
capacity at 40 kp/mm²: 4mm
opening upper beam: 350mm
Opening lower beam: 125mm
Bvqclqnkyq
opening of bending beam: 125mm
dimension (L*W*H): 4000*1000*1600mm
Machine weight: 6t
Tech. Data and dimensions errors excepted
The machine can be visited after appointment arrangement.
The machine is sold without warranty. Buyer must arrange transport and loading by appointment.
sheet width 3220 mm
plate thickness 1,50 mm
bending angle max. 180 °
stroke of upper beam 150 mm
Control POS 2000 CNC
back stop - adjustable max. 1.000 mm
work height max. 870 mm
adjustment UW 30,0 mm
voltage 400 V
total power requirement 2,75 kW
weight 2700 kg
range L-W-H 3620 x 1970 x 1255 mm
** very good condition (like new !!)
Furnishing:
- CNC motorized swivel bending machine
- with SCHRÖDER POS 2000 touchscreen control
* extensive profile catalog
* automatic cutting calculation
* Mate...
sheet width 3000 mm
plate thickness 12 mm
distance between columns 3100 mm
total power requirement 12 kW
weight of the machine ca. 15 t
dimensions of the machine ca. 4 x 2,5 x 2,7 m
Machine was complete reconditioned in 1987. Original Year of manufacture is
2s0jly
1958.
Max. Bending length: 3060 mm Max. Sheet thickness: 4 mm steel Manual backgauge up to 500 mm Manual and automatic bending mode possible Weight: approx. 4500 kg
Boluy9nwzu
Nutzlänge: 3000 mm
Max. Blechdicke: 8 mm (Festigkeit von 400 N/mm²)
Max. Biegewinkel: ca. 130 Grad
Kleinster Innenradius: 2 x Blechdicke
Kürzeste Schenkellänge: 10 x Blechdicke
Yi0do
Hub der Oberwange: ca. 300 mm
Herstellungsland: Made in Germany
Technische Änderungen vorbehalten
sheet width 3200 mm
plate thickness 6,0 mm
distance between columns -- mm
max. 500 mm
120 to
950 mm
80 °/sec.
Oberwange / beam 60 mm/sec.
10 - 1550 mm = 1,9 sec.
15 kW
9,5 t
4,68 x 3,50 x 2,10 m
Bulabj8n23
Straight bends are indispensable for perfect bending parts. A robust machine design and a powerful bending cheek resist the bending forces that occur. An intelligent crowning system and 120 tons clamping force of the upper beam ensure perfect bending quality for steel sheets up to ...
sheet width 3000 mm
plate thickness 12 mm
distance between columns 3100 mm
total power requirement 12 kW
weight of the machine ca. 15 t
dimensions of the machine ca. 4 x 2,5 x 2,7 m
Bhuljmlnyl
Machine was complete reconditioned in 1987. Original Year of manufacture is
1958.
sheet width 3240 mm
plate thickness 4,0 mm
distance between columns 3200 mm
upper clamping bar adjustment 500 mm
adjustment of lower beam 80 mm
total power requirement 7,85 kW
dimensions BxH 5227 x 2235 mm
Furnishing:
- FASTI hydraulic folding machine
- CNC FASTIMATIC model 4000
- electrical backgauge X = 3,000 mm
Ob2vj
- electr. Foot switch
- various tools
- Required instructions
Type-ZGH machines are a versatile solution for sheet metal working. They are universal for the demanding craftsman drive. To create this versatile solution for all applications up to 1.2 mm sheet steel, PPHU Prod Masz drew on its years of experience in mechanical engineering.
The ZGH offers the optimum in precision, durability and stability.
This model is equipped with a control panel.
the maximum working length 3140 mm
the max. thickness of the sheet for 1,2 mm (steel)
the weight about 2100 kil...
bending length: 2050bending angle (max.): 135stroke: 160weight approx.: 3500messurements (LxWxH): 3250/2500/2100Aluminium: 4Steel: 3Stainlesssteel: 2motor power: 3/1,5/0,4STANDARD ACCESSORIES
AC motorized drive of folding and clamping (Y,Z axis)
Servo motorized drive of back gauge (X axis)
Ballscrew spindle system with dual motor drives on clamping and folding
15.6’’ touchscreen controller on swivel arm with ERFOLD BASIC cnc line by line software
Clamping beam opening height 1...
hydraulic bending machine - in mint conditon incl.
hydraulically dynamic crowning, touchscreen,
pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping
Ss7030
sheet width 3200 mm
sheet thickness 3 mm
Top cheek stroke 300 mm
Control SYSTEM 5000
Smallest permissible bending radius 1.5 x s
Smallest permissible inner side height approx. 6 x s
Opening range of the upper beam 300 mm
Adjustment range of lower beam 80 mm
Bu8nszfyjo
Adjustment range of bending beam 80 mm
Backgauge accuracy ± 0.1 mm
Working height 900 mm
Total power requirement 4.5 kW
Machine weight approx. 4400 kg
Dimensions 4300x2220x1780 mm
Motorized swivel bending machine
Fab. Fasti Typ. 212 - 32 - 4
Very good condition, year 1996
Technical data
Make FASTI
type 212 - 32 - 4
year of construction 1996
stroke: 350mm
sheet width 3240 mm
weight: 6,3 t
Rxto0ua
dimensions: 4550 x 2600 x 2200mm
Equipment:
- Divided cutting foot set height 130mm
- controlled backgauge with ball rollers 1000mm (1500mm with repositioning)
- instruction manual
- Control FM 100
- sharpening rail 45°
- 2 pcs. Bending rails a 18mm width
- 1 pc. reinforcement rai...
sheet width 3080 mm
plate thickness 2,0 mm
distance between columns 3200 mm
bending capacity max. - angle 135 °
upper clamping bar adjustment 120 mm
weight 2.600 kg
range L-W-H 4,5x1,4x1,4 m
Furnishing:
- hydraulic folding machine
- Bending angle adjustment via electr. Potentiometer
Bk0mnlpi3j
- split upper tool
- Control panel
- electr. Button for traversing the upper and bending beam
- Double foot switch
Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz.
ZGR-2140/1.5mm (2mm Alu) + Rotary slitters 0.8mm + Welt press
the maximum working length 2140 mm
the thickness of the steel sheet up to 1.5 mm
non-ferrous metals 30% higher bending performance
bending angle: 145 degrees (on request up to 165 degrees)
cut throughout the working length
a table for supportin...
bending length: 2050bending angle (max.): 135stroke: 350weight approx.: 5950messurements (LxWxH): 3750/2300/2100Aluminium: 7Steel: 5Stainlesssteel: 3,5motor power: 2x3/2x3/0,75
STANDART ACCESSORIES
Servo drive of clamping and back gauge ( Z and X axis)
AC high torque motorized drive of folding and beam rotation ( Y and C axis)
Dnterxcsa
Ballscrew spindle system with dual motor drives on clamping and folding
15.6’’ touchscreen controller on swivel arm with ERFOLD BASIC CNC Line b...
CNC-controlled swivel bending machine with rotating upper beam
Model with rotating upper beam HF-MFA3230
bending length 3.200 mm
sheet thickness ST / VA / Alu 3,0 / 2,0 / 4,0 mm
Traversing speed Y / Z / X-axis 65 / 40 / 200 mm/s
Drive of the axes Y / Z / X 2 x 3,0 / 2 x 3,0 / 0,4 kW
machine dimensions W x L x H 2.300 x 4.750 x 2.100 mm
Machine weight approx. 8.000 kg
Basic equipment:
- 4 controlled motorized axes: X Y Z and A
- Basic control ErFold BASIC with 15,6" TouchScreen
- Rotatable upper ...
2 Used Ras cnc folders for sale models 62.30 / in stock can be viewed anytime.
2 Used Ras cnc folders for sale models 62.30 / in stock can be viewed anytime.
3metre
Standard back gauges / powered back gauges
Fpwlfd3r
Touch screen control System 5000
We are always interested in buying used cnc Ras folders
More pictures, videos and specification coming soon as the machines are currently being refurbished in our factory and having an inspection with a Ras engineer to prepare for demonstrations...
Hydraulic swivel bending machine
Fab. FASTI Typ. 215 - 32 - 4
Very good condition
Technical data
Hpply22
Make: FASTI
type: 215 - 32/4
Power: 4 mm
working length: 3240 mm
stroke: upper beam: 320 mm
stroke: bending beam: 80 mm
dimensions: L 4,55 x W 2,80 x H 2,30 m
Weight: approx. 7,5 t
equipment:
- motorized bending beam adjustment
- CNC - control FASTIMATIK 4000
- controlled back gauge 1000 mm
- documentation
- tool package:
sharpening rail 45° (built-in)
bending rail: 18mm, 35mm (buil...
sheet width 3025 mm
plate thickness 2,0 mm
distance between columns 3200 mm
Bfdovynq
adjustment of lower beam 90 mm
weight of the machine ca. 3.900 kg
range L-W-H 4000 x 1000 x 1650 mm
Furnishing:
- electrical bending angle preselection
- Replacement bending tools
- electr. Foot switch
- Required instructions
3100x1,5 mm, 2,0 mm alu, 0,8 mm VA, with foot switch, front rail 10 + 20mm, cranked sharp rail 20 degrees, radius rail, controlled backgauge, lower beam with milled holes for stop fingers, CNC-control, new control hardware
Machine will be repaired, checked and cleaned by a specialist and will be fully functional. Test run will be carried out.
backgauge: 1000 mm
Colour: blue/grey
Total power requirement: 16 A
space requirement: 3990 x 1800 x 1430 mm
machine weight: 2300 kg
without roller shear
Op...
sheet length: 3020sheet thickness: 4control: über Drehknopftotal power requirements: 5,5weight approx.: 4990
Pttgje
Schwenkbiegemaschine Fabr. Ozamech Mod. KM 4 3020 x 4 x mm.
Maschine ist in einem guten Zustand, Neuwertige Biegeschine
Abmessungen: 4245 x 700 x 1400 mm
Gewicht 4990 kg
Capacity 2 mm working length 6400 mm number of uprights 6,5 stop fingers 15/1250 mm pneumatic rear, 2-section stop for bending of 2 pieces, upper and lower apron made of HARDOX.
Fully automatic sheet metal inserting table, electric cut 2 mm, conical stop for H-folder.
DS 3000 control system.
Sgv9rovf
Used Ras Reinhardt 62.30 TURBObend Plus cnc folder for sale
We had two of these Ras folders in stock, one has sold and this is the last one left in stock available for sale.
Ras cnc sheet metal panel folder / Ras cnc electric motor driven folder for sale.
Model: 62.30 Turbo bend plus
Dptogsg
Capacity: 3metre x 2mm
Year: 2000
Back gauge: 9 powered fingers
Cnc graphic touch screen control: Series 5000
We are also interested in buying used Ras folders that are for sale or for part exchange,...
Press brake Jean-Perrot 4000x300T tons
Model: PZ 3040B - Registration no.: 4 181 973 - year: 1990
Bending length 4080mm
Bending force 300 tons
Passage between uprights 3100mm
Gooseneck 400mm
Csr0hlkq
Distance between tables 600mm
Stroke 300mm
Intermediate height 162mm
Table width 250mm
Height to the ground 900mm
Ruler length 2550mm
Speed approach 50 mm/s work 6.5 mm/s upward 50 mm/s
Motor power kW22
Overall dimensions width 1945mm Height 3050mm Approximate weight 24.000 Tonne
3050 x 12 mm
Hope : 800 mm
DNC 90 CYBELEC
LOT OF TOOLS
My32tu9b
15 tons
SOON MORE INFO
IMPORTANT: Machines are available for customers in Lithuania, Latvia and Estonia. In other markets please contact your local dealer.
Working length: 4100 mm
Folding capacity (steel): 1,25 mm
Folding capacity (stainless steel): 0,8 mm
Folding capacity (aluminum): 2,0 mm
Hfkzi9r03
Opening height: 150 mm
Advantages:
- Fast, user-friendly and reliable.
- Adjustable crowning for perfect folding results regardless of length and material thickness.
- Two folding beam rails as standard, 7/10 mm and 1...
Hydraulic swivel bending machine
Fab. FASTI Typ. 216 3200mm x 16mm
Very good condition, year 2011
Only 6800 operating hours !
Technical Data
Make: Fasti Schroeder
Type: 216 32-16
Year of construction: 2011
working length: 3200 mm
Power: 16 mm
upper beam stroke: 500 mm
bending beam adjustment: 60 mm
dimensions: approx. L 6,0 x 2,5 x 3,0 m
Weight: approx. 20 t
Bpyob2xtw7
Equipment
- Motorized bending beam adjustment
- Hydraulic upper tool clamping
- CNC controlled crowning
- CFP 120 touch screen ...
Stop: CNC 1500mm
Twe8crs
Max.sheet thickness:4 mm
working width: 3200 mm
Accessories: Whitefoot segments
CNC-swivel bending machine Hezinger-FoldingLine MFA-Servo 3040with rotatable upper beam for pointed rail and cast foot dividedwith CNC-controlled backgauge on ball roller tablewith 3D-Graik-CNC-TouchScreen control for the 5 CNC-axes bending width 3.200 mmplate thickness ST with sharpening tool (400 N/mm²) 4.0 mmplate thickness ST with gout foot (400 N/mm²) 3.0 mmplate thickness VA with sharpening tool (600 N/mm²) 2.0 mmplate thickness VA with gout foot (600 N/mm²) 1,5 mmgcontrolled upper cheek Z...
Technical data:
Gw7s0w
- max. working width 3040 mm
- max. material thickness at 40 kg / mm² strength 4,0 mm
- bending angle adjustment electronically preselectable 0 - 135 °
- with special rail 135 - 180 °
- largest opening width / stroke of the upper beam 350 mm
- Height adjustability - of the bending beam 100 mm
- of the lower beam 100 mm
- upper beam drive 400 V / 7,5 kW
- bending beam drive 400 V / 4,0 kW
- E-foot switch
- space requirement approx. W 4400 x H 1850 x D 1500 mm
...
Pressbrake
Press force: 125t
max bending length: 3660mm
max sheet thickness: 10 mm
stroke: 120mm
overalldimension: 4000x1900x2200mm
power: 10PS
Guutd7r
weight: 8,4 t
IMPORTANT: Machines are available for customers in Lithuania, Latvia and Estonia. In other markets please contact your local dealer.
Working length: 3100 mm
Folding capacity (steel): 6,0 mm
Folding capacity (stainless steel): 3,8 mm
Folding capacity (aluminum): 9,0 mm
Clamping beam: 350 mm
Configuration:
- Control System ProLink control with 18.5″ touch screen and graphic programming
- Automatic crowning of folding beam rail
- Frequency/servo driven motors for both clamping and folding bea...
The revolutionary and patented bending system enables bending freedom never seen before. Bends up to 300° (150° “up and down”), which are a problem with other long-folding machines, are considered standard on the EVOBEND.
= OUR PATENTED BENDING PRINCIPLE =
Almost scratch-free bending of EVOBEND provides the aesthetic surplus value. Until now, the bending beams have bent the sheets by means of swivel movements. However, this movement has permanently damaged the sheet metal profiles. The “rubbing...
working width: 3200 mm
Colour: grey
Year of construction: 1999
max.sheet thickness: 2,5 mm
stop depth: 1550 mm
Suf3xs
Accessories: New upper beam tool (pointed rail), bending rail 15mm, two-man operation, cast foot rail available on request
Condition: generally overhauled (bending beam guide repaired, gear drive renewed, control new)
Technical data:
- max. working width 3040 mm
- max. material thickness at 40 kg / mm² strength 4 mm
- Bending angle adjustment electronically preselectable
- automatic sequence control for a complete work sequence
- highest working setting of the upper beam 250 mm
- largest opening width / stroke of the upper beam 350 mm
- height adjustability - of the bending beam 30 mm
Bh7j803c8i
- of the lower beam 100 mm
- Upper beam drive 400 V / 1.5 kW
- Bending beam drive 400 V / 5,5 kW
- Acce...
IMPORTANT: Machines are available for customers in Lithuania, Latvia and Estonia. In other markets please contact your local dealer.
Working length: 3100 mm
Folding capacity (steel): 3,0 mm
Folding capacity (stainless steel): 1,9 mm
Folding capacity (aluminum): 4,5 mm
Clamping beam: 195 mm
Bue9t2i9sh
Configuration:
- Control System ProLink W control, with 18.5″ touch screen and graphic programming
- Automatic adjustment of sheet thickness 0-4.0 mm manually 4-20 mm.
- Adjustable crowning o...
Technical data:
- max. working width 3020 mm
- max. material thickness at 40 kg / mm² strength 2,5 mm
- bending angle adjustment electronically preselectable 0 - 135 °
- with special rail 135 - 180
- largest opening width / stroke of the upper beam 250 mm
- height adjustability - of the bending beam 50 mm
- of the lower beam 50 mm
- upper beam drive approx. 400 V / 1,5 kW
- bending beam drive approx. 400 V / 3 kW
Cpwptlwia
- Accessories - control POS 800
- divided goat's foot bending...
IMPORTANT: Machines are available for customers in Lithuania, Latvia and Estonia. In other markets please contact your local dealer.
Working length: 3100 mm
Folding capacity (steel): 4,0 mm
Folding capacity (stainless steel): 2,5 mm
Folding capacity (aluminum): 6,0 mm
Clamping beam: 200 mm
Configuration:
- Combi beam equipped with quick change box tooling
- ProLink W control, with 18.5″ touch screen and graphic programming
- Multifold System – Segmented lower and folding beam tooling
- AG...
IMPORTANT: Machines are available for customers in Lithuania, Latvia and Estonia. In other markets please contact your local dealer.
Working length: 3200 mm
Folding capacity (steel): 2,0 mm
Folding capacity (stainless steel): 1,2 mm
Folding capacity (aluminum): 3,0 mm
Opening height: 150 mm
Advantages:
- Crowning adjustment as standard gives the perfect folding result
- Two folding beam rails - 7/10 mm and 20 mm
- Fast, reliable, and user-friendly
- Multiple backgauge stops for both small...
IMPORTANT: Machines are available for customers in Lithuania, Latvia and Estonia. In other markets please contact your local dealer.
Working length: 3200 mm
Folding capacity (steel): 1,5 mm
Folding capacity (stainless steel): 0,9 mm
Folding capacity (aluminum): 2,2 mm
Opening height: 150 mm
Dx7coa
Advantages:
- Fast, user-friendly and reliable.
- Adjustable crowning for perfect folding results regardless of length and material thickness.
- Two folding beam rails as standard, 7/10 mm and 15 mm...
Used Folding machines (motor-driven) 3000-3999mm
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Photo gallery: The World's 10 biggest excavators
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
Sell now on Machineseeker! Over 220,000 inquiries per month
