Used Gkt 60 for sale (21,667)

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 600 mm, machine/vehicle number: 3002097/2, TECHNICAL DETAILS Temperature range: Ambient temperature to -110 °C Design: Stainless steel mesh belt Belt length: 4,000 mm Belt width: 600 mm MACHINE DETAILS Power supply: 3-phase EQUIPMENT Stainless steel mesh belt Continuous conveyor belt system Nwedpfoz I Ti Asx Akion Suitable for integration into continuous hardening systems

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Vertical top-drive saw FOD GKT 60 F with feeders and collection Machine in good technical condition after bearing replacement and service. New installation and electrical box Basic technical data: Horizontal clearance mm 600 Nwodpfxjwp Dqrj Akijn Saw frame stroke mm approx. 400 Clearance between rollers mm 60-550 Smallest diameter of sawn logs mm 100 Largest diameter of sawn logs mm 500 Smallest length of sawn logs mm 2200 Main shaft rotation speed rpm 280 Feed per 1 revolution of the main shaft mm/1 rev. 5 - 20 Maximum number of saws pcs. 12 Main motor power kW 30 Feed motor power kW 2.2 Hydraulic unit motor power kW 2.2

Condition: used, machine/vehicle number: 516305X00392, Year of construction: 2020, operating hours: 9,411 h, load capacity: 3,000 kg, lifting height: 4,150 mm, mast type: duplex, fork length: 2,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,150 mm Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex mast Free-lift mast: Without center hydraulic cylinder Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery voltage in idle state: 87.5 V Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Dead weight: 5,100 kg Service valid until: 04/2027 UVV certificate valid until: 04/2027 Operating hours: 9,411 h EQUIPMENT Fork positioner with side shifter Semi-cab with windshield wiper Lateral fall protection, detachable LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat with lumbar support Previously a Still full-service unit 3rd and 4th valve Fork adjustment: Hydraulically adjustable Side shifter All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Nwodpfx Akoz Nv A Ajion Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible for a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receiving confirmation of payment by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 122

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. Nedpez Rnwhefx Akijwn The new price was EUR 38,000.

Condition: ready for operation (used), Year of construction: 2012, Are you looking for a solution for efficient and environmentally conscious operations? Then a waste compactor is the solution to your waste problem! These powerful and reliable waste compactors are suitable for compressing various materials such as cardboard, plastic, textiles, and other materials. The machines process the waste into bales. Ideal for companies that want to save space and recycle. Nwjdo Adrtrjpfx Akion Specifications Brand: DIXI Type: 60 SD Year of manufacture: 2012 Pressing force: 60t Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Feed opening dimensions: 115 cm x 80 cm deep x 55 cm high Video available upon request Transport available upon request

Condition: used, Year of construction: 1998, machine/vehicle number: 844, functionality: fully functional, pressing force: 61 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 640 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,000 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN August Luigart & Sohn GmbH & Co. KG with a maximum pressing force of 61 tons. The machine has a table size of 1,700 × 1,200 mm, a maximum installation height of 1,350 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, and assembly operations in industrial applications. ##### Technical Data + Information: Hydraulic 4-column stamping press – 61 T – 1,700 × 1,200 mm ==== General Information - Manufacturer: ALN August Luigart & Sohn GmbH & Co. KG - Type: Oil-hydraulic 4-column stamping press - Model: 4 SPy 60 SO - Machine number: 844 - Year of manufacture: 1998 - Pressing force: 61 T - Rated force: 600 kN - Table size (working area): 1,700 × 1,200 mm - Ram plate size: 1,700 × 1,200 mm - Table height: 640 mm - Open height: 1,450 mm - Installation height: 1,350 mm - Stroke: 1,000 mm - Front opening: 1,700 mm - Side opening: 850 mm - Installation width front/rear: 1,700 mm - Installation width side: 850 mm - Tool upper part weight max.: 1,200 kg - Total height: 3,992 mm - Total width: 2,645 mm - Total depth: 1,965 mm - Total weight: 12 T - Basement required: no ==== Hydraulic cylinder - Number of cylinders: 1 - Cylinder diameter: Ø 180 mm - Piston rod diameter: Ø 160 mm - Guide column diameter: Ø 125 mm - Stroke: 1,000 mm - Max. working pressure: 236 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s - Setup speed: 10 mm/s ==== Hydraulics & Drive - Main motor: 25 kW - Oil tank: 650 l - Oil type: HLP ISO VG 46 - Oil filter fineness: < 25 µm - Operating temperature max.: 60 °C Nwodpfx Ake Adrzcjisn - Pneumatic pressure accumulator: yes ==== Tooling - T-slots: 5 - T-slots according to DIN 650 / T22 M20 ==== Control System - Control: SIEMENS SIMATIC Touch Panel - Control panel: on the frame - Two-hand operation - Valve voltage: 24 V DC - Control voltage: 230 V AC ==== Safety - Stroke end damping - Follow-up stroke: 26 mm - Follow-up time: 113 ms - Safety distance: 228 mm - Emergency stop - Light curtain / light barrier - Protective grid - Separate control cabinet - Maintenance platform: no ==== Electrical Connection - Operating voltage: 415 V - Frequency: 50 Hz - Power supply: 3PEN - Connection cable: 16 mm² - Fuse: 63 A - Main motor current consumption: 48 A - Noise level: < 70 dB(A) ##### Application areas: Stamping, forming, straightening, press-fitting, assembly operations, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic stamping press, 4-column stamping press, oil-hydraulic stamping press, hydraulic press, hydraulic press, ALN press, August Luigart press, 4 SPy 60 SO, 61 T press, 61-ton press, forming press, stamping press, straightening press, assembly press, industrial press)

Condition: used, Year of construction: 2022, functionality: fully functional, For sale, starting from our location in 45888 Gelsenkirchen, are two Inject Star P-60 residual meat recovery systems, including bone crushers and accessories. Nedpfez Iz Tcsx Akiown These systems are used, manufactured in 2019 and 2022, and come from a business liquidation. Currently, both systems are still operational and can be inspected on-site by appointment. Disassembly, loading, and transport are the responsibility of the buyer.

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Nwodpfxez Tiwhs Akion Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Nwsdpsz Ix Uksfx Akijn Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 Nedsz Hq Akepfx Akiswn - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: Nsdpfxo Aa Irpo Akiewn CNC vertical machining center, Quaser Type MK 60 II Year of manufacture: 2000 CNC control: Fanuc 18 M Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Internal cooling system Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.

Condition: good (used), Year of construction: 2015, pressure 60.0 t punching cross-cut in cmm 28 in 15 / 38 in 11 mm square edge steel 35 x 35 mm L-beam 120 x 120 x 12 mm round bar steel 40.0 mm Nweds Aa A Ifopfx Akijn flat steel 200 x 20 / 300 x 15 mm blade length 317 mm throat 220 mm work height max. 940 / 1140 mm strokes per minute max. 26 work stroke max. 55.0 mm oil volume 23.0 ltr. total power requirement 4.0 kW weight of the machine ca. 1440 kg Dimensions (HxWxD) 1510 x 590 x 1570 mm From a maintenance workshop Original price of base machine ~ 14.000 euros Special price upon request Features: - Robust electro-hydraulic structural steel shear - Punching station, flat steel shear, . angle/profile steel shears, notching station - heavy-duty and stable welded construction - infinitely variable stroke adjustment - very compact design - support table at notching and punching stations - side support tables - 1x freely movable control panel - Emergency stop button - Operating instructions (PDF)

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm Nodpfxou Hautj Akiewn bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: used, overall weight: 40,000 kg, No. 3282 Float and laminated glass cutting line Lisec ESL-60/30RS / VB-33 Used, year of construction 2009 / 2016, line still in operation, expected to be available from 15.02.2027 According to our customer / the previous owner, the line is fully functional and can be inspected on site Scope of delivery Only the areas framed in yellow in the layout Laminated glass cutting items 1 - 8, float glass cutting items 9 - 22 Nwodpfo Af Aqwjx Akijn Item numbers as marked on the photos Key technical data Designed for jumbo size 6000 x 3210 mm Float glass cutting up to max. 33 kg/m2 glass weight, corresponds to approx. 13 mm glass thickness Laminated glass cutting up to max. 43 kg/m2 glass weight, corresponds to approx. 17 mm glass thickness 2 laminated glass cutting bridges Lisec VB-33 for higher output Automatic cutting table with grinding unit for edge deletion (Low-E) Automatic breaking in X and Y direction Conveyor sections up to max. 50 kg/m2 Power supply 3/N/PE 400 V / 50 Hz, control voltage 24 V Compressed air 6 - 8 bar Total of the stated connected loads approx. 210 kVA Laminated glass cutting Item 1: Laminated glass cutting machine Lisec PTV-60/30RE, year of construction 2009, approx. 5640 kg Item 2: Assembly Lisec VZ Line 2 Item 3: Air cushion table Lisec LKT-45/45TS, year of construction 2009, 61.28 kVA, approx. 3200 kg Item 4: Laminated glass cutting bridge Lisec VB-33, year of construction 2009, 17.00 kVA, approx. 2200 kg Item 5: Film overhang removal Lisec FASV-33, year of construction 2016, 0.83 kVA Item 6: Laminated glass cutting bridge Lisec VB-33, year of construction 2016, max. 43 kg/m2, 18.83 kVA, approx. 2200 kg Item 7: Stop and positioning station Lisec AL-32/33N, year of construction 2016, 25.88 kVA, approx. 1830 kg Item 8: Belt conveyor section Lisec BTA-20/26, year of construction 2016, max. 50 kg/m2, 6.08 kVA, approx. 1020 kg Float glass cutting Item 9: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 6.08 kVA, approx. 1020 kg Item 10: Belt conveyor section Lisec BTA-40/26 Item 11: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 9.05 kVA, approx. 1020 kg Item 12: Manual breaking table Lisec BTS-37/33, year of construction 2016, 15.75 kVA, approx. 1543 kg Item 13: Air cushion table Lisec LKT-10/33, year of construction 2016, max. 33 kg/m2, 4.50 kVA, approx. 250 kg Item 14: Belt conveyor section Lisec BTA-40/26, year of construction 2009, max. 50 kg/m2, 2.30 kVA, approx. 1154 kg Item 15: Breaking unit Lisec TBY-26/12, year of construction 2009, approx. 255 kg Item 16: Conveyor section Lisec RWF-33/25, year of construction 2009, 4.59 kVA, approx. 975 kg Item 17: Belt conveyor section Lisec BTA-30/33, year of construction 2009, 2.30 kVA, approx. 980 kg Item 18: Assembly Lisec RBA-25, year of construction 2009, 1.46 kVA, approx. 820 kg Item 19: Breaking unit Lisec TBX-33/12, year of construction 2009, approx. 290 kg Item 20: Belt conveyor section Lisec BTA-60/33, year of construction 2009, 18.22 kVA, approx. 1560 kg Item 21: Automatic breaking station Lisec ARS-33, year of construction 2009, approx. 580 kg Item 22: Automatic cutting table Lisec ESL-60/30RS, year of construction 2009, max. 33 kg/m2, 14.90 kVA, approx. 6380 kg Total weight approx. 40000 kg Sale on behalf of customer, ex location near 97076 Würzburg, without dismantling, transport and assembly On-site inspection is possible and recommended Any warranty is excluded, sold as seen / as is

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, total length: 8,200 mm, total width: 3,800 mm, overall weight: 5,250 kg, Tiltable automatic float glass cutting table for jumbo sizes : 6000 x 3210 mm min. glass size : 350 x 180 mm Nwsdpfx Akjz N Dqusisn glass thikness : 2,3 - 19 mm This table has NO option for low e deletion

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10960000423, For sale is a CNC universal milling machine, type Deckel Maho DMU 60T, manufactured in 1999. This machine stands out due to its robust design (cross slide) and is ideal for toolmaking, prototype production, training, or as a versatile workhorse in the workshop. The machine is in good condition and can be inspected while powered on after prior arrangement. Equipment: - Rigid T-slot table - Precision vise - Control panel with Heidenhain control Nwjdpfxs Ad Apqj Akijn Accessories: - Workbench (4 drawers, 1 door) with attached bench vise - Stool - Tool clamping devices Attractive offer – flexible & worry-free We offer not only a high-quality product but also customized financing options that can be tailored to your needs. Whether it's a down payment, installment payments, or individual financing models, we will work together to find the right solution. Upon request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes and errors!

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 8,805 h, load capacity: 4,000 kg, lifting height: 4,450 mm, fuel type: electric, mast type: other, battery capacity: 870 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 2,400 mm, tire condition: 90 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), total height: 3,150 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following technical specifications: Lifting capacity: 4,000 kg Lifting height: 4,450 mm Overall height: 3,150 mm Year of manufacture: 2010 Operating hours: 8,805 Still 4.0-ton electric forklift with a full cabin and heating, battery at 78%, good tires (rear tires new), standard free-lift mast, side shifter, 4th hydraulic valve, single-pedal operation, four-link mechanical system, pre-equipment according to StVZO (German Road Traffic Licensing Regulations), fork length 2,400 mm (other lengths possible), charger. Additional attachments such as fork positioners, rotators, extension forks, etc., as well as other fork lengths, are available upon request. Nsdpe Adnzfefx Akiswn Price ex works, including 1,000 hours of service according to STILL manufacturer's specifications and a valid FEM (UVV) inspection upon sale. Inspection, demonstration, and test drives are available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively with our own ramp-equipped low-bed trailer (transport costs upon request). Further information about us and other offers can be found on our newly designed website!

Condition: excellent (used), Equipment: foot remote control, Capacities: Force: 60 tons Punching: Ø28 x 15 mm Ø38 x 11 mm Shearing of flat material: 200 x 20 mm 300 x 15 mm Angle iron: 120 x 120 x 12 mm Solid material: Ø 40 mm 35 x 35 mm Nedpfxe Adrcye Akiown Length stop is included with the machine.

Condition: used, functionality: fully functional, Year of construction: 2014, LANG Eco Tower 60 with Eco Feed and extensive clamping system package for sale For sale is a LANG Technik automation system consisting of an Eco Tower 60 and an Eco Feed, manufactured in 2014. The system was used productively until recently and has already been professionally dismantled. Ideal for automating CNC machining centers and increasing machine uptime. Scope of delivery: 1 × LANG Eco Feed loading system, manufactured in 2014 1 × LANG Eco Tower 60 loading tower, manufactured in 2014 40 × LANG Eco-Grip vices, 77 mm, steel base 20 × LANG Eco-Grip vices, 77 mm, aluminum base 1 × Vice carriage 1 × LANG Quick-Point clamping tower 1 × Pneumatic interface between handling system and clamping tower 1 × Operating manual 1 × Installation manual Condition The system operated flawlessly in production until it was dismantled. An inspection is possible after prior arrangement. Transport Pick-up only Loading and transport must be arranged by the buyer. Terms of sale Sale exclusively to commercial businesses and entrepreneurs No sale to private individuals Nwodpfx Ajz Nxdpokion Sale subject to exclusion of liability for material defects No guarantee or warranty on condition Inspection possible after arrangement Price Price is net plus applicable VAT VAT will be shown on the invoice. If you are interested, have any questions, or would like to arrange an inspection, please do not hesitate to contact us.

Condition: used, Year of construction: 2003, operating hours: 39,000 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ARBURG Typ: 420C1300-350-60 Baujahr: 2003 Schließkraft: 130 Tonnen Holmabstand 420 x 420 mm Schnecken DN 1: 35 mm Spritzteilgewicht in PS: 127 g Schnecke DN 2: 25 mm Spritzteilgewicht in PS: 45 g Steuerung: Selogica Nedpfx Aey Snapjkiewn Ausstattung: .Kernzug -Roboter

Condition: good (used), Year of construction: 2009, functionality: fully functional, pressing force: 61 t, filling opening width: 1,420 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, total width: 2,085 mm, total length: 8,740 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 18,000 kg, pressure: 280 bar, oil tank capacity: 800 l, power: 22 kW (29.91 HP), Used Baseline 60 for sale. The machine underwent its last maintenance in March 2026, and nothing unusual was found. The machine is fully functional and has now been taken out of production. The machine is in good condition. Technical specifications: Nodpfxjzlnb Dj Akiswn Year of construction: 2009 Main pump drive: 22 kW Needle drive: 4 kW Filter pump: 2.2 kW Oil cooler: 1.5 kW Working pressure: 280 bar Oil tank capacity: 800 L Pressing force: 61 tons Specific pressing pressure: 7.7 kg/cm2 Pressing stroke: 2000 mm Dimensions of pressing channel: 1100 x 720 mm Volume of pressing chamber: 1.6 m3 Bale length (adjustable): 1300 mm Bale weight (approximate): up to approximately 500 kg Number of binding wires: 5 vertical Dimensions of filling chute: 1420 x 972 mm Weight of press: approximately 18 tons Noise level: < 85 dB(A) Average cycle time: 19.2 sec Capacity (depending on the material, material feed, and bale weight): 30 kg/m3: 6.9 tons/hour 60 kg/m3: 12.8 tons/hour 100 kg/m3: 19.2 tons/hour 150 kg/m3: 25.8 tons/hour

Condition: ready for operation (used), Specifications of NEUE Herbold SB 60/145 S7-3 Motor Power: 70kw Feed Opening: (approximately 620 mm x 565 mm) Rotor Configuration: 5-knife open rotor staggered Bed Knives: 2 Installed Screen: 3/16" (approximately 4.76 mm) Additional Equipment: Control panel with soft-start feature Voltage: 460V / 3-phase / 60 Hz Nodpfsw R Un Ajx Akiewn Extras: Includes seven extra screens We supply a wide range of granulators designed for plastics recycling, manufacturing, and waste reduction. Whether you need compact units for light-duty use or heavy-duty machines for high-output production, we have the right solution.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C1400394, Double miter saw, Fom Industrie BLITZ 60, 6.6 m, year of manufacture 2026. Equipped with a second and third intermediate profile support (pneumatically retractable), automatic profile height gauge with mobile sensor and vertical clamp, pneumatic lift roller on the loading side, central conveyor belt for chip removal, chip conveyor belt with inclined end (6.6 m version), software license for cutting with special dimensions and at variable angles, and label printer. Nwedpfx Akez Ngh Nsisn

Condition: used, machine/vehicle number: 008739, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Nsdpfx Asz N Swiokijwn Total number of drilling spindles: 16 Total number of tool changer positions: 14

Condition: used, Year of construction: 2013, number of controlled axis 6 STK workpiece weight 60 kg throat 820 mm weight of the machine ca. 0,665 t dimensions of the machine ca. 30 m³ The KR 60-3 industrial robot is a front-runner in its class thanks to its high flexibility and long reach with optimum load capacity. KUKA robot type: KR 60-3 Installation position: Floor Number of axes: 6 Maximum load of the robot: 60 kg Maximum reach: 2230 mm Repeatability: ± 0.06 mm Control system: KR C4 Weight approx. 665 kg Robot movement speed Axis 1: 128 °/s Axis 2: 102 °/s Axis 3: 128 °/s Axis 4: 260 °/s Axis 5: 245 °/s Axis 6: 322 °/s Axis range (in º) Axis 1: ±185 ° Axis 2: -135 ° / 35 ° Nodpfx Ajzupmgjkiswn Axis 3: -120 ° / 158 ° Axis 4: ±350 ° Axis 5: ±119 ° Axis 6: ±350 °