Condition: good (used), Year of construction: 1989, Lathe, made by MAGDEBURG, type CNC 602, Year of manufacture: 1989 Technical specifications: Lsdpfx Aaowbu Aiocjah Diameter (max.): 400 mm Drive power: 60 kW Weight, approx.: 5.5 tons Control system: Siemens Sinumatik Cross travel, approx.: 300 mm Longitudinal travel, approx.: 280 mm

Condition: used, Brand: CMZ Model: TBI-480 Control: FANUC OT Maximum admissible diameter: 480 mm Maximum turning diameter: 350 mm Main spindle nose: 8 JIS A-2/ASA Maximum X-axis travel: 200 mm Maximum Z-axis travel: 590 mm Rapid traverse Z/X axis: 15/20 m/min Number of tools: 12 Ledpfx Aaexqmw Ijcsah Chuck diameter: 250 mm Maximum tailstock body travel: 500 mm Maximum tailstock quill travel: 130 mm

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. Lajdpfxsuwc T He Aacoh NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: excellent (used), functionality: fully functional, Make: Colchester Type / Model: Student Tip width: 500 mm aperture: 42 mm Center height: 175 mm Turning diameter over bed: 350 mm over slide: 200 mm Speed range: 34 to 1,500 mm Lajdpfx Aju T Iwyoacsh Longitudinal feed: flat: 0.04 to 0.25 mm/rev Connection: 1.1 / 2.2 kW Accessories: steel holder, 3-jaw chuck, 4-jaw chuck, steel holder Weight: approx. 800 kg Dimensions: 1,550 x 900 x 1,200 mm

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Year 2005 CF03E30096 Ljdpfx Aaeuwn Dkscoah Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 mm Distance Between Centres - 645 mm Max. Turning Diameter - 260 mm Max. Turning Length - 530 mm Bar Capacity - 52 mm X Axis Stroke - 180 mm Z Axis Stroke - 530 mm Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 Rpm Driven Tool Motor - 1.1/3.7 kW Tailstock Travel - 435 mm Tailstock Quill Travel - 100 mm Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 kW Floor Space - 2360 X 1745 mm Machine Weight - 4300 Kgs Electrics - 415 V, 3 Ph, 50 Hz

Condition: good (used), 2 pieces branded turret automatic lathes, make Index, type OR with many accessories Lsdjium Ugjpfx Aacsah Specification: Largest diameter 12 mm Number of spindles 6 Number of spindle speeds 10 pieces Minimum spindle speed 950 1/min Maximum spindle rotation speed 7500 1/min Weight of the machine 1 t (for further data see type plate)

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Year 2005 CF03E30096 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 mm Distance Between Centres - 645 mm Max. Turning Diameter - 260 mm Max. Turning Length - 530 mm Bar Capacity - 52 mm X Axis Stroke - 180 mm Z Axis Stroke - 530 mm Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 Rpm Driven Tool Motor - 1.1/3.7 kW Tailstock Travel - 435 mm Tailstock Quill Travel - 100 mm Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 kW Floor Space - 2360 X 1745 mm Lsdpfet N Sitsx Aacsah Machine Weight - 4300 Kgs Electrics - 415 V, 3 Ph, 50 Hz

Condition: good (used), CNC automatic lathe, Ergomat, type TB 60 Ledpeu Ix Afefx Aacsah year 1998

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Serial number CF02E30091 Year 2005 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 MM Distance Between Centres - 645 MM Max. Turning Diameter - 260 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM Ledpouwdg Ujfx Aacsah X Axis Stroke - 180 MM Z Axis Stroke - 530 MM Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 RPM Driven Tool Motor - 1.1/3.7 KW Tailstock Travel - 435 MM Tailstock Quill Travel - 100 MM Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 KW Floor Space - 2360 X 1745 MM Machine Weight - 4300 KGS

Condition: good (used), Centre height: 175 mm Distance between centres: 800 mm Swing diameter over bed: 350 mm Swing diameter over cross-slide: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital readout Lodpfexc Ewwex Aacjah

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Serial number CF02E30091 Year 2005 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill Lasdjt Dzz Ijpfx Aacsh 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 MM Distance Between Centres - 645 MM Max. Turning Diameter - 260 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM X Axis Stroke - 180 MM Z Axis Stroke - 530 MM Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 RPM Driven Tool Motor - 1.1/3.7 KW Tailstock Travel - 435 MM Tailstock Quill Travel - 100 MM Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 KW Floor Space - 2360 X 1745 MM Machine Weight - 4300 KGS

Condition: good (used), Traub, TNC 42/65 DGY, year 1996 Model TX8F turning length 450 mm Main drive Spindle speed range 4000 Spindle motor power 18.5 KW Lasdpfx Asrgq Dvsaceh Weight 4,725 kg Accessories: chip conveyor, bar loader LNS Hydrobar and optical tool measurement

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, USED Taiwan Takisawa model EX-108 high performance 2-Axis CNC lathe. Serial Number CA11E80453 Year 2000. NOTE THIS IS A 2 AXIS MODEL EX108 NOT A 3 AXIS EX308. • Heavy Cast Iron Slant Bed Construction • Fanuc 21iT CNC Control • 4-Track Heavy Duty Linear Guideways • High Speed Servo Turret • Tool Setting Device • 8” 3-Jaw Hollow Spindle Hydraulic Chuck • Parts Counter • Toolholders included Max. Swing Over Bed - 400 MM Max. Swing Over Cross Slide - 320 MM Distance Between Centres - 645 MM Standard Turning Diameter - 216 MM Max. Turning Diameter - 320 MM Lajdpfx Aaet E Hvgocsh Max. Turning Length - 530 MM Bar Capacity - 52 MM X-Axis Stroke - 180 MM Z-Axis Stroke - 530 MM Spindle Speeds - 60 – 4000 RPM Spindle Nose - A2 – 6 Spindle Bore - 63 MM Turret Type - 12 Station Tailstock Stroke - 435 MM Tailstock Quill Stroke - 100 MM Tailstock Quill Taper - 5 MT Rapid Traverse (X & Z) - 20 & 24 M/Min Jog Feed Rate (X & Z) - 0 – 1260 MM/Min Spindle Motor - 7.5 / 11 KW Electrics - 415V,3PH,50HZ Floor Space - 2240 MM X 1645MM Machine Weight - 4300 KGS

Condition: good (used), Year of construction: 1995, Traub, TNC 42/65 DGY, year 1995 Model TX8F turning length 450 mm Main drive Spindle speed range 4000 Spindle motor power 18.5 KW Weight 4,725 kg General overhaul in 2015 Laedpfx Aasrgq Ezecsh Accessories: chip conveyor, bar loader LNS Quick Load

Condition: good (used), Year of construction: 1967, Technical data: Centre height: 140 mm Turning length: 500 mm Accessories (included): Steady rest Multifix 'A' Collets 0.5 – 24 mm Milling attachment (Y axis) 3-jaw chuck 125 mm Faceplate 260 mm Live centre Drill chuck Die holder 4-jaw chuck Coolant pump Operating manual (German) Ljdpfx Asxlr Hkeacoah

Condition: good (used), various quills / center punches in sizes MK3 - MK6 (different manufacturers) rotating and fixed quills Lodpfx Aajipibxscoah

Condition: good (used), We have some Multifix steel holders, size D1D in various designs in stock. Ledpfx Aaekyugwjcjah Partly also with drill and turning steels. Exact data and requests please inquire. Gladly also in larger quantities.

Condition: new, 1 new centre punch size MK 6 (Other sizes available in stock) Ledpfxegwt Uke Aacsah

Condition: good (used), different sets for a F 200 3 jaws chuck Lsdpfshmkfxox Aacoah (base jaws on top jaws in each case)

Condition: good (used), used copying unit Copymat, type 1301A2 Lajdpfx Aaoipibqscjh

Condition: good (used), div. face plates from 400 mm - 800 mm Laedpfsipidhex Aacoh

Condition: used, We have some Multifix steel holders, size D1D in various designs in stock. Laodpsk E Nthofx Aaceh Partly also with drill and turning steels. Exact data and requests please inquire. Gladly also in larger quantities.

Year of construction: 1984, condition: good (used), Güdel G100 CNC with new Siemens control system working range - max. circulation Ø:260 [mm] - max. machining Ø:120 [mm] - traversing of the longitudinal slide:200 [mm] Ledpfx Aasf Tpcxjceah - traverse of the facing slide:120 [mm] Main spindle - spindle nose:A4 DIN 55021 - spindle bore for collets:type F38 - Power chuck Ø:165 [mm] - Bar passage Ø:32 [mm] - Speed range:50 - 60 000 [rpm] Main drive - DC motor:7 [kW] Feed drives (DC motors) - feed speed:0,01 - 6 000 [mm/min] - rapid traverse rate:6 [m/min] Tool carrier - 8-sided flat table turret Tool carrier plate interchangeable:210 [mm] - tool clamping surface:110 [mm] - Selectable for 2, 4 or 8 positions indexing:0.8 [sec.] - Repeat accuracy or linear system:0,001 [mm] Main dimensions - length:1 700 [mm] - Width:1 100 [mm] - Height:1 850 / 1 600 [mm] - Height spindle center above floor:1 120 [mm] - Weight:approx. 1 300 [kg]

Condition: good (used), 1 fused reducing sleeve size MK 6 Laodpfx Asgwt Uneacsh (Other sizes available in stock)

Condition: good (used), Year of construction: 1991, CNC lathe, Emag USC-2 Lodpfswbu A Asx Aacsah Built in 1991 Center distance: 1000 mm Turning diameter over bed: 600 mm Maximum spindle speed: 2800 rpm Power: 46 kW