Used crankshaft lathes for sale (12)

Condition: good (used), Year of construction: 1970, Centre height over bed: 2,100 mm Centre distance: 15,000 mm Faceplate (table) diameter: 3,500 mm Maximum swing diameter over faceplate: 3,120 mm Gsdpfxoyz Urdj Afceua Maximum swing diameter over bed: 4,150 mm Maximum swing diameter over carriage: 3,600 mm Maximum workpiece weight between centres: 180 t Bed width across guideways: 4,200 mm Bed height: 900 mm Bed length incl. headstock: 22,400 mm Spindle diameter at front bearing: 700 mm Tailstock quill diameter: 620 mm Faceplate speed range: 0.15 – 40 rpm Balancing device Electrical balancing via generator brake system and compensation weights in the headstock. Maximum balancing values per speed range: I: 7,500 kgm II: 2,850 kgm III: 1,250 kgm IV: 480 kgm The unit can be deactivated during standard turning operations. Crankpin machining group This unit is mounted on the support and enables: Minimum distance between spindle axis and centre of rotary ring: 700 mm Maximum offset for crankpin machining: 1,000 mm Steady rest Workpiece diameter: 500 – 1,000 mm

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well Guodpfx Afox Ik Tdocja as subject to prior sale!

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t Guedsx Ik Twspfx Afcja nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body Godpfx Aex I Simjfcjua There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1980, turning diameter over bed 410 mm turning diameter over slide rest 220 mm turning length 1000 mm centre height 205 mm spindle bore 46 mm spindle turning speed range 40 - 2000 U/min total power requirement 22,0 kW weight of the machine ca. 1,8 t Gujdpfxeyt R Iwo Afcja dimensions of the machine ca. 2,42 x 1,3 x 1,55 mm Lathes with: - Copying attachment - Forkardt 3-jaw chuck F250 - Multifix tool post - Coolant system - Machine light - Chuck guard - Chip tray - Chip guard wall - Foot brake

Condition: used, Year of construction: 1970, diameter / mm Cutting (quantity) / weight / kg This tailstock comes from the Froriep D1.050x10.000 crankshaft lathe. This is sold individually and can be used for various purposes Can be used, for example as a counter spindle or for other purposes. Gusdpfxjtnmmbe Afcea Center height: 500 mm

Condition: used, Year of construction: 1975, turning diameter over bed 820 mm turning diameter over slide rest 575 mm turning length 3300 mm centre height 410 mm spindle bore 125 mm spindle turning speed range 7,1 - 1400 U/min total power requirement 22,0 kW Gusdpfx Ajyfwykjfcja weight of the machine ca. 6,0 t dimensions of the machine ca. 6,3 x 1,6 x 2,0 mm Lathes with: - Digital readout - Rapid traverse - Röhm 3-jaw chuck 315mm - 4-position tool post - 2 steady rests - Coolant system - Emergency stop device - Machine light - Chuck guard - 2 chip trays - Spare jaws (internal and external)

Condition: used, Year of construction: 1959, turning diameter over bed 460 mm turning diameter over slide rest 280 mm turning length 1000 mm centre height 230 mm 720 mm spindle bore 53 mm spindle turning speed range 28 - 1250 U/min Gujdpfexpi A Dex Afcsa total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,4 x 1,4 x 1,75 mm Lathes with: - Digital display - Quick-release tool post - 3-jaw chucks (200 mm and 160 mm) - Chip tray - Centering center

Condition: used, Year of construction: 1967, turning diameter over bed 500 mm Gjdoxwzdcopfx Afcjua turning diameter over slide rest 320 mm turning length 2100 mm centre height 250 mm spindle bore 60 mm spindle turning speed range 11 - 2000 U/min total power requirement 7,0 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 4,3 x 1,2 x 1,3 mm Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Phases: 3 AC Frequency: 50 Hz Gsdpfxjwx Hkte Afceua Fusing: 250 A Rated current: 190 A EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MK 15982, center width: 700 mm, overall weight: 18,000 kg, TECHNICAL DETAILS General Data Distance between centers: 700 mm Maximum swing diameter: 200 mm Gedewx E Tmjpfx Afceua Specification Lathe with tools: 4 Suitable for: 3-cylinder crankshaft MACHINE DETAILS Machine weight: approx. 18 t EQUIPMENT Lathe with 4 tools only for 3-cylinder crankshaft

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Gsdjwgm Hkopfx Afcjua Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000