Used Lathe 16 K 20 for sale (66,853)

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Bodpfx Aaozav D De Iswu Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Hedelius RS 605 K 20, Year of manufacture: 2012, Heidenhain iTNC 530 control unit, Travel range right work area: 420/385/520 mm, Travel range left work area: 1330/650/520 mm, 2-axis NC rotary-swivel table 520 x 420 mm / right, Fixed table 1400 x 600 mm / left, Spindle speed up to 12,000 rpm, Water-cooled milling spindle, Water-cooled A + C axis / rotary table, Tool shank: SK 40, 30-position tool changer, Coolant pressure: 25 bar, Filter system: 500 liters, Partition for pendulum machining, Chip conveyor. Bodpfx Aozm Sfcoa Ijwu

Condition: like new (used), Year of construction: 2022, The robot is designed for multi-segment roadways, with a minimum travel distance of 6 meters and a total possible travel distance of 20 meters, at a height of 3 meters, using special columns. It is also possible to install the robot on the floor, but this requires minor modifications. Year of manufacture: 2022 Serial number: 1306061 Payload: 16 kg Weight: 296 kg Reach: 2013 mm Control system: KR C4 Bwjdezzbctspfx Aa Iou

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. ! Price per unit ! Last used for pumping caustic soda. Bedpswncv Rofx Aa Iswu Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Weight: 81 kg Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Condition: used, Year of construction: 1989, centre distance 2000 mm 600 weight of the machine ca. 3,2 t Passage 49 mm Digital Lynette Bedpfx Aoyi Hvvja Ijwu

Condition: good (used), functionality: fully functional, 4 x Wagner ZA 16 1 x Wagner MSD 20 19 mm shank, suitable for, e.g., Revolver Traub TD or Index A 25. List of thread inserts: M 0.8: 2 sets M 1.0: 7 sets M 1.25: 20 sets + 1 set on a Wagner head M 1.5: 7 sets + 2 sets on a Wagner head M 1.75: 5 sets In total, 44 sets of thread inserts. See also the photos. Bwodpfxjz H H A Te Aa Ieu The heads can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE Bwedpfx Aasz Ikq Dj Iju - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Bwjdpfx Asx Ii Hvea Iou Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), eutron 3416/16-Ex TPK 200 Temperature Test Chamber Manufacturer: Feutron Klimasimulation GmbH Type: 3416/16-Ex Series: TPK 200 Year of Construction: 2006 Machine Type: Temperature Test Chamber / Climate Simulation Chamber Test Chamber Volume: 280 liters For sale is a used Feutron 3416/16-Ex temperature test chamber with programmable control. The system was developed for professional temperature tests, environmental simulation, and material and component testing, and is particularly suitable for testing laboratories, electronics, research and development, and quality assurance. Technical Data: Model: 3416/16-Ex Series: TPK 200 Year of Construction: 2006 Operating Hours: 59,655 h Test Chamber Volume: 280 liters Temperature Range: -75 °C to +150 °C Temperature Deviation (over time): ≤ ±0.5 K Temperature Change (Heating): up to approximately 3.0 K/min on average Temperature Change (Cooling): up to approximately 1.0 K/min on average Test Chamber Material: Stainless steel, material no. 1.4301 Test Chamber Insulation: CFC-free multi-layer insulation Refrigeration System: Design: Water-cooled, semi-hermetic cascade system Refrigerant 1: R507 Refrigerant Quantity: 2.5 kg Refrigerant 2: R23 Refrigerant Quantity: 0.5 kg Continuous Sound Pressure Level: approximately 67 dB(A) Cooling Water: Cooling Water Pressure: min. approximately 2.0 bar / max. 6.0 bar Max. Cooling Water Temperature (Inlet): approximately 18 °C Cooling Water Temperature (Outlet): approximately 30 °C Average Cooling Water Consumption: approximately 0.3 m³/h Electrical Data: Supply: 400 V / 3/N/PE AC / 50 Hz Power Plug: CEE 5-pin, 16 A Max. Simultaneous Power Consumption: 5.6 kW Fuse Rating: 3 × 16 A, characteristic C Protection Class: IP20 Dimensions: External Dimensions (W × D × H): approximately 1,500 × 1,075 × 2,140 mm Min. Installation Dimensions: approximately 1,500 × 995 × 1,960 mm Installation Dimensions with Doors Open (W × D × H): approximately 2,400 × 1,990 × 2,140 mm Weight: approximately 680 kg Equipment: Bedpfx Aez Hl Dvoa Ijwu Programmable Feutron Controller LCD Display Program and manual operation Up to 20 programs can be stored RS-232 interface 3 stainless steel grids Test chamber lighting Observation window 1 × feedthrough Ø 75 mm with cover cap 2 × feedthrough Ø 75 mm on the side 1 × feedthrough Ø 100 mm on the side Compressed air connection Cooling water supply and return Additional temperature controller Accessories according to images Transport Data: Device (W × D × H): approximately 1,500 × 1,075 × 2,140 mm Weight: approximately 680 kg Min. Installation Dimensions after Dismantling Corresponding Components: approximately 1,500 × 995 × 1,960 mm Condition: Used Device starts up. Controller and display are active. Optical condition according to images. Scope of Delivery: Feutron 3416/16-Ex TPK 200 Temperature Test Chamber 3 stainless steel grids Fan / Accessories according to images Documentation according to images Availability: by arrangement. Scope of delivery as shown in the images. Subject to change, errors and prior sale.

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. The welding robot is being offered complete with enclosure and is available immediately. (Technical data can be found in the photos) Type: Reis RV 20-16 Bwedpfx Ajwra S Dea Iou Control and operator unit PHG 10-2 The system is located at our facility in Hungary / 2699 Szügy and will be sold from site. (Disassembly possible after consultation with buyer) We would be happy to welcome you for an inspection and demonstration of the system (by appointment). The system is sold with an unperforated welding table only!!!! (see last photo) The perforated version is not included in the sale.

Condition: good (used), Year of construction: 2016, operating hours: 7,074 h, fuel type: electric, mast type: triplex, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, Year of manufacture: 2016 Empty weight: 3.148 kg Battery: 625 Ah, 48 V, Year of manufacture 2016 Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids = More information = Number of valves: 3 Bwodoz H Uvnopfx Aa Iju Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: new, Year of construction: 2022, Manufacturer: RBC Robotics GmbH Type: Automation Brose oKMV Bwodpfx Aezuy Ibsa Ieu Year of manufacture: 2022 Machine no.: 20380 Length: approx. 20,000 mm Width: approx. 1,500 mm Height: approx. 3,000 mm Number of robots: 5 Power supply: 3 × 400 V + N + PE / 60 Hz Power: 57 kW Max. fuse: 100 A Control voltage: 24 V DC Mains system: TN-S Max. short circuit current: 10 kA Pneumatic operating pressure: 6 bar Weight: 25 t Equipment: Production part collection and transfer stations KUKA industrial robots: Manufacturer: KUKA Series: CYBERTECH-2 Model: KR 16 R2010-2 / SEL Number of robots: 5 Year of production: 2022 Number of axes: 6 Payload: 16 kg Reach: 2013 mm Weight: 296 kg

Condition: good (used), amount 1 STK Bedjzuum Ejpfx Aa Ijwu Dimensions (HxWxD) 280 x 190 x 190 mm diameter 60 mm -> Bestcut gear hobbing cutter with HSS cutting material - Chip angle < 8° -> Module 16 F.20° 1gg Lks -> BP IV D-Stg < 5°40' -> 5° 40' Sp Stg 00

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Bodjy E Ilxspfx Aa Iowu Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: like new (used), Year of construction: 2022, Year of manufacture: 2022 Serial number: 1306064 Payload: 16 kg Reach: 2013 mm Axes: 6 Bwjdjzzbd Repfx Aa Ieu Controller: KUKA KRC4

Condition: like new (used), Year of construction: 2022, Track width: 6 m Year of manufacture: 2022 Serial number: 1306065 Bjdjzzbddepfx Aa Iowu Payload: 16 kg Reach: 2013 mm Weight: 296 kg Number of axes: 6 Control system: KR C4

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Bjdpfozfguijx Aa Ijwu Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: like new (used), Year of construction: 2022, Robot installed on a two-segment track, with each segment 6 meters long, allowing a total travel distance of 12 meters, at a height of 3 meters, on special columns. Installation of the track on the floor is also possible, but requires minor modifications. Manufacturing date: 2022 Serial number: 1396062 Weight: 296 kg Bwjdpszzbbvsfx Aa Iou Payload: 16 kg Reach: 2013 mm Control system: KR C4

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. Bwjdpoxzix Aefx Aa Iju The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: excellent (used), Year of construction: 2005, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 (KR16-2 Foundry option is also available) Condition: Used & Tested Year: 2005 (more options are also available) Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Bwodpew Idvwjfx Aa Iou Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: excellent (used), Year of construction: 2018, operating hours: 25 h, functionality: fully functional, overall weight: 270 kg, load capacity: 16 kg, Robot fully functional. Robot complete with accessories. Bwedpfx Aajyrd Rie Iju

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, 1 x Parts Washing Machine Kraft K 20 Year of manufacture: approx. 1990 In very good condition Technical data: Drum capacity: 40 litres 24 rpm Dimensions (L x W x H): 0.7 x 0.8 x 0.65 m Bwedpfox Hffrjx Aa Iju The machine can be inspected under power.

Condition: excellent (used), Year of construction: 2013, Krauss Maffei KM 1600–17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 General description Modern injection molding machine equipped with a fully hydraulic clamping unit. The machine features an advanced MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Operation is performed via an integrated, 19-inch control panel with a color touchscreen, LED backlighting, and graphical visualization of all active processes (ProcessDesigner module). Plasticizing unit Complete unit for processing thermoplastic materials Screw diameter: 135 mm Version with wear-resistant (abrasion-resistant) protection Check valve Open nozzle Technical data Clamping unit Clamping force: 16,000 kN Opening force: 1,120 kN Dimensions of clamping plates (width × height): 2550 × 2100 mm Distance between columns (width × height): 1870 × 1420 mm Opening stroke: 2700 mm Mold height (min.–max.): 700–1600 mm Maximum daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection unit Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Injection weight for PE: 6860 g Bwsdpfxozrgfhe Aa Iou Screw speed (nominal / maximum): 81 / 100 rpm Electrical and hydraulic equipment Main motor power: 160 kW Installed heater power: 93 kW Number of heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 cycles/h Oil tank capacity: 2400 l Dimensions and weight Net weight (with control cabinet): 92 t Machine dimensions (length × width × height): 14.17 × 4.04 × 2.93 m

Condition: excellent (used), Year of construction: 2008, load capacity: 16 kg, arm reach: 1,611 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 Condition: Used & Tested Year: 2008 (more options are also available) Bsdpew Idvkofx Aa Iowu Controller Cabinet: KRC2 ED05 Included: Manipulator + KRC2 ED05 Control Cabin + All Wire Sets + Teach Pendant - FULL SET Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)"

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Bjdpfewwlkiex Aa Ijwu