Used CNC turning and grinding centers for sale (8)

Condition: used, Year of construction: 2009, Grinding machines Travel distance X: 600 mm Travel distance Y :600 mm Travel distance Z: 335 mm Grinding width: 335 mm Grinding length: 800 mm Ibodpfxow Eki Te Aacoc Max. grinding plates: 300 mm Grinding spindle drive: 9,3 kW Speed adjustable: 4200 rpm Distance: table till middle of the spindle: 620 mm Table size: 600 mm Table longitudinal feed oscillation: 50 m/min Table longitudinal feed creep speed: 5 mm/min PA37K – CNC Profile Dressing Device (Diamond Dressing System)

Condition: ready for operation (used), Year of construction: 2002, MAZAK SUPER QUICK TURN 100MSY CNC Lathe - High-Performance Turning with Y-axis (Price Negotiable!) Manufactured in 2002 in Japan by YAMAZAKI MAZAK CORP., this MAZAK SUPER QUICK TURN 100MSY CNC lathe is built for precision machining of workpieces with a maximum diameter of 280 mm. This machine comes with a comprehensive range of features, enhancing its versatility and productivity. All machining parameters are programmed through the advanced CNC control, which allows for the creation of complex programs in just a few steps. The MAZAK SQT 100 MSY CNC turning center weighs 4720 kg. Technical Specifications: ● Maximum turning diameter: 280 mm ● Maximum bar diameter: 51 mm Iedpfjwpxwmox Aacebc ● Maximum turning length: 309 mm ● Maximum main spindle speed: 6000 rpm ● Dimensions (L x W x H): 2100 x 1600 x 1800 mm ● Machine weight: 4720 kg Equipment: ● CNC Control: MAZATROL 640T ● Sub-spindle ● 12-position turret ● Chip conveyor ● Foot control Contact us today to discuss pricing and make an offer!

Condition: good (used), Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, chuck outer diameter: 250 mm, feed length X-axis: 680 mm, feed length Z-axis: 200 mm, power: 39 kW (53.03 HP), rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, controller manufacturer: Siemens, controller model: 840 DS, input voltage: 400 V, coolant supply: 6 bar, nominal power (apparent): 45 kVA, Equipment: rotational speed infinitely variable, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER EMAG - REINECKER VSC 250 DS Used, year of manufacture 2015 Control system: Siemens 840 DS Condition: Used machine, in good condition Machine operating hours (approx.): 35,000 Program run hours (approx.): 22,000 Operating voltage 400V Air connection 6 bar Total power requirement approx. 45 kVA Chiller water/water Machine dimensions without peripherals (L x W x H) approx. 3200x1900x2650 mm CYLINDRICAL GRINDING Integrated motor grinding spindle, max. speed 45,000 rpm and max. power 18 kW Touch dressing for ceramic CBN grinding wheels Vertical CNC turning and grinding center Automation / Gantry: EKF basket stacking cell as raw/finished parts storage for baskets 400x600 mm on floor trolleys 3 basket stacks for uninterrupted operation even during basket changeover, loading/unloading via loading gantry The machine is in well-maintained condition and has been serviced by EMAG. Isdolfduiepfx Aacebc The production process includes pre- and finish machining of the bore/face surfaces by hard turning the face surfaces as well as the diameter/bore, followed by internal cylindrical grinding. We have described the details relevant to the system as accurately as possible. An inspection under power is possible by prior appointment. Dismantling and loading of the equipment must be carried out by the buyer. Price and further details on request / special price All technical data subject to errors/typos. Sale only within EU countries

Condition: ready for operation (used), functionality: fully functional, CNC dividing head with stepper motor control, - Divisions from 1-999 possible - Odd divisions also possible - Ideal for face grinding, divisions – saws with high tooth pitch, or even slow cylindrical grinding of circular knives - Can be retrofitted to any tool grinding machine - Rotatable, pivotable in all directions, horizontally and vertically Ibodswmd Iropfx Aacec - Easy installation on the machine table using T-nuts - Can also be supplied with a small mounting angle - Center height 190 mm or 140 mm measured from the machine table. - CNC dividing head available with MT5 chuck or SK 40 chuck - Division is triggered via foot switch or optionally a simple contact/switch, etc. on the machine table can be triggered - The division process can be fully automated with the hydraulic machine table or linked via the CNC machine control system. New price: €12,800

Condition: used, Year of construction: 2007, machine/vehicle number: L151804, Nakamura-Tome NTM3 lathe together with a 6-meter IRCO SiMag Breuning bar feeder. The machine has been serviced throughout its life by Abplanalp service, who also disconnected it and prepared it for transport after production was finished. We took it in as a trade-in with plans to start some production, but it turned out to be too large for our needs – so we never even connected it since then. Technical details (from manufacturer): • Year of manufacture: 2007 • 11-axis Nakamura-Tome Super NTM3 • 2 spindles, 3 turrets • Every second tool driven • Control system: Fanuc 16i-TB • Main spindle: 15 kW, up to 4500 rpm • Sub spindle: 11 kW, up to 5000 rpm Ibsdpfx Aajxg Nb Iococ • Max turning diameter: 190 mm • Bar capacity: 65 mm • Machine weight: 12,000 kg Full documentation included: all manuals and schematics originally supplied with the machine. Additional equipment: • Parts catcher • Parts conveyor • Bar loader: IRCO SiMag • Electrical transformer • IRCO SiMag Breuning bar feeder (6m)

Condition: new, Year of construction: 2025, The Open CNC HM-100 is the compact model within the TX series and has been developed to meet the growing demand for smaller, rigid and accurate CNC machines for production environments. This machine is specifically designed for users who place high demands on speed, efficiency and precision. While the TX series is optimized for machining large workpieces and automated applications, the HM-100 is perfectly suited for manufacturing smaller workpieces, with the same level of accuracy and reliability. Working range X: 300 mm – 1300 mm (customization possible) Ibjdpowm H Ihjfx Aacec Working range Y: 300 mm – 1300 mm (customization possible) Working range Z: 100 mm (customization possible) Input voltage: 220V/380V Software Control : Included Servo motors: 400W Accuracy: 0.05 – 0.1 mm Movement speed: 5000 mm/min Machine table : Included Vacuum bed : Optional Automatic tool change : Optional Milling motor: 1.5 kW / 2.2 kW

Condition: excellent (used), Year of construction: 1994, Automatic CNC lathe Index GS42 Ibodpoiph Eqofx Aacjc Control Index C200-4 (Sinumerik S3TT) Spindle clearance 42mm, two machining heads (turrets) Turret 1 - X=120mm, Z=220mm, number of tools 12 including 6 driven, capture Turret 2 - X=120mm, Z=80mm, the number of tools 8 including 4 driven Dynamic C axis Bar feeder with magazine MINI SPRINT 3500mm and a set of reducing bushings Set of collets - 10 pieces Driven holders - 3 pieces Standard holders VDI20 - 5 pieces Machine in 100% working order and in perfect condition (keeps dimensions to 0.001mm)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1. 13 rotary tool holders (coolant through, 5 radial and 8 face) by ALGRA/MT Marchetti 2. more than 20 steady tool holders for turning and boring tools by ALGRA 3. 4 bolted tool holders by SAUTER/ALGRA 4. a mechanically operated bar puller toolholder by KINTEK 5. a live center Ibedpfx Ajvy Iqxoacoc 6. balanced pressure clamping (able to grip thin walled parts) 7. sets plastic drawtubes for bar working in different diametrers 8. more than 50 sets of soft machined jaws 9. 5 sets of hard jaws for different range of diameters and inside/outside clamping by SMW 10. SMW special ring for soft jaw turning/machining