Used CNC turning and milling centers for sale (594)

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Giedpszf H Ezefx Al Dsw Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 2,000 mm, Mazak CNC Mill – Turn Centre Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Distance Between Centres: 2000mm Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Giodpfxozlhp Is Al Dew Open Steady 600mm Air Filer Mist

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Godpfx Aezh Ndxol Deiw Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse X axis (max) 30m/min Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: excellent (used), Year of construction: 2021, 2021 Hurco TMX8MYSI Twin Spindle Lathe with Hurco CNC Control & Procobots Universal UR10E Robot Gsdpfjzk I Rpox Al Djiw Distance Between Centres Approx 725mm. Swing Over Bed Approx 500mm. Swing Over Cross Slides Approx 500mm. Max Turning Approx Ø330mm. Max Turning Length 527mm. Max Bar Capacity 65mm. 'X', 'Y' 'Z', 'W' Axis Travel 285mm x 560mm x 110mm x 640mm. Spindle Max Speed 4,500mm. Spindle Power 25kW. Spindle Nose A2-6. Kitagawa BR08 Power Chuck Ø203mm. Turret Tool Type VDI 40. (12) Station Tool Capacity. Remote Pendant Control. Procobots UR10E Digital Control Robot Arm, Max Payload 12.5kg, Max Reach 1,300mm. S/No. of Lathe ST8SV27103A1ERBAH. Including: Mobile Swarf Conveyor. Hung Ji Hydraulic Power Unit. Transformer. ICS Cool Energy Ic 220 Stand Alone Chiller. Weight of Lathe Approx 7,500kg. 415 Volt Power Supply.

Condition: excellent (used), Year of construction: 2021, 2022 Hurco TMX8MYSi Twin Spindle CNC Lathe With Hydrafeed MS65 Barfeeder Giedozk I Rcjpfx Al Djw

Condition: good (used), Year of construction: 2013, 2013 Doosan DBC130 CNC Horizontal Milling/Boring Machine Giodpfezk Dt Hjx Al Dew Table Dimension 1,800 x 1,600mm 913 'T' Slots). Maximum Table Load 15,000kg. Axis Travel 'X'=3,000mm, 'Y'=2,000mm, 'Z'=1,600mm, 'W'=600mm. Maximum spindle Speed 3,000rpm (26kW Motor). 90 Position ATC. S/No.MB0003-000431 (2013/08). With Coolant System. Overall Dimensions L8,970 x W7,660 x H4,910mm. Weight 43,000kg. D Turner & Sons, a pre approved site rigger, is available to provide immediate quotations for equipment removal. D Turner & Sons, a pre approved site rigger, is available to provide immediate quotations for equipment removal.

Condition: good (used), Year of construction: 2001, VICTOR V TURN 36 HYD 3 JAW CHUCK TAILSTOCK 2 AXIS 750 CENTRES Gedpfx Aezhwufjl Doiw SWARF CONVEYOR YEAR 2001

Condition: good (used), Year of construction: 2014, Mazatrol Matrix 2 Control, Table Size 500 X 400mm, Table Load 300 Kgs, Traverses X Y Z; 350 X 550 X 510mm, Min-Max Distance Spindle to Table 50 -560mm, C Axis 0.0001 Degrees, A Axis -120 ~ +30 Degrees, Spindle Power 22kW, Spindle Speed 12,000 Rpm, Gjdpfx Aljzibazo Deiw 30 Station ATC, Spindle Taper DIN 40, Coolant, Through Spindle Coolant,

Condition: as good as new (ex-display), Year of construction: 2024, New and unused, 340mm turning diameter, 570mm turning length, Y axis +/- 41mm, 400mm swing, Giedpfxeziavhe Al Dew 65mm bar capacity, spindle speed 4,500rpm, 15 station turret, 11/15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, FANUC-i control, tailstock, coolant, tool setter, swarf conveyor, parts catcher, 3 jaw chuck, tooling,

Condition: excellent (used), Year of construction: 2010, 412mm max. machining diameter, maximun turning length 753mm, 225 degree movement on B axis, Godpfx Ajwxw A Hsl Djiw 15HP spindle motor power, 6,000rpm spindle speed, 6,000 rpm sub spindle speed, 52mm bar capacity, milling speed 12,000rpm C axis & Milling, 9 station lower turret. Swarf conveyor, tool setter, Coolant, Interlocked guards, Swivelling Universal Head., C Axis (0.001deg), Mazatrol Matrix control

Condition: used, Year of construction: 2016, Mazak Variaxis i-500 5 Axis CNC Machining Centre. S/No. 276584 (2016) with Mazatrol Smooth X CNC Control, 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Mazak Spindle Chiller Unit, Absolent A Mist 10 Oil Mist Filter Extractor, Cromer Swarf Management and Filtration System, Renishaw RMI-Q Tooleye, Machine Weight 8000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Giedpfx Alozi S Ucj Dew Location: These lots are located in Gateshead, UK.

Condition: used, Year of construction: 2016, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 276585 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Gijdpfjzi S T Sjx Al Dow Location: These lots are located in Gateshead, UK.

Condition: good (used), Year of construction: 2011, Maximum machining diameter 42mm, maximum machining length 175mm, spindle power 7.5/5.5Kw , Gedpfxezg Egmj Al Doiw spindle speed 5,000rpm, 8 station turret, milling speed 5,000rpm, Fanuc OI-TD control, 3 jaw chuck, parts catcher.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, Gijdpfx Aezg Efiol Dow 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Gisdpjx Saulofx Al Dow

Condition: like new (used), MAZAK INTEGREX i-200 5 Axis Mill Turn Machine Year 2017, Smooth Control Kitagawa BB08 chuck, SMV power steady. 658mm max machining diameter, 1519mm max turning length Renishaw Probing, swarf conveyor, Gsdpfx Aljzilwwe Deiw A-Mist air filtration, FSE coolant filtration.

Condition: used, Year of construction: 2004, Mazak Integrex E-650H x 2000 CNC Multi-Tasking CNC Lathe. S/No. 168658 (2004) with Mazatrol Fusion 640MT Pro Control, Max Swing 920mm, Spindle Motor 45kW, Rotary Spindle Motor 37 kW, Max Spindle Speed 1600rpm, Spindle Bore 260mm Dia, X/Y/Z Travels 1025/650/2106mm, B-Axis -30deg/+210deg, C-Axis 360deg, Rapids X/Y/Z 40/40/40m/min, Max Rotary Tool Spindle Speed 10,000rpm, Tailstock Travel 1858mm, Tailstock Quill Stroke 160mm, Tailstock Centre MT6, Automatic 80 Position Toolchanger, Spindle Taper Capto C8, Cromar Swarf Conveyor. Country of Origin: Japan Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Godpfezhmt Dsx Al Deiw Location: This lots is located in Birmingham, UK. Please see individual lot for loading information and charges. All/Any tooling is being offered as specifically described.

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. 01908 Gisdpfxszgfvnj Al Djw Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Hardinge KL-1 Super Precision Lathe with Anilam Mini Wizard 2 Axis DRO, 5C Collet Chuck. S/No. KL1 - 2158 Gisdpfx Ajzgfp Isl Dew Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Hardinge Conquest GT Super Precision CNC Platten Lathe with GE Fanuc 18TB CNC Control, Filtermist F7 Oil Mist Filter Extractor, Hours 37637. S/No. GTA - 959 - B Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Gisdpfx Aszgfmmsl Djw

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. E01804 Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Giodpfx Aljzgfk Es Djw

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Barfeed. S/No. 4662 (2002) Hours 39693 & 14215. S/No. 938205 (2002) Gisdpfjzgfi Ijx Al Djw Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Multifeed 3 - 80N Barfeeder. S/No. 4661 (2002), Filtermist FX3000 Oil Mist Filter, Hours 40691& 16285 (2002) Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Gjdpfxezgfhqo Al Djiw

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, Gijdpfxozcy S Rs Al Djw maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 52mm, Gjdpjzcy Iljfx Al Doiw 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.