Used CNC lathes 600-699mm turning diameter for sale (49)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 01190000341, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16 to November 26. TECHNICAL DETAILS General Information Machine number: 01190000341 Operating hours: 57,730 h Control system: Heidenhain CNC Pilot Electrical Data Operating voltage: 400 V Frequency: 50 Hz Connected load: 58 kVA Rated current: 100 A Working Area Turning length: 1,000 mm Maximum diameter over the machine bed cover: 680 mm Maximum diameter over the guide cover: 455 mm Cross travel: 320 mm Longitudinal travel: 1,097 mm Main Spindle Spindle diameter: 220 mm Spindle head diameter at the front bearing: 140 mm Spindle bore: 107 mm Chuck diameter: 400 / 500 mm Speed range: 4–2,800 rpm C-axis Speed: max. 100 rpm Feed and Rapid Traverse Feed force X-axis: 8 kN Feed force Z-axis: 15 kN Rapid traverse X: 24 m/min Rapid traverse Z: 30 m/min Tool Turret Tool turret: 12-station Clamping Device 3-jaw chuck: Forkardt Chuck diameter: 300 mm EQUIPMENT 12-station tool turret Tool holders in the tool turret 3-jaw chuck by Forkardt Work table Cjdpfjz Uwzwex Ap Dehd Documentation Chip conveyor Extraction system

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Wemas Type: HITURN Year of manufacture: 1999 Machine number: 180 Machine type: Cycle lathe Chodpe Advbyofx Ap Djd Control System Control system: Heidenhain Electrical Data Operating voltage: 380 V Frequency: 50 Hz MACHINE DETAILS Performance Connected power: 11 kW Dimensions and Weight Length: 3,000 mm Width: 2,000 mm Height: 1,800 mm Weight: 3,000 kg EQUIPMENT Tailstock Multifix tool holder Steady rest

Condition: used, Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, Chsds Agkrvopfx Ap Dod 2042 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Hydraulic steady.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 918106, turning diameter over cross slide: 500 mm, turning length: 560 mm, turning diameter: 420 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 600 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,260 mm, total length: 3,430 mm, total width: 1,810 mm, feed length X-axis: 230 mm, feed length Y-axis: 110 mm, feed length Z-axis: 600 mm, swing diameter over cross slide: 500 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning diameter over bed slide: 650 mm, workpiece weight (max.): 230 kg, turning diameter over top slide: 500 mm, type of input current: three-phase, torque: 287 Nm, overall weight: 5,800 kg, swing diameter over bed slide: 650 mm, bar passage: 65 mm, chuck outer diameter: 250 mm, center width: 560 mm, spindle nose: A2-8, bar diameter (max.): 65 mm, Equipment: rotational speed infinitely variable, 🔹 FOR SALE: 2006 Goodway GS-260MYS CNC Lathe – Very Good Condition – Ireland 🔹 Make: Goodway Model: GS-260MYS Year: 2006 Control: Fanuc Series 18i-TB Machine Type: CNC Turning Centre with Sub Spindle, Driven Tools, Y Axis & C Axis Condition: Very Good Location: Ireland Availability: Immediately available 📌 Description: For sale is a 2006 Goodway GS-260MYS CNC Lathe, a powerful multi-axis CNC turning centre equipped with live tooling, Y-axis milling, and a sub spindle. This robust machine is ideal for complex turning and milling operations in a single setup — perfect for modern precision engineering environments. Maintained in very good working condition, it includes a selection of manual and driven tool holders, 2 chucks, and a swarf conveyor. 🔧 Technical Specifications: Main Spindle: Chuck Size: 10" (250 mm) Bar Capacity: 65 mm Spindle Nose: A2-8 Max Swing: 650 mm Swing Over Saddle: 500 mm Max Turning Diameter: 420 mm Standard Turning Diameter: 205 mm Max Turning Length: 560 mm Max Part Weight: 230 kg Hole Through Drawtube: 65.5 mm Hole Through Spindle: 76 mm Spindle Drive: Direct Belt Drive Spindle Speeds: 40 – 4,000 rpm Continuous Spindle Motor: 11 kW 30-Min Spindle Motor: 15 kW Spindle Torque (Cont.): 210 Nm Spindle Torque (30 Min): 287 Nm Axes: X Axis Travel: 230 mm Z Axis Travel: 600 mm Y Axis Travel: ±55 mm X/Z Rapid Traverse: 20 m/min Z2 Axis Travel (Sub Spindle): 600 mm Z2 Rapid Traverse: 24 m/min Tooling: Turret Stations: 12 OD Tool Shank Size: 25 mm ID Tool Shank Size: Up to 40 mm Live Tooling Stations: 12 Live Tool Drive Motor: 4.5 kW Live Tool Torque: 22 Nm Sub Spindle: Chuck Size: 6" Spindle Nose: A2-5 Hole Through Spindle: 46 mm Continuous Motor Output: 5.5 kW 30-Min Motor Output: 7.5 kW Spindle Speed Range: 60 – 6,000 rpm Drive: Built-in Motor Construction: Slideways: Hardened & Ground Box Ways Machine Dimensions: 3430 x 1810 x 2260 mm Machine Weight: 5,800 kg 🧰 Included with the Machine: Cjdpfx Apswtpdfs Dshd Selection of Driven Tool Holders Selection of Manual Tool Holders 2x Chucks Swarf Conveyor Note: Tools shown in photos are not included – only the holders are provided. 🛠 Suitable For: Precision turning, mill-turn applications, production of complex components in aerospace, medical, automotive, and general engineering sectors. Used CNC Lathe Ireland, Goodway GS-260MYS for Sale, CNC Lathe with Y Axis and Sub Spindle, Live Tool CNC Turning Centre, CNC Turning Machine Europe, Fanuc CNC Lathe for Sale, Multi-Axis Lathe Machine Used Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2012, CNC lathe TAKANG TNC-N200DS-B Codpe Agcrgjfx Ap Djhd Control: Fanuc 0i-TD Configuration: Twin spindle, inclined bed, 12-station servo turret Swing over bed: Ø 650 mm Max. machining diameter: Ø 490 mm Max. machining length: 510 mm Main spindle nose: A2-6 Main spindle bore: Ø 61 mm Main spindle bar capacity: Ø 51 mm Main spindle bearing (ID): Ø 100 mm Main spindle hydraulic chuck: 8″ Main spindle speed range: 42 – 4,200 rpm Sub spindle nose: A2-5 Sub spindle bore: Ø 56 mm Sub spindle bar capacity: Ø 45 mm Sub spindle hydraulic chuck: 6″ Sub spindle speed range: 60 – 6,000 rpm Sub spindle stroke (E axis): 500 mm Turret: 12 stations, servo X-axis travel: 280 mm Z-axis travel: 560 mm Rapid traverse X / Z: 20 m/min Tool change time: 0.2 sec Tool holder: □ 20 mm Max. boring bar: Ø 32 mm Main spindle motor: Fanuc 18iP, 9 / 11 kW Sub spindle motor: Fanuc 6i, 5.5 / 7.5 kW Hydraulic pump / tank: 1.5 kW / 60 l Coolant pump / tank: 750 W / 100 l Machine weight: 7,030 kg Year of manufacture: 2012 (July) Manufacturer: CNC-Takang, Taiwan For more information, please contact us.

Condition: excellent (used), Year of construction: 2000, GILDEMEISTER DMG-CTX 400 twin CNC lathe with twin spindles and a single turret, year 2000 Includes workbench and its contents, and one tool cabinet with its contents. Cedpfx Aps Ah Hyws Dohd

Condition: good (used), Dean Smith & Grace Type 25 x 120 Lathe Excellent condition. 120" between centres 25" swing DRO Csdpfx Apez S Adle Dohd 3 Steadies included 4 Jaw Chuck

Condition: excellent (used), Year of construction: 2012, Capacity Swing over bed 950mm Swing over carriage 630mm Max turning diameter 950mm Max turning length 4845mm Distance between centres 5000mm Max load between centres 5000kg Spindle Spindle speeds 2 - 630rpm 630 H Max 205 L Max Spindle speed range step manual 2 Spindle nose type A2-15" Spindle bore 254mm Spindle centre taper MT6 Cedpfx Apezhaqvo Djhd Number of Tool positions 8

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC turning machine Okuma LB 400-M Control system: OSP-E100L Cjdps Ahm Upjfx Ap Dehd Year of manufacture: 2005 Internal machine number: 83 Turning length: 1,250 mm Turning diameter: 620 mm Spindle speed: 3,500 rpm Tool turret: 12 stations (powered) Tool holder: VDI 40 Spindle bore: approx. 110 mm 3-jaw chuck Kitagawa B15 Equipment: - Chip conveyor - Coolant system - Touch probe - Tailstock

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Spindle bore 275mm, 10 station turret Chjdpfxez D Axfs Ap Dod 45kW spindle motor, FANUC Series 32i control, 24” 3 Jaw manual Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 14,000 kg, The GOODWAY GS-460L is in good condition. An inspection and functional test under power can be arranged by appointment. The machine comes with extensive accessories, including various chucks, drills, and holders. The machine has a manual tailstock. Chedpfxj Agn I Ss Ap Dod Technical specifications: Year of manufacture: 2007 Control system: FANUC Oi-TC X-axis travel: approx. 330 mm Z-axis travel: approx. 2,032 mm Max. turning diameter: approx. 610 mm Swinging diameter over bed: approx. 737 mm Spindle bore: 205 mm Spindle speed: 1,300 rpm Spindle motor: 37 kW Tool turret: 12 stations Machine weight: approx. 14,000 kg

Condition: ready for operation (used), Year of construction: 2020, operating hours: 6,056 h, spindle speed (max.): 3,600 rpm, total height: 2,135 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: 840D, workpiece diameter (max.): 600 mm, number of slots in tool magazine: 12, This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Large number of turning holders for vdi 50 turrets, holders for hobbing gears, grooves, gear teeth, etc. , large block holder (sauter) for holding boring tools, driven angle milling attachment (mt), 2 × driven straight holders (ews). • Slide traverse x / ±y / z: 415 / ±75 / 2025 mm • Hydraulic oil capacity: approx. 40 l • Max pressure: 90 bar • Clamping device pressure (max): 10–70 bar Chsdpsx D Iv Ejfx Ap Dsd • Coolant tank capacity: approx. 250 l • Pump power: 0. 85 kw • Pump nominal delivery at 5 bar: 20 l/min • Room temperature: +15 to +35 °c • Max relative air humidity: 75% Technical Machine Benefits • Ism102: 33 kw • Ism102plus: 40 kw torque (100% ed) • Ism102: 580 nm • Ism102plus: 1700 nm • Thrust (s6 - 40%): 9 / 9 / 13 kn • Max turning length: 2000 mm • Bar capacity: 102 mm • Clamping chuck diameter: 315 mm • Tool system: din 69880 (vdi 3425, page 2) • Tool shank diameter: 50 mm Extra Information Machine still under power. The machine is equipped with a fume extraction system, chip conveyor, Siemens CELOS control system with touchscreen, automatic tailstock, automatic steady rest unit, hydraulically clamping chuck, and increased coolant pressure through the tool spindle. Dimensions Machine Depth 5564 mm

Condition: good (used), Year of construction: 2007, swing over cross-slide 935mm, swing over cross-slide 738mm, Chedsz D H Nuopfx Ap Ded Maximum cutting diameter 620mm, Maximum cutting length 2158mm, Bar capacity 130mm, Spindle speed 2,400rpm, Main spindle power 30 Kw, 12 station turret. Mori Control M730BM, swarf conveyor, 3 jaw chuck, fixed steady.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC Turning and Milling Center Okuma Multus B300II-W Control: OSP-P 300SA Year of manufacture: 2022 Internal machine no. 55 X-axis: 580 mm Chsdpfxjy Ewy So Ap Djd Y-axis travel: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° increments W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40 positions Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. 20 bar pump - Preparation for in-process measurement - Tool height adjustment in Y-axis for turning tools - Hi-Cut Pro high speed control

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, CNC turning center Okuma LU 45 M -3000 Control: OSP-P200L Year of manufacture: 2009 Internal machine number: 81 Max. turning diameter: 660 mm Codjz Rl H Hopfx Ap Djhd Max. turning length: 3,000 mm Spindle bore: Ø 260 mm Spindle speed: 2,800 rpm Travel distances: X-axis: 420 mm Z-axis: 3,025 mm Spindle power: 30 kW Accessories - Chip conveyor - Tool turret with 12 stations - Tools

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Type of machine: Nef 600 Year of manufacture: 2007 Chodpfsxnpbqex Ap Dsd Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Spindle opening: 90 mm

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Csdpfx Aj Ad Izlsp Dshd Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: used, Year of construction: 2000, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 290 mm Control Siemens 840D Turning length: 850 mm Csdpfx Asydfpdjp Dshd Rotation diameter over table: 600 mm x-axis: 220 mm z-axis: 950 mm Control: Siemens 840D Speeds: 0-4500 rpm Tool revolver: 2 pieces Spindle bore: 65 mm Rotation diameter: 290 mm Feed rate x/y: 25 m/min Rapid traverse x/z: 25 m/min Working height: 1200 mm

Condition: excellent (used), Year of construction: 2023, CNC turning and milling center Okuma Multus B300 II Control system: OSP-P 300SA Year of manufacture: 2023 Internal machine number: 32 Travel distances: Turning length: 900 mm Maximum turning diameter: 630 mm X-axis: 580 mm Y-axis: 160 mm (+80/-80 mm) Z-axis: 935 mm B-axis: 225° (-30° / +195°; 0.001° increments) C-axis: 360° Tool holder: HSK-A 63 Total number of tool positions: 40 Spindle speed: 50 – 5,000 rpm Accessories: Chip conveyor Chjdpfx Aeyk Uhcsp Djd NC-controlled tailstock, MT5 Touch probe High-pressure pump, 40 bar Renishaw probe prepared 3-jaw chuck Kitagawa B212, Ø304 mm

Condition: excellent (used), SPINNER TC600-65 SMCY | Year of manufacture 2012 | Y-axis | BMT45 | driven tools | Siemens 840D | 15 bar HPC For sale is a high-quality CNC turning center, the SPINNER TC600-65 SMCY, manufactured in 2012. Technical data: Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH Type: TC600-65 SMCY Year of manufacture: 2012 Machine number: AT0560 Working area: • Max. turning diameter: 400 mm • Max. turning length: 650 mm • Max. swing diameter: 600 mm • Travel in X-axis: 275 mm • Travel in Y-axis: mm • Travel in Z-axis: 700 mm • Spindle bore: 65 mm Tool system: • 16-position turret BMT45 • 16 driven tool stations • Spindle orientation • Tool measurement in the working area Control system: • Siemens 840D Equipment: • Y-axis for complex milling and drilling operations • 16-position BMT45 turret with driven tools • Direct measuring system in the X-axis • Tailstock • High-pressure coolant system 15 bar • Automatic sliding door • Robot interface for automation solutions • Hardened and ground slideways • Heavy-duty, FEM-optimized machine bed made of cast iron • High vibration damping for precise machining results Electrical data: • Mains connection: 400 V • Frequency: 50 / 60 Hz • Operating current: 53 A • Rated current: 63 A Codpfx Aezgvgkep Dshd ✔ Y-axis and driven tools for complete machining ✔ Automation-ready via robot interface ✔ Powerful Siemens Sinumerik ONE control system Bar loader: CUCCHI GIOVANNI CNC-DB70 Stand loader 3300mm, 12-70mm diameter Year of manufacture 2012 is included in the price. The machine is in technically perfect and well-maintained condition and can be inspected under power by appointment. Further technical documentation, accessory lists, videos, as well as information on price and availability are available upon request.

Condition: good (used), spindle bore: 310 mm, travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, spindle motor power: 45,000 W, rotational speed (max.): 500 rpm, total height: 2,100 mm, total length: 8,100 mm, total width: 2,750 mm, overall weight: 13,000 kg, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Chjdpfxowxb Ere Ap Dsd Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1992, turning diameter over cross slide: 800 mm, turning length: 3,100 mm, turning diameter: 550 mm, spindle speed (max.): 350 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 3,000 mm, Very clean Heid S500 CNC Lathe with closed slide. Diameter 800mm over slide Diameter 550mm over carriage Total turning length capacity 3100mm In 2018, the CNC unit was completely replaced, and a Fagor 3-axis control system was installed. The machine is in working condition and can be seen in operation. Codpfezl H Tlex Ap Djhd

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 340 mm turning length: - mm centre distance: 1500 mm swing diameter: 500 mm centre height: 250 mm control: Heidehain Plus spindle bore: 80 mm range of revolution per miute: 20 - 2400 U/min total power requirement: 11 kW weight of the machine ca.: 0,25 t Csdpfx Apozu Ndle Dohd dimension machine approx.LxWxH: 3,2 x 1,7 x 1,8 m

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-position turret VDM 40 - C-axis Chodpsyfnqgsfx Ap Ded

Condition: ready for operation (used), Year of construction: 2005, 1 used CNC lathe with driven tools and Y-axis. Control system: Siemens. The machine can be inspected while powered on, by prior arrangement. Chedpfx Aszgtgbep Dsd