Vertical cnc lathe MACHING CENTER ROTARY TABLE 14
MIBA MCRT 14 - Used machine
Year 2017
Maximum allowed diameter 13000 mm
Minimum diameter allowed 9500 mm
Longitudinal stroke [X] 1500 mm
Fast longitudinal feed 5000 mm/mn
Vertical travel of the crossbar on the column [Z] 4000 mm
Hgtqwun
Infinitely variable vertical feed 5000 mm/min
C axis 360° (infinitely variable)
Table rotation speed 2 rpm
Spindle tilt [U] 180
Spindle speed 3000 rpm
Spindle power 29,4 KW
Spindle taper HSK100C
Total power 200 H...
---RESERVED---
CNC Lathe
Technical details:
Turning diameter 185 mm
Control Fanuc 18 with Macro-B
X-axis 2x 195 mm
Z-axis 265 (B 780) mm
Spindle passage 60 mm
C-axis 0,001°
Turning speeds: 50-5.000 RPM
Tool turret with 12 work positions 2
x12 (all driven)
Turning speeds : 3600 RPM
Iqufj0c
Accessories:Chip conveyor
Machine needs repair in the control unit. Until this defect appeared, the machine was in production.
Transport + loading is for buyer
Control Fanuc,
turret,
loading device,
chip conveyor,
raw parts bunker,
Finished part separator,
Büchele high-pressure system,
Covbn227
operated with cutting oil only.
Sinumerik 840D control
main spindle: collet chuck device
opposed spindle: collet chuck device
driven tools
c-axis at main and opposed spindle
y-axis
2x 12-fold revolver (all stations are driven)
bar loading device FMB
chip conveyor
some fixed and driven tool holders are with the machine
Technische Daten / technical details:
Umlauf-Ø über Bett / rotary Ø over bed 145 mm
Drehdurchmesser / turning Ø 100 mm
Spindelabstand / distance between spindles 580 mm
Schlitten 1: mm
Planweg X-Achse / trave...
.
Jyhjnm
turning diameter wird noch genannt mm
turning length wird noch genannt mm
control FAGOR
condition sehr gut
steady
Planscheibe
weight of the machine ca. 12,5 t
CNC lathe WEISSER Univertor A 90L
Maximum clamping diameter: 200 mm
Maximum workpiece diameter: 120 mm
Maximum workpiece length: 400 mm
Travels
X-Axis: 280 mm
Z-Axis: 500 mm
Qjc0d
Control Siemens Sinumerik
Rotary turret with 12 tools
With automated loading and unloading
Control Fanuc,
turret,
loading device,
chip conveyor,
unmachined parts conveyor,
Finished part separator,
high pressure pump,
Myfy90
operated with cutting oil only
turning diameter 42 mm
turning length 250 mm
control
total power requirement kW
weight of the machine ca. t
I27juqslg
dimensions of the machine ca. m
CNC-lathe with bar feed
with Sameca bar feed
CNC Lathe "Stopp GmbH", Sinumerik 828D, C-Axis, mint condition with only 3000 working hours, Minimal Oiling Spray System "Rexim" also for inner cooled tools and program controlled, Spindel Nose KK5, Bar passage 51 mm, Travel Z300 X200, 10x Linear tools capacity, very fast and strong machine, Spindle bearing for hard turning, compact measurements with LxDXH 1250x1900x1600, 1350 KG
Cir9eokd98
Ask vor Video of the machine.
turning diameter 120 mm
turning length 650 mm
control SIEMENS
control SINUMERIK 840 D
swing diameter 250 mm
spindle distance 900 mm
travel x1 300 mm
travel z1 650 mm
travel x2 180 mm
travel z2 650 mm
travel y1 +/- 40 mm
travel sub spindle x3 175 mm
travel sub spindle z3 670 mm
main spindle bore 42 mm
Main spindel power 25 kW
main spindle speed 35 - 7000 U/min
max. torque max. 200 Nm
sub spindle bore 42 mm
sub spindle - spindle speed range 35 - 7000 U/min
sub spindle - spindle torque max. 200 N...
Mazak Super Quick Turn SQT-MS10
Mazak SQT-MS10
Control MAZATROL T2 Plus
Bj: 1995
4-axis turning center with 12-station tool turret, driven tools and counter spindle
additionally equipped with a loading magazine for bar processing up to a length of 3,000 mm
Second hand
Maximum turning length (Z-axis) 12 in
Turning diameter over cross slide (max) 9.1 in
Number of spindles 2 pcs
Diameter of the spindle bore 1.7 in
Number of tool turrets 1 pcs
Total number of tools in the turret 12 pcs
Number of dr...
Swiss-type CNC Lathe
CNC Control CINCOM system M6
Turning diameter 20 mm
Turning length 200 mm
Spindle bore diameter 21 mm
2bwh8oi
Spindle speed 200 - 10.000 1/min
X-axis movement 45,5 / 316 mm
Y-axis movement 294 mm
Z-axis movement 205/180 mm
Number of turning tools 6
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
QTN 200 with subspindle and driven tools
Max. turning diameter 276mm
Bar capacity Ø65
Evhbp9eem
spindle nose A2-6 with Hainbuch collet chuck 35-500 revolutions
subspindle Kitagawa chuck 35-6000 revolutions
12 compartment turret
5100 Kg
>>bar feeder FMB LS80 V is from 2021
>>conveyor belt
Machine was very well maintained and serviced
The machine is still in production and can be inspected under chip removal.
Machine is available from about July -
swing diameter 530 mm
turning diameter 150 mm
spindle passage 65 mm
control SIEMENS 840 C
travel x1 175 mm
travel y1 +/- 70 mm
travel z1 433 mm
travel x2 175 mm
travel y2 +/- 70 mm
travel z2 433 mm
spindle turning speed range 38 - 4000 U/min
C-axis 2 x
tool turret 2 x 12 Pos.
number of driven tool stations 2 x 12
total power requirement 33 kW
dimensions of machine L x W x H 3,95 x 2,49 x 2,6 m
Bm9iyy9k33
Accessories: collet fixtures on main spindle and sub spindle, one collet
for main spi...
Schaublin 125 CCN lathe
TECHNICAL DATA
Capacity
Largest turning diameter: 270 mm
Largest permissible diameter over slide: 115 mm
Center height over slide: 60 mm
Maximum turning length: 365 mm
Center height above ground: 1162 mm
Cross slide
Cross travel, X-axis: 190 mm
resolution, X-axis: 0.0005 mm
longitudinal travel, Z-axis: 390 mm
Resolution, Z-axis: 0.001 mm
Feeds
Working feeds, X and Z axes, stepless: 0 - 5 m/min
Rapid feeds, X and Z axes: 8 m/min
Turret
Tool holder system: VDI ...
Manufacturing origin CH
Netweight 1600 kg
Bokitou0zn
Custom position 8458.9120
Dimensions 167x87x165 cm
With bar-feeder LNS Tryton 112
TECHNICAL DATA
Control Fanuc série 32i-B
5 linear axes :
Longitudinal travel of main spindle Z1
Longitudinal travel of backwork counter spindel Z4
Cross travel of tools X1 (turning operations and cross milling)
Cross travel of tools Y1 (tools selection and milling operations)
Radial plunge of 2 tools (T21 et T22) X2
Spindel (mounted on Z1-axis) :
Max b...
turning diameter over bed: 180 mm
turning dia. over face-slide: mm
turning length: 490 mm
swing diameter: 450 mm
cross travel: Z-Weg: 168 mm
control: Traub TX8D
revolution per minute: 20 - 4000 U/min
spindle passage: Ø 60 mm
operating hours - idle run: 23.495 h
Synwano
tool turret: 12 tools
total power requirement: 38 kW
Weight approx.: 4,2 t
dimension machine xH: 3,6 x 2,5 x 2,2 m
Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63
Röhm lathe chuck Ø 200mm hydraulic clamping
Operation via d...
control: MORI SEIKI
condition, very good, used
Technical data
- number of axes: 8 (X1 / Z1 / Y1 / C1 / X2 / Z2 / C2 / Z3)
- number of spindles: 2
- number of turrets: 2
MAIN SPINDLE
- power of the spindle drive: 18 [kW]
- Spindle speed: 6000 [rpm]
- Max. Diameter of the bar: 52 [mm]
- Max. Diameter of the main spindle chuck: 200 [mm].
- Minimum resolution of the C axis: 0.001 [degree]
COUNTERSPINDLE
- Spindle drive power: 18 [kW]
- Spindle speed: 6000 [rpm]
- Max. Machinable diameter: 200 [m...
turning diameter 32 mm
turning length 200 mm
control TX 8i
Part length max. 220 0
bar length 3100 mm
total power requirement 33 kW
weight of the machine ca. 7,2 t
dimensions of the machine ca. 9,6 x 1,7 x 2,2 m
Bar loading magazine FMB Turbo 5-42 / 3200 / S built in 2001
Chip conveyor with coolant pump
no further accessories
B23rcz3t0i
Offered is a CNC universal slant bed turning machine EMAG USC1.
The machine is equipped with a fixed spindle unit, a movable tool turret slide (X/Z) and a movable tailstock.
In 2007, the machine was equipped with a Siemens 840D Powerline control and was subsequently used in the training workshop.
In 2016, the machine was decommissioned and put into storage.
The machine is sold in untested condition as seen in the pictures.
TECHNICAL DATA
Workpiece diameter: 200 mm
Turning length: 630 mm
Centre...
Emco Hyperturn 665 MC Plus TCMY,
Year of manufacture 2013,
control Fanuc 18 i - TB,
bar feeder ENTL 10-65,
2 turrets 12-fold VDI 30,
tools applied,
2 x C axis 0,001°,
main spindle up to 5.000 rpm,
counter spindle up to 7.000 rpm,
Y axis +/- 50 mm,
chip conveyor,
Leyaqr3b
2 high pressure pumps 14 bar,
2 flushing pumps 3,7 bar,
upper turret renewed 11/2022,
Fanuc 31i-Model B
X-axis, both upper & lower turrets 170 mm
Y-axis, both upper turrets 90 mm
Z-axis, both upper turrets 230 mm
Z-axis, lower turret 540 mm
B-axis, movement sub spindle 670 mm
Max. turning diameter 200 mm
Max. turning length 230 mm
Main spindle 15 kW, spindle nose ASA5
Main spindle, max. speed 5.000 rpm
Main spindle bar capacity 52 mm
Sub spindle 11 kW, spindle nose ASA5
Sub spindle max. speed 5.000 rpm
Chueqyqhyz
Sub spindle bar capacity 45 mm
3 x 12-station turrets
3 x 12 driven...
turning diameter over bed: 180 mm
turning dia. over face-slide: mm
Brl7pzpj8z
turning length: 490 mm
swing diameter: 450 mm
cross travel: Z-Weg: 168 mm
control: TraubTX8D
revolution per minute: 20 - 4000 U/min
spindle passage: 60 mm
operating hours - idle run: 86.285 h
tool turret: 12 tools
tailstock taper ISO: MK 5
tailstock quill stroke: 48 mm
total power requirement: 38 kW
Weight approx.: 4,2 t
dimension machine xH: 3,6 x 2,5 x 2,2 m
Tool holder cylindrical shank DIN 69880 (VDI 3425) Ø 40x63
...
CNC swiss type automatic lathe
brand: STAR
type: SR16
new in: 1996
equipped with: FANUC 16T control
subspindle
Rb2hj
driven tools
back working
parts conveyor
barloader FMB TURBO 3-26
EMCO EMCOTURN 340 CNC lathe Siemens 810T control system
Chuck Röhm
Accessories holder VDI 30
Disc turret VDI 30 Sauter
Swing over bed 340 mm
Swing diameter over face plate 158 mm
Carriage travel
longitudinal Z-axis 300mm
plane X-axis
Drive power 100%/60% ED. 11/15KW
spindle connection A5
spindle bore Ø42mm
speeds 60-4000 1/min
Tailstock
weight ca 2400KG
Year of manufacture13.2.1989
Full clamping cylinder
Cilvhaflgn
see pictures
from stock (traces of storage)
For further technica...
Fanuc control
Swing over bed 350mm
Swing over crosslide 200mm
X-travel 260mm
Z-travel 250mm
Max turning length and diameter 127x127 mm
Spindle speed 100-5000rpm
Spindlemotor 3,7/5,5 kW
Has only been used for demo. More or less in new condition. Immediately available.
B9jmteeco9
Technical details:
Control: 2 channel Siemens 840 D
main spindle: passage 42mm
C-axis
Y-axis
turret 1: 12-position with VDI 25 single position drives turret 2: 7-position VDI 16
counter lockers : passage : 26mm
turret 2: 12-place with VDI 25 single place drives
B79rrlb2r2
Accessories:
Unloading device with unloading belt
Coolant system with heat exchanger
Extinguishing system
Suction Elbaron
Chip collecting container
Bar feeder interface
CNC turning center Spinner TS46-SMC, counter spindle, driven tools, bar feeder
counter spindle,
driven tools,
bar feeder Iemca Boss 545, BJ 2007
year of construction: 2007
passage over the bed: 680 mm
bar feeder diameter: 46 mm
Working range:
X- 640 mm
Z- 240 mm
spindle speed: 5,000 rpm
tool head: 12 pcs (all driven)
Bh2ywyf
Control: CNC Fanuc 18i-TB
Technical details:
Control: 2 channel Siemens 840 D
main spindle: passage 42mm
C-axis
Y-axis
turret 1: 12-position with VDI 25 single position drives turret 2: 7-position VDI 16
counter lockers : passage : 26mm
Qs9qf
turret 2: 12-place with VDI 25 single place drives
Accessories:
Unloading device with unloading belt
Coolant system with heat exchanger
Extinguishing system
Suction Elbaron
Chip collecting container
Bar feeder interface
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Sell now on Machineseeker! Over 250,000 inquiries per month
10 valuable tricks for buying used machines online
Photo gallery: the 10 strongest forklift trucks in the world
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker still biggest sponsors of 2nd German football league
Sample sales contract for used machines in nine languages
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.