Used Automatic Turret Lathe for sale (28,760)

Condition: good (used), Ward turret lathe Chuck diameter: 200 mm Turning diameter bed: 290 mm Support turning diameter: 170 mm Stroke: 185 mm Nwelhcdweq H Aqqe Djf Clearance: 32 mm Dimensions: 205x105x135 cm LxWxH

Condition: good (used), Year of construction: 1965, Turret lathe HESTIKA Type: HR32 built approx. 1965 Spindle capacity max: 32 mm with tool turret, collet chuck device, Spindle speed :200-3200 rpm with coolant device, machine documentation . Nwelhcdovgbphow Dof Good condition Ready for immediate use .

Condition: not inspected (used), Year of construction: 1987, Spindle count: 1 Spindle passage: 20 mm Turning length: 350 mm Turning diameter over bed: 240 mm Rotational speed: 23-4457 rpm Spindle bore: 22 mm Material length: 2000 mm Voltage: 3x380/50Hz V / Hz Nslhcol D I Tvjdw Dewf SINGLE-SpINDLE CURVE CONTROLLED ROTARY AUTOMAT with bar feeder Number of travels: 5 axes Turret support travel lengthwise 60mm, centre height 125mm Turret head for 6 tool holders, currently 3 occupied. Equipment: Collet chuck Tool holder by means of clamp with screws Description subject to change, errors and technical modifications excepted

Condition: excellent (used), Year of construction: 1990, 1 x automatic lathe Traub TK 60 Year of manufacture: approx. 1990 Equipment: 6-way turret Long turning device Nelhcdwjvp U Hfs Dswf The machine can be viewed under power or a video can be sent.

Condition: good (used), 2 pieces branded turret automatic lathes, make Index, type OR with many accessories Specification: Largest diameter 12 mm Number of spindles 6 Number of spindle speeds 10 pieces Nslhcdweium Ugj Dswf Minimum spindle speed 950 1/min Maximum spindle rotation speed 7500 1/min Weight of the machine 1 t (for further data see type plate)

Condition: used, machine/vehicle number: B33652, spindle passage:60 mm turning length:45 mm boring depth::56 mm turning speeds::70 mm total power requirement:5,5 kW dimensions of the machine ca.:2100 x 1000 x 1800 mm Nwjlhcotzf Slodw Dof weight of the machine ca.:2,4 t

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm Nwslhceu Iwyijdw Dof drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Condition: good (used), Year of construction: 1975, Turret lathe HESTIKA Type:HR42 built approx. 1975 Spindle capacity max : 42 mm with turret head and tool holder Multifix Type:B Spindle speed: 88 - 2800 rpm Collet chuck device, coolant device, machine documentation. Nolhcevgbqfjdw Dewf Machine in good condition .

Condition: good (used), Year of construction: 1996, 1 x automatic lathe MAS A 40 CA Year of construction: 1996 Nolhcdwetpn Tho Dewf The machine can be inspected under power.

Condition: used, Year of construction: 2001, Functionality: fully functional, The lathe is in excellent condition. Lathe is PLC with inline motor the newest model. Max working diameter is 130cm Max working height is 100cm Chock is 112cm Nslhowfgzxocdw Djwf

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, Functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Power: 5.5 kW Torque: 14 Nm Nslhcewcprnodw Dewf Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Feed (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Rated force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Feed (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of stationary tools (internal): 6 Diameter: 20 mm Number of stationary tools (external): 4 Tool shank size: 12 × 12 mm Number of rotating tools: 4 Collet type: ESX 16 MACHINE DETAILS Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA On-time: 85,620 h Program run: 27,896 h EQUIPMENT - FMB Turbo 3-36 bar loader / 4200 / A, built in 2007 - Coolant tank with chip conveyor - Central lubrication system - Handheld control unit - Documentation available

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, turning length: 130 mm, spindle speed (max.): 12,000 rpm, spindle bore: 17 mm, bar passage: 13 mm, feed length X-axis: 30 mm, feed length Y-axis: 135 mm, TECHNICAL DETAILS Control: Siemens Sinumerik 840D Configuration: Dual electrospindles, dual C-axis Main spindle and moving headstock Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Spindle speed: 12,000 rpm Spindle stroke: 130 mm Counter spindle Bar capacity: Ø 13 mm Spindle bore: Ø 17 mm Electrospindle (100/60%): 2.2 / 3.7 kW Max. spindle speed: 12,000 rpm Max. workpiece length in the counter spindle: 95 mm Max. workpiece length with front ejection: 130 mm mm Tool carrier Horizontal travel (X-axis): 2 × 30 mm Vertical travel (Y-axis): 135 mm Tool holder: 1 tool carrier Outside stations: 8 stations, 12 × 12 mm Inside tools: 3, mounting bore Ø 16 mm Driven tools Number of driven tools: 3 Tool holder: ER 11 / ET 1-12 Speed (2 stations): 6,000 rpm Speed (1 station): 2,000 rpm Threading: Rigid threading Workpiece output: via counter spindle MACHINE DETAILS Machine dimensions (L × W × H): 1,830 × 950 × 1,717 mm Machine weight: 2,000 kg Cooling Coolant tank: 120 l Flow: 63 l/min Pressure: 2 bar Pneumatics Operating pressure: 6 bar Nwolowc R Ukjhcdw Dof Connection: Ø 10 mm Electrical data Supply voltage: 3 × 400 V / 50 Hz Max. power consumption: 21 kVA Cable cross-section: 10 mm² Fuses: 32 A, type AM Bar loader Standard diameter: Ø 2 – 16 mm Max. bar length: 3.2 m EQUIPMENT - FMB bar loader magazine Minimag type 3200 / 1205 A, built in 2002 - Diameter range for bar loader: Ø 2 – 13 mm - Workpiece output via counter spindle - Rigid thread cutting function - 3 driven tools - Dual C-axis with electric motors for main and counter spindle

Condition: used, Year of construction: 2019, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 15.650h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Nwelhewf D S Iscdw Dof The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: Nwelhcewfhckedw Dsf The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21. If you are interested, the machine can be demonstrated under power/chip.

Condition: like new (used), Year of construction: 2005, Cazeneuve CNC Lathe Model OPTIMAX 360 Year 2005 Turning length 610 mm Turning diameter 360 mm Bed diameter 360 mm Slide diameter 200 mm Center distance 610 mm X axis 180 mm Z axis 610 mm Spindle nose MT 6 Spindle bore 54 mm Number of turrets - 1 Number of tools - 8 VDI 20 turret Selection of turning tools 16 x 16 mm Boring bar diameter 25 mm Rotation speed 4200 rpm Nwslhcswb Uk Hedw Dsf Spindle motor capacity 7.5 kW Dimensions: 1950 x 1320 x 1640 mm Weight 2100 kg

Condition: like new (used), Year of construction: 2023, operating hours: 320 h, Commissioning in 2024 prepared for emulsion removal of long parts main spindle extension Ø 23 mm max. headstock stroke 205 mm max. speed 8,000 rpm 6-way turning tool holder on linear slide 4-way drilling unit including drilling fixtures (front/rear) 4 driven tools for cross machining on linear slide 4 tools including drilling fixtures for rear machining with drive speed of driven tools 8,000 rpm speed of counter spindle 9,000 rpm Nelsupi Hcjhcdw Dewf 7 axes bar loader IEMCA BOSS 338/32 HD

Condition: used, Year of construction: 2004, Max. machining dia. 20 mm Max. machining length 200 mm Max. spindle speed 200-10.000 rpm Spindle bore 24 mm Max. spindle speed (back spindle) 10.000 rpm Main spindle indexing 1 degree. No. of axis 8 pcs. Control: Mitsubishi/Meld 635 LC Equipped with: 6 pcs. rotary tools Magazine bar feeder Chip conceyor Nwolhcdov Efppsw Dof No tool holders comes along

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 81154, turning length: 600 mm, turning diameter over cross slide: 300 mm, spindle speed (max.): 4,000 rpm, turning diameter: 360 mm, bar passage: 60 mm, TECHNICAL DETAILS Control: Siemens 840D Machining area Bar capacity: Ø 60 mm Spindle bore: Ø 66 mm Turning diameter (effective): 300 mm Permissible turning diameter: 360 mm Turning length: 600 mm Center distance: 870 mm Spindle Spindle mount: ISO-A6 Speed range: 0 – 4,000 rpm Power: 15 kW (S1) Tool turret Turret system: Baruffaldi VDI Tool stations: 12 Driven tools: 6 Travel paths X-axis travel: 190 mm Z-axis travel: 650 mm Rapid traverse speed X/Z: 18 m/min Tailstock Tailstock movement: manual via keystroke or M-code Condition and Special features Filter system: Mist extraction currently out of service Nslhcdwjwc Sa Ue Dswf EQUIPMENT - LNS Super Hydrobar hydraulic bar loader (Swiss made) - SMW-AUTOBLOK chuck type 210HYN-S - Tool package with clamping jaws and VDI tool holders - Turret with 6 driven tools - Programmable tailstock control

Condition: used, Year of construction: 2021, number of spindles 8 bar capacity 36 mm control FANUC 30i-B Subspindle speed 7.500 U/min Bar Automatic Lathe - Multi Spindle | DMG GILDEMEISTER - MULTISPRINT 36 equipped with bar feeder and a coolant system. The machine only has 6.944h spindle hours. The machine is in a well-maintained condition and can be inspected under power. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. The machine works with a EGS loading system -> This can be purchased separately An extensive tool package is included. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Nslhcswf D Szsdw Djwf #Tags: MULTISPRINT36 | MULTISPRINT-36

Condition: used, Year of construction: 2005, control SIEMENS 840 D max. workpiece weight 3000 kg max. workpiece diameter 2000 mm max. workpiece height 1000 mm total power requirement 153 kVA Universal machining center for turning, drilling and milling operations Travel distance: - Number of NC axes 5 - X-axis 2000 mm - Y-axis 2300 mm - Z-axis 1000 mm - Rapid traverse X- Y- Z-axis 30 m/min - Number of tool magazine positions 210 Pallet changer: - three pallets in the system Pallet diameter: - 2 x Ø1250 mm - 1 x Ø1600 mm - Turning spindle speed range 1 - 400 1/min - Drive power of turning spindle 70 kW - Speed range drilling- milling spindle 1- 12000 1/min - Drive power drilling/milling spindle 40 kW Njlhcdwjvylixe Dewf Equipment / accessories: - 3x face plates, diameter 2x 1250 mm and 1x 1600 mm - Various drilling and milling heads - 1x measuring probe

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Nwelhcjwf Acledw Djf Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Transformer Operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: good (used), Year of construction: 2006, Ref. -No.: 10402 Manufacturer: GILDEMEISTER Type: Gildemeister GMC 35 ISM Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840D PowerLine Storage location: Halberstadt Country of origin: Germany Machine-No.: 5702-0027 work spindles: 6 Turning Speeds: 6300 RPM C-Axis: Ausricht- und Schalteinrichtung Spindle passage: 32 mm Spindle power: 6 x 4 kW Capacity At 100% Load: 6 x 4 kW Max. Torque: 6 x 15 Nm Rapid Travel Speed X-Axis: 12 m / min Rapid Travel Speed Z-Axis: 12 m / min Travel -X Axis: 68/100 mm Travel -Z Axis: 68/100 mm Machine length: 7000 mm Machine width: 1800 mm Machine Height: 2400 mm Connected Load: 107 kVA Further information: Features: 5 cross slides for machining in X and Z Pick-up spindle freely programmable in position 6 Nwolhcdswfyy Iow Def 5 front spindles of which 5 can be driven 4 U-axes electrically prepared 1 axis for back machining on the pick-up spindle Kraft and Bauer CO² fire extinguishing system Hinged belt chip conveyor Artis tool breakage control Tool carrier: Number: 12 Axes X/Z: 68/100 mm Rapid traverse X/Z: 12 m/min Tools for backworking: 1 Bar loading magazine: IEMCA Sir 36P; type 33 F Year of manufacture 2006 Serial number 020440MA04 Bar length 3000mm Knoll high pressure system AE1114: Year of construction 2006 Filter system Pumps 5Bar and 40Bar individually adjustable for the processing steps Heat plate exchanger Lifting pump from the chip conveyor Machine is in operation under power and can be inspected by appointment.

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Njlhsvbb U Hjcdw Dewf Further data see data sheets Machine documentation available .

Condition: reconditioned (used), Year of construction: 2011, Functionality: fully functional, turning length: 320 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, overall weight: 3,500 kg, Equipment: rotational speed infinitely variable, Citizen M32-3M5, very good condition, machine partially overhauled - All servo axis amplifiers replaced - Spindle bearings completely replaced - X2 slides re-scraped - Z2 guideways replaced - Geometry completely adjusted - Complete cleaning performed Njlhswdrp Sjcdw Dswf Number of tool stations on turret: 12 Number of servo axes: 8 (Z1/X1/Y1/X2/Z2/Y2/Z3/X3) Y-axis on the turret Part removal unit Including FMB Turbo 3-36 bar loading magazine Including Müller Combi Stream chip conveyor/high-pressure combo system Including Kraft and Bauer fire extinguishing system Including 10 driven tool holders and 10 tool holders for the turret 1-year warranty on the replaced components Delivery and commissioning on-site available upon request

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. Nwslhcjvp Shgjdw Dsf The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125