Used CNC lathes 400-449mm turning diameter for sale (101)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 762 mm, turning length: 863 mm, turning diameter: 431 mm, spindle speed (max.): 3,400 rpm, overall weight: 7,250 kg, chuck outer diameter: 254 mm, Haas SL-30 THE Year 2008 Control Haas Chuck 10” Turning Length 863 mm Turning Ø 431mm Ø above the bed 762 mm Turret 12 station Speed 3400 rpm Length x width x height 4500 x 2300 x 2000 Weight 7250 kg Dcjdpewbd Hqefx Aa Hol

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3075419, spindle speed (max.): 2,400 rpm, travel distance X-axis: 432 mm, travel distance Z-axis: 1,118 mm, swing diameter over cross slide: 635 mm, turning diameter over bed slide: 1,016 mm, For sale is a HAAS SL-40HE CNC turning center, manufactured in 2006, in a High-Center configuration with a full C-axis and driven tools. This robust CNC turning machine is suitable for demanding turning and milling operations. TECHNICAL DETAILS Travel in X-axis: 432 mm Travel in Z-axis: 1,118 mm Spindle speed max.: 2,400 rpm Dcsdpfjzy Npfsx Aa Hsl Swinging diameter over bed: 1,016 mm Swinging diameter over cross slide: 635 mm Bar capacity max.: 101.6 mm C-axis: full C-axis Spindle power: 29.8 kW / 40 hp Spindle nose: A2-8 Spindle bore: approx. 116.8 mm Gearbox: 2-speed Turret capacity: 10 stations Driven tools: yes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 5,500 x 2,300 x 2,300 mm Machine weight approx.: 11,000 kg

Condition: used, XYZ Proturn 410 CNC/Manual Lathe with Proto Trak LX3 Control, Chuck Size 250mm Diameter, Swing Over Bed 460mm, Distance between Centres 1200mm, Gap Bed, Spindle Speeds 15 - 2500rpm. S/No. 304 Dodpjzy N Syefx Aa Hecl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: used, XYZ 2400 Gap Bed Centre Lathe with Acu-rite 2 Axis DRO, 315mm 3 Jaw Chuck, Swing Over Bed 660mm Diameter, Distance between Centres 2400mm, Spindle Speeds 30 - 1500rpm, 2 Position QCTP, 710mm Diameter Face Plate, Steady Dcsdpfxszy N Rce Aa Hjl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: like new (used), Year of construction: 2021, operating hours: 4,393 h, functionality: fully functional, machine/vehicle number: S4E213351, turning diameter over cross slide: 300 mm, turning length: 670 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, spindle motor power: 13,000 W, total height: 1,960 mm, total length: 2,575 mm, total width: 1,760 mm, overall weight: 3,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, NEW: EMCO EMCOTURN E45 (Year 2021) CNC Lathe – FANUC 0i-TF, 4,393 hours, like new condition! Includes a parts collection device for the removal of finished parts. • Manufacturer: EMCO (Made in Austria) • Model: EMCOTURN E45 • Year of Manufacture: 2021 • Serial Number: S4E213351 • Control: FANUC 0i-TF incl. handwheel • Operating Hours: 4,393 hours (see image 263.599 minutes = 4,393 hours) • Machine Type: Single-spindle lathe with parts collection device • Number of Tool Positions: 12-position VDI-30 axial turret with two hole patterns • Condition: Like new, fully functional • Location: Graz • Availability: Immediately available from stock • PICTURES/VIDEOS: Additional pictures and videos of the running machine will be provided upon request. _____ Item Description For sale is a high-precision CNC turning center, the EMCO EMCOTURN E45, manufactured in 2021, with low operating hours of only 4,393, and in very good condition. Special features: • Control: Modern FANUC 0i-TF control for easy programming, including handwheel Dsdpfx Aezkhuhsa Hscl • Parts collection device: The parts collection device (parts catcher) of the EMCO EMCOTURN E45 CNC lathe gently transports finished workpieces out of the working area and automatically drops them into a finished parts container. • Powerful main drive: Single-spindle configuration with a substantial 13 kW drive power and a maximum speed of 6,300 rpm. • Tool changer: Fast 12-position axial turret (VDI 30) with a turret indexing time of only 0.14 seconds. • Quality components: High-quality, robust control cabinet from RITTAL for maximum reliability of the electronics. _____ Technical Data: Working area and travels: • Swinging diameter over bed: 430 mm • Swinging diameter over cross slide: 300 mm • Distance between centers: 670 mm • Max. turning diameter with axial turret: 220 mm • Max. part length: 480 mm • Max. bar diameter: Ø 45 mm • Slide travels (X / Z): 160 / 510 mm Main spindle and drive: • Speed range: 0 – 6,300 rpm • Drive power, main spindle: 13 kW • Torque at the spindle: 78 Nm • Spindle connection: DIN 55026 KK 5 • Spindle bearing (inner diameter) / Spindle bore: 80 mm / 53 mm Tool turret (axial VDI 30): • Number of tool positions: 12-position VDI-30 axial turret with two hole patterns • Tool shank according to VDI (DIN 69880): VDI 30 • Tool cross-section for square tools: 20 x 20 mm • Shank diameter for drill rods: Ø 32 mm • Turret indexing time: 0.14 sec Feed drives and accuracy: • Rapid traverse rate (X / Z): 24 / 30 m/min • Feed force (X / Z): 4,000 N / 6,000 N • Acceleration time from 0 to rapid traverse (X / Z): 0.1 sec • Positional accuracy according to VDI 3441 (X / Z): 2 / 2 µm _____ Scope of supply & terms of sale: • CNC lathe EMCO EMCOTURN E45 • Tools: The tools shown in the pictures are included. • FANUC operating manuals and machine documentation • Loading by forklift on site is included. The machine is immediately available and can be viewed and tested under power after prior appointment. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year: 2023 • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Y-axis: +/- 60 mm Sauter 12-position BMT turret counter-spindle bar feeder Dsdey Nzc Ejpfx Aa Hscl complete specifications in PDF file

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65377, turning diameter over cross slide: 432 mm, turning length: 864 mm, turning diameter: 762 mm, spindle bore: 88 mm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, spindle motor power: 22,000 W, rotational speed (max.): 3,400 rpm, total height: 1,880 mm, total length: 3,800 mm, total width: 1,955 mm, overall weight: 7,250 kg, Equipment: rotational speed infinitely variable, The machine its "as new" Only 3000Hours CNC Controller HAAS Driven tools Turningdiameter 432mm Swing over bed 762mm Turninglenght 864mm Dedpfx Aozxqx Eea Hecl Bar diameter 76mm Spindle bor 88mm 12 pos turret VDI 40 Chip convyer Tool presetter

Condition: used, Year of construction: 2013, XYZ Proturn SLX1630 CNC/Manual Lathe. S/No. 16-P-10008-095 (2013) with Proto Trak SLX Control, 200mm Diameter 3 Jaw Chuck, Swing Over Bed 440mm Diameter, Distance between Centres 700mm, 3 Position QCTP, Spindle Speeds to 2500rpm Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dedpfszy N I Uex Aa Hocl

Condition: ready for operation (used), Year of construction: 2009, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: AT0286, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 4,000 mm, travel distance X-axis: 275 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, overall weight: 5,000 kg, Equipment: documentation/manual, SPINNER TC600-65 SMCY Year of manufacture: 2009 We offer for sale a high-quality SPINNER TC600-65 SMCY CNC turning center. The machine is in good technical condition and can be inspected under power by arrangement. - Siemens 840D control system Dodpfozux R Uex Aa Hecl - Tailstock - Y-axis - Chip conveyor - Bar feeder interface - Tool probe - VDI30 turret (all stations powered) - Chucks - Tool holders - High-pressure coolant system

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52000901-01, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, type of input current: AC, overall weight: 3,300 kg, Equipment: documentation/manual, CNC lathe in very good condition for sale. Turret head with 8 tool positions. Hydraulic chuck D160 with numerous spare jaws. Dcedjzxy Ngepfx Aa Hjl Complete documentation is available. For further information or videos, please contact me privately!

Condition: used, Year of construction: 2020, Doosan Puma GT2600M Fanuc control Dsdpfozw Dyaex Aa Hecl Year 2020 Powered tools, C-axis Z-axis 680mm X-axis 265mm Max. diameter 410mm Max. turning length 610mm Chuck 250mm Spindle bore 81mm 12-position BMT 55 turret Tailstock Tool probe Chip conveyor Documentation 11 tools, including 1 powered tool

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Djdpfxezux Iye Aa Hocl Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Type of control: CNC-Steuerung Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Dedpfx Aaezx Nx Rj Hscl Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2017, control Heidenhain CNC-Pilot 640 turning length 500 mm spindle tunring speed 5.000 U/min drive capacity - main spindle 100/40% ED 25/34 kW tool taper VDI 30 number of tool places 16 Pos. Number of working hours ca. 29.259 h spindle hours ca. 7.351 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dcjdpfx Ajzyvcfea Hjl Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping unit (Ø 77 mm) - Differential pressure clamping for the main spindle - 16-station disc turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter system (40 µm filtration fineness) - Level monitoring - Connection port for oil mist extractor - Coolant spray gun - TurnPlus Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: used, Year of construction: 2006, operating hours: 29,199 h, functionality: fully functional, machine/vehicle number: AK0272, Equipment: documentation/manual, - Year of manufacture: 2006 - Fully functional, powered on, ready for demonstration - With driven tools - With sub spindle - Siemens 840 D control - Incl. chip conveyor - Swing diameter over bed: 685 mm - Centre distance: 526 mm - Travel paths: X 240 mm / Z 640 mm / B 520 mm - Rapid traverses (X, Z, B): 18 / 24 / 24 m/min Dsdpfx Aaoxgryms Hocl Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79248 Machine Serial Number: STA00197 £29,950.00 + VAT Djdjzkbiropfx Aa Hjcl Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2020, DOOSAN PUMA 3100LY Dedpfx Aajzc Nzno Hjcl FANUC control YEAR OF MANUFACTURE: 2020.11 Chuck size: 12 inches Max. turning diameter: 420 mm Max. turning length: 1285 mm Bar diameter: 102 mm Z-axis travel: 1350 mm Y-axis travel: 130 mm X-axis travel: 293 mm TAILSTOCK Live center: SMW AUTOBLOCK - Chip conveyor included - Documentation

Condition: like new (used), Year of construction: 2019, Smec Revolver, unused, BMT 55. Dcedpfjzw Uz Iex Aa Hel

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Djdpfezacwdex Aa Hscl Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, - FANUC i Series TD - Max. turning diameter: 420 mm - Max. swing dia over bed 670–850 mm - Max. turning length 3190 mm - Spindle speed: 2800 RPM Dcedszw N H Espfx Aa Hel - Spindle motor power: 22–25 kW - Spindle bore / Chuck size: 102–132 mm / 12 inches - X-axis travel: 293 mm - Y-axis travel: ±65 mm - Z axis travel: 3190 mm - Live tool speed: 5000 rpm - Number of tool stations on the turret: 12 - Machine weight: approx. 13000 kg Accessories, features - Coolant unit - Chip conveyor - Tailstock - Hydraulic steady rest - C axis - Y axis - Live tool turret - Towel lamp - Transformer - Integrated hydraulics - 3 jaws hydraulic chuck - Tool eye (tool presetter) - Tool holders (live holders too) - Documentation The machine was owned by a sheet metal production company and the machine was barelly used. Very good condition. Under power in our showroom.

Condition: used, Year of construction: 2005, XYZ Proturn SLX 555-2M CNC/Manual Lathe. S/No. SBLG 00041 (2005) with Proto Trak SLX Control (Control Retrofitted 2019), Chuck Size 310mm Diameter, Gap Bed, Swing Over Bed 660mm Diameter, 2000mm Between Centres, 3 Position QCTP, Spindle Speeds 30 - 1800rpm Dcsdpezy N Inofx Aa Hjl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: like new (used), Year of construction: 2015, operating hours: 3,300 h, functionality: fully functional, Machine in excellent condition, like new, only 3300 hours. Machine weight 7259,5 kg Max. working length 584,2 mm Max. working diameter 406,4 mm Swing over bed 807,7 mm Axe X: 317,5 mm Axe Z: 584,0 mm Spindle boring 88,9 mm Number of tool positions 24 Speed 4800 rpm Main motor output 14,0 kW 3-jaw chuck 250mm With opposite spindle. Y axe +/- 50,6mm Dcodpfxezmu Ute Aa Hjl - live tools in all positions C axe Including automatic bar feeder - max. bar diameter 79mm - max. bar length 1520mm

Condition: new, Year of construction: 2024, operating hours: 40 h, functionality: fully functional, turning diameter over cross slide: 240 mm, turning length: 750 mm, spindle bore: 66 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 550 mm, spindle motor power: 5,500 W, rapid traverse X-axis: 210 m/min, rotational speed (max.): 3,000 rpm, total height: 1,600 mm, total length: 2,290 mm, total width: 1,340 mm, swing diameter over cross slide: 240 mm, turning diameter over bed slide: 400 mm, type of input current: three-phase, overall weight: 2,200 kg, chuck outer diameter: 250 mm, spindle nose: A2-6 DIN 55026, center height: 200 mm, Equipment: documentation/manual, rotational speed infinitely variable, CNC Lathe 400x750 Compact CNC lathe with industrial-grade performance The HC 400x750 CNC is a compact industrial lathe designed for those seeking reliable CNC performance without unnecessary complexity. This machine combines accuracy and stability with user-friendly operation and competitive pricing. Ideal for transitioning from conventional to CNC machining or as an addition to your equipment fleet. Djdpfx Aaeylhkme Hscl Features: • Siemens 828D with ShopTurn functionality • 8-position hydraulic turret • DXF converter • Siemens 5.5 kW motor • 250 mm Bison chuck • Manual tailstock • Coolant system via turret • Centralized lubrication • Siemens electronic components • X-axis ball screw • Z-axis servo motor • Spindle servo motor • Includes manuals, etc. • Teach-in function with handwheels • Showroom / Demo model Specifications: • 400 mm swing over bed • 240 mm swing over carriage • 750 mm between centers • A2-6 spindle nose (DIN55026) • 3000 RPM • 66 mm spindle bore • 210 mm X-axis travel • 550 mm Z-axis travel • 20x20 mm max. tool size • MK4 tailstock • 5.5 kW Siemens motor • 330 mm bed width • 1500 kg weight • 2290x1340x1600 mm dimensions • Year of manufacture: 2024

Condition: good (used), Year of construction: 2010, 400mm max machining diameter, 640mm max cutting length, 685mm swing, 12 Station Turret, Fanuc 32i Control, spindle motor power 25kW, 77mm diameter bar cap, Dodpjzqr N Aefx Aa Hjcl 3 jaw chuck, swarf conveyor, tool presetter, coolant,

Condition: used, Year of construction: 1960, functionality: fully functional, machine/vehicle number: 3183, Parameters: Djdpfx Aewqlc Eea Hjcl Swing over bed: 4000 mm Distance between lathe tips: 30,000 mm Speed: 0.5-80 rpm Workpiece weight: 160 t Control system: CNC SIEMENS SINUMERIK 840 D