Spindle insert tubes for all types of lathes
diameter min. : 5 mm
Diameter max. : 105 mm
Graduations: 1 mm
Ready for installation
Straightened and balanced
VDI 50 Radial tool holder
The recordings are in good condition.
Not every screw/coolant passage was checked by us for presence/function!
The shim shown in the pictures is partly not included in the delivery!
air-pressure connection: bar
max. load of measurement-plate: kg
total power requirement:
weight of the machine approx.: 5000 kg
transport dimensions LxWxH: 1,4 x 1,8 x 2,2 m
The headstock unit of the EMAG VLC series machines is characterized by short strokes, high rapid traverse rates, extreme rigidity and an integrated cooling system.
Maintenance-free, frequency-controlled three-phase motors serve as feed drives for the X and Z axes.
With quick change system !
Three jaw gripper like new
3 x in stock
Universal gripper PZN-plus, size: 240, pneumatic, with gripping force retention: AS
stroke per jaw: 30 mm
closing force: 13720 N
Tailstock with hydraulic sleeve
-mechanical crank for presetting
-Hydraulic stroke is performed via hand lever
-clamping force adjustable via pressure control valve
Type: UCP 2/20
condition: used / ready for use
from the machine dismantling of a fully functional cycle lathe
GRAZIANO SAG 210nc
swing diameter:450 mm
weight of the machine ca.:0,35 t
dimensions of the machine ca.:0,8 x 0,3 x 1,3 m
swing diameter:180- 450 mm
Height of centres:500 / 700 mm
bed width:320 / 380 mm
3 roll steady rest
retrofitted and unused
steady for heavy lathes
with coolant pump
Insertion length 2,30 m
insertion width 0,37m
Ejection height 1,6m
Width in the area of the coolant tank 1,2m
Cargo dimensions approx. LBH 4,5x1,2x1,6m,
weight approx. 200 kg
diameter: 250 mm
passage: 80 mm
width: 80 mm
weight of the machine approx.: 23 kg
dimension L-W-H: Ø 250 x 130 mm
4 jaw chuck with flange
- width of the main body 80mm
- with clamping jaws for internal /external
- flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm
Type KA 600 L
Year of manufacture approx. 2013
filter paper and filter tear off control
output fineness 30-40µm
low number of operating hours
dimensions approx. LBH 1500x1200x1800 mm
weight approx. 400 kg
diameter: 250 mm
passage: Ø 80 mm
width: 106 ohne Flansch mm
weight of the machine approx.: auf Anfrage kg
dimensions: Ø 250 x B: 140 mm
three jaw chuck made of steel
incl. chuck key
inkl. 2x 3-Backen
flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm
on Sale with or without flange!
rising about 70 pieces of 0,5-8,0 mm, 1/10 mm
Total length approx. 59 mm
Head diameter approx. 19.2 mm
Head height approx. 9 mm
Length approx 46 mm
Shank diameter 12.5 mm
Thread about 12.4 x 1.3 mm (measured)
Lenght approx. 14 mm
Collet sizes are 3 x slotted
AXA - QUICKCHANGING TURNING STEEL HOLDER ( Multifix System )
Made in Germany
Single component and set
All variants and sizes
A powerful accessory for every lathe. Highly economical due to quick tool change. Guaranteed high precision due to hardened and precision-ground teeth of the quick-change toolholder body and toolholder. With this system, many tool holders can be used in accordance with the requirements. The tool holders can be changed easily and the repetition accuracy of 0.01 m...
diameter: 310 mm
passage: Ø 98 mm
width: 110 mm
weight of the machine approx.: 47 kg
dimensions L x W x H: Ø 310 x B: 230 mm
4 jaw chuck made of steel
- pitch circle diameter Ø 133mm , with 4 bolts M12x50, flange size Ø 310 x 19mm, passage Ø 104mm
- clamping jaws - clamping area internal min. approx. Ø 5 and external max. approx. Ø 380mm, jaws ajustable idividual
in a top used condition
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.