Used cycle-controlled lathes with a turning diameter over 599 mm for sale (52)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 774 h, functionality: fully functional, machine/vehicle number: 373/02  , center width: 3,040 mm, swing diameter over cross slide: 350 mm, quill stroke: 210 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of December 1, 2026, and December 10, 2026! TECHNICAL DETAILS Center distance: 3,040 mm Diameter of swing over cross slide: 350 mm Max. diameter of swing: 650 mm Travel of cross slide: 375 mm Spindle head size: 8 Spindle diameter in the front bearing: 120 mm Material passage: max. 71 mm Chuck diameter: 250–315 mm Speed range: 2–1,800 rpm Tailstock Outer diameter of quill: 110 mm Max. quill stroke: 210 mm Internal taper: MK 6 MACHINE DETAILS Operating voltage: 400 V Frequency: 50 Hz Rated current: 63 A Connected power: 41 kVA Control: SIEMENS Bedps Ahn Hkjfx Afmjww Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,000 x 2,000 mm Weight: 6,000 kg Recorded operating hours: 774 h EQUIPMENT Tailstock Multifix tool holder 3-jaw chuck FORKARDT, diameter: 300 mm 2 steady rests Additional Multifix tool holder Various centers Various tapers Tool holders Turning tool holders Milling cutters Jaws Documentation External reference: Frankenthal - Lot 366

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0166, spindle bore: 105 mm, quill stroke: 300 mm, spindle speed (min.): 26 rpm, spindle speed (max.): 2,000 rpm, total length: 4,700 mm, total width: 2,260 mm, total height: 2,260 mm, type of input current: AC, overall weight: 4,800 kg, distance between centers: 2,000 mm, number of tool stations in tool turret 3: 8, Cycle-controlled turning machine with Fagor 8055i control Model: UT 660x2000 Turning diameter over bed 660 mm Turning diameter over carriage 460 mm Turning diameter in the bed bridge 960 mm Distance between centers 2000 mm Maximum turning length 1650 mm Headstock Spindle bore 105 mm Spindle head Camlock D1-11 DIN 55029 Spindle taper MK8 with reducing sleeve MK6 Spindle speeds (3 ranges, stepless) Low 26 – 224 rpm Medium 225 – 670 rpm High 671 – 2000 rpm Drive nN = 1500 rpm / NN = 96 Nm / IN = 34 A (50 Hz) Tailstock Quill stroke 300 mm Quill diameter 105 mm Taper quill MK6 Saddle Longitudinal travel (Z-axis) 1700 mm Z – Rapid traverse 6 m/min Z – Feed rate 1 – 3000 mm/min Z – Drive nN = 3000 rpm / NN = 14.5 Nm / IN = 8.5 A (50 Hz) X – Rapid traverse 6 m/min X – Feed rate 0.5 – 3000 mm/min X – Drive nN = 3000 rpm / NN = 6.0 Nm / IN = 4 A (50 Hz) Turret (8 tool stations) Tool holder VDI (8x) Coolant pump Coolant pump tank volume = 115 l Lubrication unit Pump (lubrication for Z+X saddles) Tank volume = 2 l Machine bed Machine bed width 480 mm Max. turning length 1650 mm Power 39.3 A Power 24 kW Mechanical data Overall length 4700 mm Overall width 2250 mm Overall height 2260 mm Net weight 4800 kg Gross weight 5500 kg Bodps Agcnnofx Afmjww All of the above technical data are for reference only. Control type CNC Condition Used Year of manufacture 2013 Machine is powered Yes Weight 4800 kg Width 4.7 m Height 2.26 m Depth 2.25 m This offer is exclusively aimed at entrepreneurs within the meaning of § 14 BGB. No returns on used goods! No warranty.

Condition: used, Year of construction: 2016, POWER: 15 kVA SPINDLE SPEED: 8,000 RPM TOOL HOLDER: BT40 TRAVEL: 760 mm x 430 mm x 510 mm Tool magazine: 24 positions Chip conveyor with collection tank Bwjdpj Adtlpsfx Afmew Coolant system with high-pressure pump (external unit with additional motor, visible)

Condition: good (used), Year of construction: 2005, cycle controlled lathe Machine type: Seiger SLZ 700 x 2000 Control: Heidenhain Year: 2005 Available after: sofort / now SPECIFICATIONS Bed width: 480 mm Max. turning length: 2.000 mm Turningdiameter: 730 mm Umlaufdurchmesser ü. Planschieber / Swing diameter over Face slide: 450 mm Amount of turrets: 1 Bwjdpfx Aj Afm D Uofmsw Tool: Capto C6 mit WTO (Angetriebene WKZ) Axial – Radial ! Equipment Chip conveyor Steady rest: Ø50 - 300mm Steady rest: mitlaufende 3-jaw chuck: Rota S+ 500-162 Keilstangenfutter mm Bohrstangenhalter

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,065 mm, Control system: Siemens 828 D Drive spindle Speed: 4,000 rpm Power: 9 kW Maximum torque: 110 Nm Chuck diameter: 210 mm Spindle bore: 53 mm Spindle nose: A2-5'' Working area Distance between centers: 1,000 mm Center height: 240 mm Swing over bed: 470 mm Swing over compound slide: 200 mm Swing over cross slide: 430 mm Z-axis travel: 1,065 mm X-axis travel: 220 mm Tool system Turret: PARAT 4-position turret head RD 2 Tailstock Technology: Follow-type Centering point: MK-4 (rotating) Steady rest Technology: Traveling Diameter range: 12 mm - 50 mm Equipment Chip management: Chip tray Bwsdpfxezrghvs Afmow Coolant supply: Coolant pump, 7 bar Additional feature: Adapter plate PARAT RD-2 with internal cooling Chuck: SMW wedge-type chuck (D = 210 mm) Jaw set: 1 set of hardened jaws Footprint (L x W): 2.91 m x 1.24 m

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 030536, turning length: 2,000 mm, center width: 2,000 mm, center height: 330 mm, spindle speed (max.): 2,500 rpm, spindle motor power: 18,500 W, The Saeilo Contur Dialog H 66/2000 is a used cycle lathe, manufactured in 2004 (first commissioning 02/2004), equipped with a Siemens Sinumerik 810D control system. With a center height of 330 mm and a center distance of 2,000 mm, it is designed for longer shafts that are machined individually or in small batches. It can be operated manually or programmed for cycle operation. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2004 - Control system: Siemens Sinumerik 810D - Center height: 330 mm - Center distance / turning length: 2,000 mm - Swing diameter over slide: 400 mm - Spindle speed max.: 2,500 rpm - Spindle drive: 18.5 kW EQUIPMENT AND ACCESSORIES - Chip conveyor Saeilo TTM-325 (hinged belt) - Turning chuck - Turning and clamping tools - Setup tools - Operating manual Contur Dialog H 56/66/66G Bsdpfjz H Ugaox Afmjww CONDITION During our inspection on 01.10.2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, spindles, and tube parts up to 2 m in length in the tool and maintenance sector, where many individual parts are required. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact details for freight forwarders in the region. Price on request. Please contact us via the contact form.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, A used VDF BOEHRINGER DUS 800 lathe. Turning length 2000-3000 mm. Includes accessories. Bsdpfjz H N Hzex Afmeww

Condition: used, Year of construction: 1997, turning length 1500 mm greates pass round over bed 490 mm turning dia. over face-slide 280 mm control Heidenhain Manual Plus Speed range - up to 3000 U/min spindle bore 65 mm power capacity - workpiece power 12/16 (100/60%) kW weight of the machine ca. 3,5 t Equipment/Accessories: Bedpfx Aey Ty Egsfmsww - Steady rest - Chuck - Tool holders - Drill bits - Tips - Multifix holder

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Bodpfo Ahkuvex Afmeww Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 2014, turning diameter over bed 600 mm turning diameter over slide rest 400 mm turning length 2000 mm hollow 82 mm turning diameter 600 mm turning dia. in gap 800 mm length of gap 400 mm turning speeds 2000 U/min 3-jaw chuck 250 mm steady 210 mm with live steady 200 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Bjdpfx Aoyqv Rxofmsww More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2007, 1 used, very well-maintained high-performance cycle turning machine with FAGOR 8055 TC-A, 8-position tool turret BARUFFALDI VDI 40, pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, constant cutting speed, 1 large steady rest, and articulated chip conveyor. Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 26160X Year of manufacture: 2007 Technical data: Center height: 350 mm Distance between centers: 4000 mm Swinging diameter over bed: 690 mm Swinging diameter over cross slide: approx. 420 mm Swinging diameter in the gap: 870 mm Spindle speeds: 0 – 2400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Machine dimensions + chip conveyor L x W x H: 7350 x 2450 x 2050 mm Machine weight: 6,800 kg Accessories / special features: • Cycle control FAGOR CNC 8055 TC-A with alphanumeric keyboard o LCD color monitor o Graphical simulation of the cycles o 2 electronic handwheels • Pneumatic 3-jaw front chuck SCHUNK ROTA TP 315-105, Ø 315 mm • 8-position tool turret BARUFFALDI TB 160-8/12, VDI 40 • Articulated chip conveyor • 1 unused fixed steady rest with rollers, inner diameter approx. 380 mm Bsdpfx Aezfqdnsfmsww • Automatic lubrication of the headstock • Automatic lubrication of the longitudinal and cross slides • Tailstock with hydraulically actuated quill • Coolant system • CE compliant New FAGOR servo controller for main spindle control, repair costs €4,950.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1999, turning diameter 800 mm turning length 2000 mm control MONFORTS control Control System MTC-K centre height 400 mm centre distance 1970 mm swing over bed 830 mm swing diameter over slide rest 540 mm spindle bore 135 mm face slide travel 450 mm spindle turning speed range 2 - 1600 U/min transmission ratio 4 feed power X/Z axis 11,3 / 23,9 kN rapid traverse X-axis 4 m/min rapid traverse Z-axis 6,8 m/min Bedpfj Adu S Dox Afmeww tailstock quill diameter 125 mm tailstock quill stroke 200 mm tailstock taper MT 6 total power requirement 53 kVA weight of the machine ca. 6 t dimensions of machine L x W x H 4,35 x 2,17 x 2,10 m Accessories: 3-jaw chuck 630 mmø, MULTIFIX head "D", various tool holders, chip conveyor, coolant

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard Bjdpfxoyy Nlpo Afmoww o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1998, turning length 2000 mm 980507 x-axis 7000 mm z-axis 10000 mm 65 mm total power requirement 15 kW weight of the machine ca. 3,5 t Bwedpjw Syb Dofx Afmew

Condition: used, Year of construction: 2010, turning diameter 475 mm turning length 1500 mm control Fagor 8055T Revolver 8 turning diameter over slide 240 mm turning dia. in gap 710 mm length of gap 350 mm spindle passage 51 mm turning speeds 100-4500 U/min Power 7/11 KW 3-jaw chuck 250 mm steady 230 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale Bwedpeyqv S Nofx Afmow apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2014, functionality: fully functional, Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control system: Siemens Sinumerik 840 Bwsdey R Rl Eepfx Afmjw Year of manufacture: 2014 Internal machine no.: 57 Turning length: 1,000 mm Turning diameter over bed / cross slide: 420 / 235 mm Cross slide travel: 250 mm Max. speed: 10 – 3,000 rpm Accessories - Steady rest - Extraction unit - 3-jaw chuck Schunk 250-62 - Tool holder

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control SIEMENS - 840 D turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti Bodszaf Hnspfx Afmjww

Condition: used, Year of construction: 2001, CNC lathe Manufacturer: Weiler Bjdpfszt S Ttjx Afmeww Type: E70 Year of manufacture: 2001 Control: Weiler cycle control D2 Operating hours: 68,950 Distance between centers: 2000 mm Height between centers: 360 mm Max. chuck diameter: 400 mm Max. diameter over bed: 720 mm Max. diameter over cross slide: 430 mm Max. diameter over tool rest: 780 mm Length of tool rest: 160 mm Max. workpiece weight: 3,800 kg Spindle bore: 106 mm Spindle head: Size 11 Quick-change tool holder: Parat 4-position turret Dimensions: 4,030 x 2,443 x 1,900 mm Weight: 5,200 kg Available immediately 31126ä

Condition: good (used), Year of construction: 2007, cycle controlled lathe Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Bwsdpfxszizd To Afmew Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end Bedpsw Sm U Dofx Afmeww - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: used, Year of construction: 2008, turning diameter 890 mm turning length 3000 mm turning diameter over slide rest 550 mm control Fagor 8055i ATC Revolver 8 tail stock MK 6 turning dia. in gap 1220 mm length of gap 450 mm Bsdpfxeyqwauo Afmeww spindle passage 106 mm turning speeds 15-1480 U/min 3-jaw chuck 400 mm steady 300 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT Bwjdpfx Asxxig Usfmsw 1 fixed steady coolant attachment and chip conveyor *

Condition: used, Year of construction: 2006, turning diameter 550 mm turning length 3100 mm control Fagor 8055T turning diameter over slide 310 mm turning dia. in gap 790 mm length of gap 283 mm spindle passage 51 mm turning speeds 80-3500 U/min Power 15 KW 3-jaw chuck 250 mm steady 220 mm workpiece weight 2000 kg The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Bwodpfx Afjyuqgvomsw About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2011, Centre height: 330 mm Swing over bed: 660 mm Swing over cross slide: 430 mm Distance between centers: 1500 mm Bed width: 400 mm Spindle mount DIN 55029: A 8 Spindle bore: 82 mm Speed range, 3 steps: 7 – 135, 30 – 550, 110 – 2200 rpm Feed rate X/Z: 3000 / 6000 mm/min Rapid traverse X/Z: 4 / 8 m/min Tailstock quill taper: MK 5 Drive power: approx. 9 kW Dimensions (L x W x H): 3450 x 1750 x 1770 mm Weight: 2850 kg Bwedpfx Afjl D Rddomow Equipment / Special features: • Cycle control FAGOR 8055-i A TC with TFT color display • Electronic handwheels • Interface • 4-position tool turret, programmable change via motorized drive • 3-jaw chuck, make BISON, diameter 300 mm • Full enclosure, sliding doors with electric safety interlock • Coolant system • Air-conditioning for the control cabinet • Central lubrication • Machine feet • Lighting • CE conformity Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor Bjdpfszdd E Rox Afmoww 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No