Used precision turning lathes for sale (47)

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine/vehicle number: BL278700, center height: 150 mm, turning diameter over cross slide: 177 mm, spindle bore: 40 mm, turning diameter: 340 mm, spindle nose: Camlock D 1-4, type of input current: three-phase, total length: 1,730 mm, total height: 1,300 mm, total width: 970 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, empty load weight: 1,250 kg, overall weight: 1,250 kg, For sale is a Schaublin 150 precision lathe from Switzerland. It is considered one of the best conventional lathes ever built. The machine has been overhauled. The spindle has been fitted with new bearings. The bearing set was ordered directly from Schaublin. The slides have been scraped. Turning tests with 30mm round steel resulted in a cylindricity of 0.002mm over 200mm. A large amount of accessories is included with the machine: - Reishauer 3-jaw chuck, 2x - Original Multifix B Mivesa tool holder - Collet chuck with lever clamp - Schaublin B32 collet set, 2 to 28mm, complete in 0.5mm increments, with MK5/B32 reducing sleeve and draw tube. - Steady rests - Machine documentation with catalog - Complete standard set of change gears, plus special gears - Conventional tool holder from Schaublin - Fixed and live center - Albrecht drill chuck - Coolant system - Digital readout The machine has not been used extensively in recent years and was only used sporadically. Extremely robust construction, suitable for hard turning. Center height: 150mm Distance between centers: 630mm Spindle bore: Ø40mm Spindle speed, continuously variable: 55-3,000 rpm Feed rate: 0.05-0.35 mm/rev Spindle taper: MK5 Tailstock taper: MK3 Isdpfey Uqx Hsx Amljif Swinging diameter over cross slide: Ø177mm Swinging diameter over bed: Ø340mm Motor: 4.5kW Dimensions: 1,730x970x1,300mm Weight: 1250kg The machine can be inspected and tested under power by arrangement in 5023 Salzburg.

Condition: excellent (used), Year of construction: 1959, Schaublin 102 VM In very good condition. Iiodezp Uz Sjpfx Amlef Includes accessories as shown in the pictures. Transportation can be arranged.

Condition: good (used), Year of construction: 2005, Turning machine SCHERER FEINBAU PM1-CNC, machine no. 65101, year of manufacture 2005, power requirement 4 kVA, weight 420 kg, with oil filtration system CLEANMIST CM500. Iijdpfx Amsztc Eajlef

Condition: good (used), functionality: fully functional, Type PM1-F-Z, data: Center height: 110 mm Center distance: 160 mm Spindle bore: 23 mm Iiodsztknijpfx Amlof 3 right-hand speeds and 3 left-hand speeds approx. 670 / 1140 / 2840 rpm

Condition: used, Needs some attention and a new fan belt, otherwise it's in good condition. Accessories are shown in the photo. Isdpfezicgijx Amloif

Condition: excellent (used), functionality: fully functional, 1 x Tailstock lathe Precision engineering Isdpfx Aezl Dr Eomleif PM 1-FZ Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Maximum diameter over bed: 220 mm Accessories: 20 x Draw-in collets 359 E K 23 (1 - 20 mm/ 1 mm increment) 1 x Draw-in collet in tailstock 319 E K 12 1 x Tripan tool holder with 1 cassette Operating manual (copy) Additional accessories, such as collets, are available at an extra charge. The machine can be inspected while powered on.

Condition: good (used), SCHAUBLIN 102 lathe, serial number 258639, securely mounted on a workbench (wooden work surface, metal frame, drawer, hinged door, 2 shelves), belt drive. Iodsztc Ubspfx Amleif

Condition: good (used), Lathe SCHAUBLIN 102N80, serial number 277444. Iodsztc Dvspfx Amleif

Condition: excellent (used), Year of construction: 2018, Maximum workpiece diameter 285mm, maximum workpiece length 280mm, Iisdpfx Aowb A Hcomlsf Bar capacity 38mm, X axis stroke 480mm, Z axis stroke 285mm, spindle speed 6,000 rpm, power 5.5Kw, swarf conveyor.

Condition: good (used), SCHAUBLIN 102 lathe, serial number 215617. Iodpfeztc Dpex Amljif

Condition: good (used), SCHAUBLIN 70 lathe Iedpfxoztcz Ue Amljif

Condition: good (used), Year of construction: 1982, functionality: fully functional, Precision high-speed lathe make FEINBAU Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . .. Ongoing purchase of used German machines without NC or CNC control . Iodpfx Amezp Uw Hjlsif

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Iijdpew N Rh Aofx Amlsf Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: excellent (used), functionality: fully functional, Schaublin 102N precision lathe. Benchtop model. In good condition, fully functional. Distance between centers: 450 mm Center height: 102 mm Spindle: W20 Swinging diameter over cross slide: 120 mm and over bed: 200 mm Tailstock quill: MK2 Connection: 50 Hz, 3 x 380 volts. Iisdpfx Amjziq Dpolof

Condition: good (used), Year of construction: 1998, functionality: fully functional, Schaublin 102 N, Machine number BL 329218, Year of manufacture approx. 1998, Center height 102 mm, Distance between centers 375 mm, Max. turning diameter over bed 200 mm, Max. turning diameter over slide 120 mm, Spindle speed up to 2,800 rpm, Isdpfozlcz Eex Amlsif Tailstock, Accessories.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Iisdpezlc Apofx Amljf Accessories,

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Iisdozmm Dgepfx Amlof

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle power : 2.2 / 3.7 [kW] - Spindle speeds : 8000 [rpm] - Max. turning diameter : 60 x 60 [mm] UPPER RIGHT TURRET - X/Z stroke : 300 x 285 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2422 x 1957 [mm] - Machine height : 2430 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : DMG MORI COMPACT LINE (Fanuc 0i-TF) - Electronic handwheel - Coolant tank - Parts catcher - Workpiece loading robot Iiodpfxjwdad De Amljf - Electric transformer

Condition: excellent (used), For sale is a set of steady rests for a Schaublin 150 lathe. Very good condition. Includes a set of 3 roller jaws. Price is for the complete set. Shipping available or collection in 5023 Salzburg. Ijdpsy Rdaisfx Amlsif

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm 3 speeds for clockwise rotation Iedpfx Aozl Ew Njmleif and 3 speeds for anti-clockwise rotation

Condition: good (used), functionality: fully functional, Technical data: Centre height 110 mm Centre width 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed can be set via potentiometer from approx. 100 - 2,300 rpm 3 pre-selected speeds or 3 switching levels . Scope of delivery, machine with: Operating modes: Manual + automatic Pneumatic clamping device Tilt tailstock with 2 sleeves for K 12 collets, with control switch for switching Ijdpfx Amsznc Tyoljif Hand lever cross support with 4 stops, consisting of cross and longitudinal support .

Condition: used, CNC lathe KUMMER K250 LSK Iiodpfxjwdafue Amlof

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - Max. turning diameter : 50 x 40 [mm] UPPER RIGHT TURRET - X/Z stroke : 220 x 220 [mm] Iisdjwdad Ropfx Amljf - Rapid traverse rate : 15 [m/min] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1880 x 1390 [mm] - Machine height : 1600 [mm] - Machine weight : 1600 [kg] MACHINE HOURS - Number of working hours : 18941 [h] EQUIPMENT - CNC : Fanuc 21i-TD - Coolant tank - Parts catcher - Loading cell - Electric transformer

Condition: used, TECHNICAL DETAILS Ijdpfx Aewdafbemleif - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - Max. turning diameter : 60 x 60 [mm] UPPER RIGHT TURRET - X/Z stroke : 300 x 285 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1400 x 1575 [mm] - Machine height : 1670 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of hours under power : 68992 [h] - Number of working hours : 15107 [h] EQUIPMENT - CNC : Fanuc 0i-TD - Coolant tank - Parts catcher - Loading cell - Electric transformer

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, LOW USAGE - GE FANUC 20-T Iedpfsy U Ntpjx Amloif