Condition: excellent (used), Year of construction: 2002, weight max. 15/30 t workpiece diameter 600 - mm Dolqzzpjwc D Aue Hjut gear diameter 520 mm total power requirement 2 x 1,1 kW weight of the machine ca. 2300 kg

Condition: used, Year of construction: 2005, Used CNC punch press Finn-Power, type F6 SV, built in 2005 Press force: 300 kN Max. workpiece width: 4061 mm Max. workpiece length: 1528 mm Max. workpiece thickness: 8 mm Max. workpiece weight: 200 kg X/Y speed chuck: 80 m/min/60 m/min Turret head positions: 20 Dslowayzueqzzp Hsut Turret head speed: 30 rpm Travel speed: 100 m/min Oil tank capacity: 330 l Max. operating pressure: 300 bar Dimensions X/Y/Z: approx. 5900 mm, 6300 mm, 2500 mm Weight: approx. 13500 kg Control system: Siemens Sinumerik 840D The machine table has been extended. (Without machine housing)

Condition: good (used), Year of construction: 2024, Guillotine shears Manufacturer: Reinhardt Type: RAS 82.12 Dslqzzpjrlmwfe Hjut Year of construction: not specified Cutting length: 1.250 mm Sheet thickness: 2.25 mm Weight: 830 kg

Condition: excellent (used), Year of construction: 2006, Sheetlength: 3100 mm Cutting capacity: 6 mm Backgauge reach: 750 mm Featured with: - 3 Sheetsupports frontside - Access protection backside - Footpedal Motor power: 11 kW Djlqzzpjn Smtqj Heut Machine LxWxH: 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Condition: used, Year of construction: 1999, Functionality: fully functional, Dust extraction bagging unit Djlqzzpoua Hfvo Hsut

Condition: excellent (used), Year of construction: 2009, pressure 6,5 kN diameter 2 - 6 mm Dujlqzzpjwgkcco Het Rivet stamp Ø 10 x 40 throat 159 mm total power requirement 0,37 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1 * 1 * 1,5 m 2 - Hand and foot operation Sensor / Top dead center monitoring Incl. Table

Condition: good (used), Year of construction: 1988, Press brake with a maximum press force of 110 tons Maximum press length: 3100 mm Hydraulic motor: 7.5 kW Duslqzzpswgv U Do Hjt

Condition: good (used), Year of construction: 1992, Used guillotine shear, Helmut Lotze, type 205.3000x16, built in 1992 Working width: 3040 mm Max. sheet thickness: 16 mm Column width: 3040 mm Djlewaynbeqzzp Hout Thrust: 200 mm Stop width: 1000 mm Motor power: 45 kW Stroke rate: 22/min.

Condition: used, Year of construction: 1991, Max. cutting length: 3100 mm Max. cutting thickness: 10 mm steel Controlled back stop up to 1000 mm Side stops and table extensions Dujlqohlnv Uezzp Hot cutting length limitation Cutting edge lighting Weight: approx. 10,000 kg

Year of construction: 2000, Condition: good (used), Distance between centres: 1200 mm Centre height: 135 mm Suitable for: - Scrollbending - Torsioning - Ornamental iron curlings - Bending hooks, circles and ovals Featured with: - Various bending forms - Various bending accessories - User Manual Country of origin: Spain Motor power: 2 HP Machine LxWxH: 186 x 55 x 126 cm Dujlqzott Ncpozp Hst Machine weight: 400 kg

Condition: ready for operation (used), total height: 2,900 mm, total length: 3,700 mm, travel distance Z-axis: 280 mm, controller manufacturer: Delem DAC-310T, power: 30 kW (40.79 HP), net weight: 17,000 kg, total depth: 2,000 mm, Jean Perrot APH 300 ton x 3100 mm CNC Capacity: 300 ton x 3100 mm Dolqov S Ancezzp Hout Backgauge: CNC

Condition: used, _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning Deljwf Ti Asqzzp Hjut :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE mark available: Yes - Operating hours: 4428 - Control: CNC Duelqzzov Umi Nep Hst - Travel X: 6500mm - Travel Y: 3300mm - Resonator type: 7XSE-60 - Power: 37.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 1989, Used Darley CNC press brake, type EHP 200, built in 1989 Press force: 2000 kN Working width: 5200 mm Power: 15 kW Dujlqswaymkszzp Hjt Oil capacity: 160 l Weight: approx. 20,000 kg Including tools and accessories

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. disc diameter: 1000 mm Delqzzpowb Efze Hsut Motorized drive via foot switch

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels - Mandrel retraction unit - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Dujlqsn Smq Iszzp Hst Machine weight: 2300 kg

Condition: ready for operation (used), total height: 2,800 mm, total length: 4,000 mm, throat depth: 400 mm, operating speed: 7 mm/s, retraction speed: 70 mm/s, controller manufacturer: Elgo, power: 15 kW (20.39 HP), net weight: 12,000 kg, passage width: 3,050 mm, total depth: 2,200 mm, 3 axes: Y1 / Y2 / X Manual bombation (V) with digital readout Upper system tooling Laser security (in front and behind) Bending depth backgauge with Elgo CNC Capacity: 200 ton x 3600 mm Backgauge: CNC Dslsv S Apteqzzp Heut Locking speed: 80 mm/sec

Condition: used, Year of construction: 2001, Press brake, folding bench, bending press Model: Hydraulic Manufacturer: Ducci Type: Piegatrice 3x2000 Working width: 2000mm Capacity: 3mm Delqzzjv Umgujp Hout Max opening height: 120mm Hydraulische Motor: 3kW Machine-dimensions: 2700x700x1400mm Machine-weight: 2000kg - Year: 2001 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), punching pressure: 70 t, Punchingpower: 70 Ton Punching capacity: Ø 28 in 20 mm steel Throat: 300 mm Cuttingcapacity: 130 x 130 x 13 mm angle steel 90º 450 x 15 mm flatsteel 45 mm round bars Duolqzouby Sljzp Hjt Notching: 100 x 13 mm Featured with: - Elektric stop 1000 mm - Various tooling and accesories - 2 Cylinder machine Country of origin: Spain Motor power: 7,5 kW Machine LxWxH: 2000 x 1200 x 2000 mm Machine weight: 2000 kg

Condition: used, Plate roller Sheet metal roller Removable upper-roller Model: 3-rollerengine power: 3kW Duslqzzpev Umf Rj Hst Manufacturer: MAF.M Type: RH6D Max. sheet width: 2500mm Max. sheet thickness: 3mm Bottom roller diameter: 135mm Top roller diameter: 135mm Machine size: 4850x1500x1300mm - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), back gauge: 1,000 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,100 mm, Sheetlength: 3.100 mm Duelqzzjq Nip Dep Hst Cutting capacity: 6 mm Backgauge reach: 1.000 mm Featured with: - Sheet support backside - 3 Sheetsupports frontside - Footpedal Country of origin: France Motor power: 7,5 kW Machine LxWxH: 3.800 x 2.100 x 1.860 mm Machine weight: 6.000 kg

Condition: used, Empty weight: 3.800 kg Price: On request Maximum working width: 3200mm Maximum thickness: 2,5mm Maximum opening: 200mm Unfortunately no tooling for complete width - Documentation available: No - Serial number: 24/2 - Control: Conventional Duelev Umf Doqzzp Het - Motor power: 4.5kW - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 2006, back gauge travel distance Z-axis: 1,000 mm, back gauge: 1,000 mm, sheet thickness steel (max.): 10 mm, sheet thickness (max.): 10 mm, cutting length (max.): 3,100 mm, Equipment: finger protection, safety light barrier, Cuttinglength: 3.100 mm Cutting thickness: 10 mm Back gauge: 1.000 mm Control: Darley Delem Featured with: - Sheetsupporters frontside 3000 mm - Footpedal - Material conveyor - Extra sets knives - Adjustable angle guide in degrees, - Documentation Country of origin: The Netherlands Motor power: 15 kW Machine LxWxH: 360 x 220 x 170 cm Duolqovyz Anszzp Hot Machine weight: 9.000 kg

Condition: used, Year of construction: 1980, total length: 6,000 mm, total height: 2,400 mm, total width: 2,500 mm, Empty weight: 17.000 kg Price: On request - Max. sheet thickness: 25mm - Top roll diameter: 440mm - Max. working width: 2500mm - Drive: raulisch - Number of rolls: 3 - Bottom roll diameter: 440mm - Year: 1980 - Documentation available: No - Control: Conventional - Transport dimensions: 6000mm x 2500mm x 2400mm (l x w x h) - Transport weight [kg]: 17000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dujlqzzev Umfwjp Het Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1998, Notching machine, notcher Dujlqzzsv Umdgep Hst Manufacturer: FIM Cutting-width: 200mm Max. thickness: 6mm Variable Angle-Adjustment Motor-power: 4kW Machine-dimensions: 1200x1250x1300mm Machine-weight: 1200kg - Year: 1998 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren