Capacity 3100 x 6 mm

Durma ES3006

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Giodpfx Aioycxgmo Neu Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: used, max. working length: 3200 mm; max. material thickness: 3 mm for steel sheet Gijdpjyrbqasfx Ai Nou

Condition: new, functionality: fully functional, Year of construction: 2024, control type: CNC control, controller manufacturer: Durma, controller model: DT-5, stroke rate (min.): 14 1/min, sheet thickness (max.): 6 mm, back gauge: 1,020 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, ES3006 in stock Gijdjwtl Awspfx Ai Nou - Cutting length: 3100 mm - Capacity: 6 mm steel - Control: DT-5 - CNC back gauge: 1000 mm - Cutting length limitation - Easy operation - Retraction - Pneumatic sheet holder

Condition: used, Year of construction: 2025, total length: 1,100 mm, total width: 800 mm, total height: 2,200 mm, Empty weight: 540 kg Price: On request Movable pressing-cylinder Gjdpfxsw N St He Ai Njiu - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 260 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Motor power: 2.2kW - Transport dimensions: 1100mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Gijdpfx Aeg Ufvbsi Nju Oil quantity: 60l Oil viscosity: 3°E

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, grinding length: 600 mm, grinding width: 400 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Perfekt 6, year of manufacture 2002, grinding area 600 x 400 mm, grinding wheel 300 x 50 mm, 4 kW spindle power, automatic grinding cycle, roughing, finishing, spark-out, lifting, dresser mounted on spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry of a new machine. The grinding spindle has new bearings. Accessories: electro-permanent magnetic clamping plate 600 x 400 mm, water tank with paper filter unit. All functions have been tested and the machine can be demonstrated under power at our facility. We are also happy to handle on-site installation and training, as well as future servicing. Financing/leasing is available; we will be pleased to provide an offer! Gsdpjxdalfsfx Ai Njiu

Condition: good (used), Year of construction: 2002, functionality: fully functional, Ajial 3100x125tn CNC Cybelec Press Brake 2023 Brand: Ajial Model: 30125 Year: 2002 Bending distance: 3,100mm Force: 125tn Piston stroke: 200mm Motor: 12.5HP Three-phase 380V Axes: Y1, Y2, X Gjdpownxwqsfx Ai Noiu Lower die pistons for compensation. New Cybelec CybTouch 8 control, installed in 2023

Condition: used, mileage: 835,837 km, power: 309 kW (420.12 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: intarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 9,480 mm, Year of construction: 2010, construction height: 3,850 mm, number of beds: 1, Equipment: ABS, air conditioning, cruise control, onboard computer, traction control, trailer coupling, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile used truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a powerful diesel engine that delivers 309 kW (420 hp) and meets Euro 5 emissions standards. Equipped with an automatic transmission and a steerable and liftable axle, the STRALIS offers excellent maneuverability and is flexible in use. The vehicle is presented in a striking yellow metallic paint finish. With an overall height of 3,850 mm, a width of 2,550 mm and a length of 9,480 mm, it is designed for heavy load transport and has a permissible gross vehicle weight of 26,000 kg. The equipment includes two doors and two seats, air conditioning and an INTARDER braking system, which provides additional safety. The truck is approved as a truck and has a green environmental sticker (4), which allows it to be used in environmental zones. With only one previous owner and regular maintenance, the STRALIS is ready for efficient use. Steering and lifting axle Gisdpfjr Uzgcox Ai Neu Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, Pillar drilling machines Gsdpfeb N Ezrsx Ai Njiu

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 36,000 rpm, operating hours of spindle: 4,651 h, spindle nose: HSK 50, number of spindles: 15, Equipment: CE marking, documentation/manual, VERTICAL MACHINING CENTER MIKRON MODEL HSM 800 X-AXIS TRAVEL 800 mm Y-AXIS TRAVEL 600 mm Z-AXIS TRAVEL 500 mm SPINDLE HSK E 50 SPINDLE SPEED 36,000 RPM WORKPIECE PROBE LASER MEASUREMENT SYSTEM OPERATION AND MAINTENANCE MANUALS CE CERTIFICATION CNC HEIDENHAIN iTNC 530 REMOTE HANDWHEEL SIEMENS MOTORS AND DRIVES HEIDENHAIN LINEAR GLASS SCALE MEASURING SYSTEM TOTAL OPERATING HOURS: 6447 SPINDLE HOURS: 4651 Giodpfx Aiew U T Szo Nou