Used pellet mills for sale (63)

Condition: good (used), Good condition. 3 t/h. 200 kW engine. Nwodpfx Aoxzi Anegnec

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. Nsdpoxv Dkcjfx Agnswc - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: new, Year of construction: 2024, functionality: fully functional, Professional new pellet mill. It is possible to see how it is working in warehouse Lithuania. Full set: - Full automatic control cabinet. Nwjdpfx Asvyzmtognsc - Air conditioning. - Automatic bearing lubrication system. - Main engine 132 kw. Raw Material Proce:Grass, Rice Husk, Wood Sawdust, Biomass, Straw, Cotton Stalks. The motor is directly connected to the gear box to increase the conversion rate of kinetic energy and improve production efficiency. Output (kg/h):1500 - 2000 kg/h Voltage:3phases, 380V ,50hz Dimension(L*W*H):2600x1300x2300mm Certification:CE, ISO Price it is with roller and new ring die 6mm for sawdust.

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, total height: 60,000 mm, input current: 250 A, compressed air connection: 6.2 bar, input voltage: 380 V, warranty duration: 24 months, Equipment: documentation/manual, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw Nsdpfew U Ugmjx Agnswc 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 3294, type of input current: three-phase, power: 90 kW (122.37 HP), input voltage: 400 V, We are selling line from Nova pellet, 2019 production and 2020 first year of production start. -Pellet press N-MIDI 90 KW 12.500 hrs(very good and daily maintaince, 2025 new rollers and die, 200 hrs old Main tooth-belt)-2019 year Nwsdpfxswahhco Agnoc -Transporting vertical elevator ca 10m height-2019 year -Cooling tower N-CO700-2019 year -Control cabinet-NEW UNUSED -Heavy duty hammermill Miller M16(37kW electric engine)-NEW UNUSED We are selling only items above(without cyklon, filters etc.)! Line is in very good condition and had very good daily maintaince. For further informations, please write or call on our contact.

Condition: used, Year of construction: 2015, functionality: fully functional, height adjustment type: hydraulic, type of input current: three-phase, ambient temperature (min.): 5 °C, total height: 2,435 mm, total length: 1,740 mm, total width: 1,635 mm, power: 110 kW (149.56 HP), Wood Pellet PELLETIZER AMANDUS KAHL 38-780 (2015) (includes): • Amandus Kahl 38-780 pellet press • Screw mixer • Water dosing system Nwedpfxox Td Das Agnec • Hydraulic unit • Roller lubrication system • Automatic press control system • Flat die with 6 mm holes FUEL PELLETS | 6 MM DIAMETER Manufactured from sawdust, wood chips, or lower-grade wood. This solution is ideal for companies seeking to streamline production steps and minimize disposal costs. The pellet mill features an automatic hydraulic roller gap adjustment system for precise product quality control. The machine is currently installed and connected—main electric motors and hydraulic unit can be powered up for on-site inspection. ADVANTAGES OF THE KAHL 38-780: - High Reliability: Designed for continuous, heavy-duty operation. - Long Service Life & Minimal Wear: Built for longevity and low maintenance. - Reduced Lubricant Consumption: Optimized for economical operation. - Fast and Easy Die Change: Minimizes downtime and simplifies servicing. - Compact Footprint: Saves space and enables flexible integration. - Low Noise & Vibration: Contributes to a comfortable and safe work environment. - Large Pan Grinder Chamber: Suitable for processing low bulk density materials. - Large Rollers with Low Rotational Speed: Provides gentle, uniform pelletizing. - User-Friendly Start-up: Hydraulic roller gap adjustment eases commissioning. - Vertical Product Feed: Ensures smooth and efficient material throughput. - Easy Maintenance & Remote Diagnostics: Facilitates servicing and fault analysis.

Condition: new, functionality: fully functional, We offer a high-quality low-speed pellet granulator. The pellet mill is 100% manufactured at our ECOMAS Polska Czernikowo facility. We guarantee equipment engineered for continuous 24/7 operation. Our machines produce pellets that comply with EU standards—properly compacted, free from harmful additives, and with a calorific value of at least 4.6 kWh/kg. The main advantage is the use of modern, hardened dies and rollers (60HRC+), manufactured using CNC technology. Our dies ensure high output, low energy consumption, and long service life for both dies and rollers. Another benefit is the main shaft lubrication system featuring oil and oversized bearings, which significantly reduces wear! Are you struggling with your current granulator—frequent bearing failures, low efficiency, die blockages, high energy consumption, fast wear of parts, etc.? With our machines, these problems are eliminated. We provide a tailored approach to every customer! See our machines in action by searching YouTube for: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW, up to 55kW. Configuration: - Complete head with 2/3/4/5 rollers on cylindrical bearings - Welded body—completely filled with Orlen Oil Transol VG 320 - Cylindrical-bevel gearbox (98% efficiency) - Base frame - Bolted dies: Ø230, Ø260, Ø285, Ø310, Ø400, Ø520; hole diameters: 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - Standard oil tank or optional tank with pump and oil system (oil lubrication, easy oil change) - User manual - 12-month warranty Nedjxk Ta Nspfx Agnowc The buyer receives a comprehensive operating manual and a one-year warranty. We offer full warranty and post-warranty support. Prices listed below in the attached PDF file. *Product and technical solutions are protected.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC Nodpfxewp Rqfj Agnewc • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Nsdsp T Twuspfx Agnowc Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Year of construction: 2012, condition: excellent (used), Agro pellet production line ! Year - 2012 Capacity - 10t/h - Line Ai B for transporting bales, command bridge and lane - 2 pieces - Rotary crusher - 1 pieces - Rotogrind - 1 pieces - Pneumatic transport with fan - 2 pieces - Cyclone - 2 pieces - Bunker for mixing materials - 2 pieces - A line- 2 spirals for passing material - 1 pieces - line- 2 turnstiles for passing material - 1 pieces - Line A dryer with four cyclones - 1 pieces - Line B dryer with four cyclones - 1 pieces - Straight belt for transporting raw materials - 4 pieces - Slanted belt for transporting raw materials - 4 pieces - Wood chipper for shredding material - 4 pieces - Pneumatic transport with fan - 4 pieces - Material cyclone - 4 pieces - Small dosing cyclone - 4 pieces - Bunker for mixing raw materials - 2 pieces - Press dosing spiral (screw conveyor) - 5 pieces - Kahl press with electric. with a motor - 250 kw - 1 pieces - Kahl press with electric. with a motor - 250 kW - 1 pieces - Kahl press with electric. with a motor - 250 kW - 1 pieces - Small conveyor belt for pellets - 1 pieces -Small inclined conveyor belt for pellets - 1 pieces - Vibro screen - 1 pieces - Pellet cooler - 1 pieces - Elevator for returning material with two spirals Dust filter - 1 pieces - Bran filler - 2 pieces - Large inclined belt for transporting - 1 pieces pellets Silos for sacking pellets with scale - 1 pieces Nwjdjlqw Dcspfx Agnec - Electricity Cabinets - 20 pieces - Filter for extracting steam from the press - 1 pieces

Condition: excellent (used), Year of construction: 2015, COMPLETE PELLET PRODUCTION LINE 6 t/h Hydraulic walking floors - double for hard and soft wood Conveyor belt 12m with magnetic separator for chips Nsdpfx Agjqy Hcdsnowc Two hammer mills each 130 kW for wet material Two beams with hydraulic floor befor drum dryer Dryer for drums of 12 m FIEDLER boiler 3.5 MW Refiner 250kW with transport fan and filter Silos bin ZEPI for dry material Z conveyor ZEPI above three silo bins for pellet mill 0qe0k TRI Pellet Mill ZEPI ZPM600 with 200kW (2pcs) and 160Kw Pellet mill production year 2015 (two pcs) Conveyor belt 10m for hot ball, conditioner and aspirin system vibro sieve ESSEGI packaging system (ITA) 2019 Pallet system ROBOTIK KOGLER (SLO) 2015 Grecon spark detection system Electrical cabinet room for complete equipment Line in operation, capacity 6-7 t/h

Condition: good (used), Year of construction: 2014, Pellet Press Nwodpfxovdrtxs Agnoc Manufacturer - TEKNO UNO Model - TK 304 Year - 2014 Motor Power - 50 kw Capacity - 450 kg/h

Year of construction: 2011, condition: excellent (used), Zechnical details : - Year - 2011 - Capacity - 3,2 t/h - El Power - 600 kw Line consists : - Coarse Hammer mill (110 kw ) - Transporter for dust wood - Furnace Automatic feeding unit - Furnace 1,5 MW - Dryer - three passes - Ciklon and silo for dry dust - Fine Hammer mill ( 110 kw ) - Silo ower head of presses - Pellet press TEKNU UNO ( 160 kw ) - Pellet press MUNCH ( 2X75 KW ) - Pellet pransporter up to cooler - Cooler - Seave - 2 x silo cacacity 100 t - 2x pellet transporter ( one for big bag packing 1000 kg ,and another for small bags 15 kg ) - Automatic packing unit Nodpfx Asipt Dljgnowc - Robot for palletizing - reserve tools ( dies ) Factory still assemled and in production !!

Condition: like new (used), Year of construction: 2016, Straw pellet production line for sale ! Year - 2016 Capacity - 600 kg/h Nedpfx Agspa Uhujnjwc Used only 2000 working hour Line Consists : Mixer Mill Pellet press Vertical transporter 2 pieces Roto Silos for raw material 2 pieces Straw work desk Command counter A fan large Libra Vibro Sito Fan small A straw crusher Cyclone for dust Refrigerator Pellet silo

Condition: excellent (used), Year of construction: 2017, Pellet production line ANDRITZ PALADIN 2,5 t/h Year - 2017 , Only Press 2012 Nwsdpfx Aeq Rfhdjgnsc Working hours - 6.600 Exellent condition !! 1. Hydraulick - Electro crane for feeding logs 2. Logs Debarker 3. Wood chepar - 65 x 115 cm - 315 Kw electro motor 4. Hydraulic floor - New (additional field) 2 x fields 8x2m. 5. Input Lateral Transporter (606x606) Drive: hydraulic drive 5,5kW, 4hydrocilinders. Serves for raw material feed and up to 50 ° (chop and sawdust) up to 30m in length. For the towel element, Gal's transport chain is used, with hardwood slats attached to it, and the name of the flywheel carrier. It consists of a zipper, angle, flat and drive module. Drive: Hellicocentric 7.5 kW gearshift gear, class IE2. 6. Input silos Hydraulic drive 5,5kW, 2 hydrocilinders. 7. Double screw feeder Screw feeder ~4m with two screws. Used for feeding material into drying drum (through rotational valve). 8. Industry furnace – 2,5 MW (new burners, new generation). Zmaj 2,5MW is furnace designed specially for air heating in process industry. It uses exclusively pellet as fuel. It consists of 6 separate burners with automatic pellet feed. By burning pellet, furnace reaches preset temperature of air. Thermal power: 1.2MW. Volume of burner chamber: 3m3. Number of burners: 6. Power per burner: 200kW. Control: separate for each burner. Insulation: Tervol HTB 700 9. Hot air mixer Capacity: 48.000 m3/h. 10. Rotary drum dryer 3t/h Drive: 2 x 5,5kW. Capacity: 3t/h. 11. Pipelines 12. Cyclone separator 2900 Cyclon separator 2900 is part of air transport system used for separation of transporter fluid (air) from transported material (particles of sawdust). It is conected to SC fan – a drive element for air transport system. It's placed directly over the rotational valve and hammer mills. Delivered with support construction. 13. Rotational valve B (x6 small used, 2 new) Power: 3kW. Big sized rotor. 14. Hammermill 3t/h Hammers: S=10mm, HARDOX. Capacity: 3 t/h. 15. SC CB fan It consists of a chassis, a chassis, and a drive. The fan's inlet is connected with a single 1800 cyclone and the outlet with the Ø900 pipe funnel. Serves air transport from hammer mills. Capacity: 48.000m3/h. Drive: 55kW. 16. SC fan Capacity: 48.000m3/h. Drive: 50kW. 17. Cyclone1700 (x6) 18. Support construction for cyclone battery With maintenanace platform. 19. Screw feeder CB 20. PELLET PRESS ADNRITZ PALADIN 1600 ( 2 x 90 Kw ) Screw feeder beneath the cyclone battery ~5m. 21. Homogenizer – New. (new generation) Device for biomass homogenization. Provides autonomy for rest of the process. Drive: motor-reduktor 5kW. 22. Bucket elevator – Homogenizer Tranporting device for sawdust. INOX buckets, rubber belt. Drive: 3kW. 23. Preconditioner Konditioner without screw feeder. Directly influences quality of pellet and pellet press tool endurance. 24. Automatic Packing unit - 6t/h

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, power: 75 kW (101.97 HP), Complete pelletizing line consisting of: - Pellet press OGM 1.5 - Hammer mill - Cyclone - Cyclone with fan - Screw conveyor - Material silo - Material mixer for pellet plant - Elevator - Pellet collector - Control cabinet - Pellet cooler TECHNICAL DETAILS Capacity for wood: 1 tonne/hour Capacity for straw: 1.5 tonnes/hour Die for sawdust: 8 mm Nwsdew Rmpfopfx Agnsc Elevator height: 6 m MACHINE DETAILS Pellet press OGM 1.5 rated power: 75 kW Hammer mill rated power: 55 kW Cyclone with fan rated power: 11 kW

Condition: used, Year of construction: 2007, functionality: fully functional, power: 160 kW (217.54 HP), Pellet processing machine line with KUKA packaging robot. Nedpev Uh Utofx Agnswc

Condition: new, Year of construction: 2024, functionality: fully functional, power: 132 kW (179.47 HP), input frequency: 50 Hz, Equipment: CE marking, air conditioning, Brand new, unused pellet press, year of manufacture 2024!\n\nTECHNICAL DETAILS\n\nRaw material processing: grass, rice husks, wood sawdust, biomass, straw, cotton stalks\nOutput: 1,500 – 2,000 kg/h\nPellet diameter: 6 – 12 mm\n\nMACHINE DETAILS\n\nMain motor power: 132 kW\nVoltage: 3 phase, 380 V, 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 2,600 x 1,300 x 2,300 mm\nWeight: 4,500 kg\n\nEQUIPMENT\nFully automatic control cabinet\nAir conditioning\nAutomatic bearing lubrication system\nRoller and new ring die (6 mm) for sawdust\nCE & ISO certification Nwsdpfx Ajxclitegnjc

Condition: repair required (used), Two Kahl 1000 pellet mills, 185kW and 200kW. In need of overhaul. Nwodpfx Agsxmvdvonsc

Condition: excellent (used), Vomm 90kW granulator in very good condition Nwjdpfx Aexmu E Ejgnjc

Condition: excellent (used), Granulator PD 1 with 22 kW power, intended for processing sawdust into wood pellets. Used equipment. Capacity: 300–350 kg/h. The granulator is in very good condition. Nwedpfx Aoxmu Efsgnoc

Condition: used, CPM 7930 granulator with 762mm die for sawdust. Motor 200 or 250kW, 132kW also possible. Capacity 2-3 t/h. Nedpfxoxmu Dno Agnjwc

Condition: excellent (used), functionality: fully functional, height adjustment type: electric, power: 90 kW (122.37 HP), input voltage: 380 V, Ready for work. Maximum capacity from the manufacturer 1.5T/H Nwodpew Ulq Asfx Agnjc

Condition: excellent (used), Pellet line The line consists of: - CPM 7932-5 355kW granulator Nedpowcdndofx Agnjwc - Palletizer with automatic TMG wrapper - Essegi automatic packaging machine - Tanks and transport system consisting of many redlers and screw feeders - 355kW GT Zesor AG Beater Mill - Control cabinets - High-capacity sawdust sifters - Pellet sifter - Redlers and screw feeders Line with full documentation Line serviced until the end of operation with many spare parts

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator Nwodswdawqspfx Agnsc The machine has no door It worked on a cake