Used Milling Center for sale (21,979)

Condition: used, Year of construction: 2007, operating hours: 21,999 h, turning length: 170 mm, turning diameter: 140 mm, spindle speed (max.): 8,000 rpm, controller model: Mitsubishi Meldas, TECHNICAL DETAILS Turning diameter: 42 / 140 mm Turning length: 170 mm Spindle speed: 80–8,000 rpm C-axis: 0.001° Number of turrets: 2 Tool positions per turret: 12 Tool holder: VDI 20 Spindle speed for driven tools: 45–4,500 rpm Sub-spindle distance: 42 mm Spindle power: 1 kW Spindle speed: 60–6,000 rpm C-axis: 0.001° MACHINE DETAILS Control system: Mitsubishi Meldas Number of controlled axes: 8 Simultaneously machinable axes: 7 Collet chuck: 48 DIN 6343 Dimensions & Weight Footprint: approx. 2.4 × 1.6 × 2.2 m Machine weight: approx. 3.3 t Operating hours: 21,999 h EQUIPMENT Various tool holders, see images Fgsdpjz Ia Rgofx Aiveh 5 axial driven tool holders Collet chuck for pressure collets, type 173E 15 pressure collets, type 173E Additional coolant cooler Chip conveyor Knoll, year of manufacture 2018 Simultaneous operation with 7 axes on main and sub-spindle Note: Complete battery replacement on 22.12.2025

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 138616, turning length: 1,000 mm, turning diameter: 580 mm, spindle speed (max.): 5,000 rpm, controller model: Mazatrol Fusion 640 MT, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Max. turning diameter: approx. 580 mm Max. machining diameter: approx. 520 mm Max. turning length: approx. 1,000 mm Main spindle speed: up to 5,000 rpm Milling spindle speed: up to 12,000 rpm Fgsdjz Inaiepfx Aiveh MACHINE DETAILS CNC control: Mazatrol Fusion 640 MT EQUIPMENT Main spindle Milling spindle with B-axis Y-axis C-axis Chip conveyor Documentation, if available Coolant system Tool changer: automatic

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Fgedpfx Aijz N H Enjvjh Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2007, functionality: fully functional, HWACHEON HI TECH 200 B FANUC CONTROL Fjdpjz N Dflefx Aivsgh MAX TURNING DIA 350 MM MAX TURNING LENGHT 400 250 MM HYD 3 JAW CHUCK TAILSTOCK SLOTTED TURRET YEAR 2007 TOOL SETTER

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, machine/vehicle number: 216615, turning length: 995 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, milling spindle length: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 35 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 1,045 mm, torque: 468 Nm, bar passage: 76 mm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, distance table center to spindle nose: 1,234 mm, overall weight: 9,760 kg, spindle diameter: 76 mm, feed force X-axis: 38 N, feed force Y-axis: 26 N, feed force Z-axis: 38 N, Equipment: documentation/manual, rotational speed infinitely variable, MAZAK INTEGREX 200-IV / 200-IVS Chuck size: 8 inches Max. swing diameter: Ø 660 mm Max. machining diameter: Ø 660 mm Max. machining length: 995 mm Max. bar capacity: up to Ø 65 mm Main spindle: Fgodez A Huhjpfx Aivsh Spindle speed: 35–5,000 rpm Main spindle motor power: 22 kW Spindle bore diameter: Ø 76 mm Milling spindle: Spindle speed: 15–12,000 rpm Milling spindle motor power: 18.5 kW Max. torque of the milling spindle: 119 Nm Max. milling tool size: Ø 125 × 300 mm Travel ranges: X-axis: 580 mm Z-axis: 1,045 mm Y-axis: 160 mm

Condition: good (used), Hwacheon HI Eco 31A CNC Lathe, Fodpfez N A Avex Aivjgh C Axis & Live Tools, Serial Number 1053444L45, Year 1998, Swarf Conveyor, Foot Pedal, Fanuc CNC Control, 2 Jaw & 3 Jaw Power Chucks, Tool Arm, Tailstock, 10 Station Turret, Manuals, Toolholders, Transformer

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Fgsdez Ndu Eepfx Aivoh Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, Year of construction: 2010, operating hours: 62,569 h, functionality: fully functional, machine/vehicle number: 00410001121, spindle speed (max.): 5,000 rpm, overall weight: 5,695 kg, Equipment: documentation/manual, We are offering this used DMG CTX beta 500 V6 CNC turning and milling center, year of manufacture 2010. Serial number: 00410001121 Year of manufacture: 2010 Max. main spindle speed: 5000 rpm Max. counter spindle speed: 6000 rpm Weight: 5695 kg If you have any questions or require further information, please feel free to send us a message or call us. Fgjdpfjzv Tbqjx Aiveh

Condition: used, Year of construction: 2015, functionality: fully functional, NAKAMURA NTJ-100, CNC turning and milling center with FANUC 31i-B control • C-axis on the left spindle • C-axis on the right spindle • Milling drive on the upper turret • Milling drive on the lower turret • B-axis on the upper turret +/-91° • Y-axis +/- 40 mm on the upper turret • Y-axis +/- 32.5 mm on the lower turret • Bar capacity left 42mm A2-5, 6000 rpm • Bar capacity right 42 mm A2-5, 6000 rpm • 12/24 + 6 stations under 45° turret, top • 12/24 stations turret, bottom • 90° inclined bed • Interface for bar loader magazine, Hommel • Air blow-out, right spindle • Drive power left, FANUC AC11/7.5kW • Drive power right, FANUC AC 11/7.5KW • Chuck pressure monitoring, right and left • 19" touch monitor • Door lock • Clamping force control • Helical interpolation • NT-Nurse 2 • NT-Work navigator • Feed rate and rapid traverse adjustment switch • Transformer • CE marking • Memory capacity 2560 meters • Tool offset memory 99 items • Program management 2000 programs • Extended editor function Fgodpsz Iy Urofx Aivjh • Background editor • Macro B • Direct input of drawing dimensions • G52-G59 • Polar coordinate interpolation • Cylindrical interpolation • Current documentation • Machine color RAL 9002, light gray • Door color RAL 7011, iron gray • Chip conveyor RAL 7024, graphite gray Machine options NTJ-100 Air and coolant blow-out through the right spindle Ø 65mm NTJ-100 Chuck blow-out, left spindle NTJ-100 Intelligent handwheel NTJ-100 Polygon turning function Manual tool probe, removable for left and right Workpiece unloading NTJ-100 Unloading with gripper hand on the upper turret for parts up to Ø 65 mm x length 150 mm / 3.0 kg NTJ-100 Material collection tray type A with enclosed collection box, left, for material remnants and finished part ejection, part size up to spindle bore 65 mm NTJ-100 enlarged main spindle, left, Ø 65 mm, spindle nose A6 NTJ-100 enlarged counter spindle, right, Ø 65 mm, spindle nose A6 Chip disposal Hinged belt chip conveyor for NTJ-100, discharge right. Manufacturer: AME. Color: RAL 7024. Motor right, in the direction of travel.

Condition: not inspected (used), Mazak CYBERTECH TURN 4500M live tools Fedpfxoz I Egme Aivsgh

Condition: excellent (used), Year of construction: 2019, Swing over bed 900mm, Swing over saddle 690 mm, Maximum turning diameter 650mm, maximum turning length 3070mm, bar capacity 165.5mm, Spindle speed 1,500rpm, milling speed 4,000rpm, spindle power 45/37KW, 12 station turret, Fanuc I Plus control. Fgjdpfxsz Ehvfs Aiveh 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request Fodeyq Hq Njpfx Aivsgh If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,223 h, functionality: fully functional, machine/vehicle number: 1278R18TBF, turning length: 720 mm, turning diameter over cross slide: 530 mm, turning diameter: 320 mm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 720 mm, bar passage: 65 mm, total height: 2,100 mm, total length: 4,300 mm, total width: 2,000 mm, overall weight: 4,200 kg, number of tool stations in tool turret 3: 12, Due to the closure of the business, an AMV Angelini Oscar turning machine with a Y-axis and counter-spindle is for sale. The machine is very well equipped – 3-jaw chuck for the main and counter-spindle, collet chuck Hainbuch for the main and counter-spindle, parts catcher, prepared for a bar feeder, chip conveyor. High-pressure pump, 12 powered tool stations VDI30. Control system: Fanuc 21 I-TB series. Numerous accessories are included, such as turning tool holders and powered tools. The machine is still connected to power and can be inspected by arrangement. Price includes loading onto a truck (FCA). Fgjdpfx Aoy S R Atoiveh

Condition: good (used), Year of construction: 2017, Standard turning diameter 150mm, maximum cutting diameter 255mm, maximum cutting length 685mm , Fjdpfxozwm Hps Aivsgh Bar capacity main spindle 51mm, spindle speed 5,000rpm, sub-spindle 5,000 rpm, C axis 0.001 degrees, 3 x turrets 24 stations, Y axis +/-45mm, milling speeds 6,000 rpm, main spindle 15kw, Fanuc 31i, swarf conveyor, barfeed unit, parts catcher

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 2,500 mm, Mazak INTEGREX 50YR-2500U – Technical Data Fgodpfjyuucnsx Aiveh Machine type: CNC Turning/Milling Center / Multitasking Manufacturer: Mazak Control: MAZATROL PC-Fusion CNC 640MT Year of manufacture: 1999

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning diameter: 145 mm, CNC turning machine Gildemeister Twin 42 Year of manufacture: 2004 Control system: Siemens 840D Powerline Turning diameter: 145 mm Max. bar diameter: 45 mm Spindle head: Flat flange 120 h5 Chuck: 130 / 140 mm Main spindle speed: 20–7,000 min⁻¹ Main spindle power: 28 / 22 kW (40/100 % duty cycle) Fgedpfx Aszl Dvksivjh Main spindle torque: 180 / 140 Nm Counter spindle: Yes, same power X-axis: 220 mm Z-axis: 320 mm Y-axis: ±30 mm Rapid traverse X/Y/Z: 30 / 15 / 30 m/min Turret: 2 × 12 stations Tool holder: VDI 25 Machine weight: approx. 5,300 kg Connected power: approx. 40 kVA Design: 60° inclined bed, linear guides Chip conveyor, Bürener type SPE 63/30-250 Z60 Tool monitoring system, Artis type CTM Tailstock mounted on counter spindle slide, tailstock stroke = 230 mm Tailstock force = 300 daN Center bore MK3 Overload clutch for the X and Z axes of slides 1 and 2 Package for bar machining consisting of: Workpiece extraction device Workpieces can be automatically unloaded from both the main and counter spindles Workpiece dimensions: Ø6 – Ø65 mm, length approx. 300 mm, max. weight 3.5 kg Collet chuck for quick-change tool holders, size 42 Hainbuch Spanntop Connection for bar feed Bar loader magazine, IRCO type SiMag 42

Condition: good (used), Year of construction: 2013, functionality: fully functional, Technical data, prices, and images can be found in the PDF files attached. Fgodjzuddyopfx Aivsh

Condition: used, Year of construction: 2012, functionality: fully functional, Spinner TC 600 65 SMCY with C-Y axis and sub-spindle Technical data: max. swing diameter ~600 mm max. turning diameter ~400 mm max. turning length ~650 mm Travel X/Y/Z: X 275 / +50/-40 / Z 700 max. rapid traverse X/Z 15/24 max. speed 4500 rpm spindle power 22 kW torque 250 Nm max. speed sub-spindle: 6000 rpm chuck 165 mm spindle power sub-spindle: 10 kW tailstock 8 taper socket MK4 Fjdpfx Asz Iqf Usivsgh Number of tools: 16 tool holder: VDI 30 max. speed rotating tools: 5000 rpm power (60%): 6 kW torque (60%) ~30 Nm Weight: 5,000 kg Dimensions: 2.5 m × 1.6 m × 2 m Accessories: chip conveyor tool holders extraction system

Condition: used, Year of construction: 2021, Control HEIDENHAIN TNC-620 x-travel 820 mm y-travel 510 mm Fgjdez N Hx Ijpfx Aivsh z-travel 510 mm table dimensions 800 x 400 mm tool taper HSK 63 number of tool places 24 Pos. Number of working hours ca. 9.758 h weight ca. 5.300 kg Condition: Used Technical features & accessories: - 2 machine vices - Chip conveyor - EUROCOLD H2021P473 cooling unit Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included Fedpjzpd Alofx Aivjgh The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Condition: used, Year of construction: 2017, Control DMG MORI SLIMline x-travel 500 mm y-travel 450 mm z-travel 400 mm b-axis -5 / + 110 ° 360 ° table dimensions 630 x 500 mm rapid traverse 30 m/min turning speed range 20 - 12.000 U/min Drive power (40/100%) 13/9 kW tool taper SK 40 number of tool places 30 Pos. Number of working hours ca. 11.605 h spindle hours ca. 4.061 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Fgodpfsz I D Amjx Aivjh Technical features & accessories: - Chip conveyor - Internal coolant supply (ICS) - Coolant spray gun - Electronic handwheel - Direct position measuring system (X, Y, Z) - Renishaw probe kit - Oil and emulsion mist separator Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Fsdpfxez Ibais Aivegh Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: used, Year of construction: 2013, x-travel 762 mm Fgedpfxjz Nqave Aivoh y-travel 508 mm z-travel 508 mm b-axis ° c-axis 360 ° spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. Condition: Used Technical features & accessories: - Chip conveyor Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: excellent (used), Year of construction: 2008, DOOSAN MX2000ST 9 AXIS MILL TURN CENTER Sub spindle and bottom Turret Both spindles have 200mm power chucks on at the moment but we also have a Heinbuck collet chuck available good package of tooling Fjdeydigmspfx Aivsgh Shown working on our motorsport jobs all done in one! Can be demonstrated if required.

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Main spindle 4000rpm, Fsdozt Spnepfx Aivjgh sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.