Used Pellets for sale (251)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Rsdpfx Acszw Apgj Tscf Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us. Redpfxezrvh Es Ac Tjcf

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service by Asco was performed in December 2016 at 12,032 operating hours. Since then, the machine has only run for an additional 603 hours due to an investment in a brand new production line. The machine’s total operating time is 12,635 hours (12,032 h at last service + 603 h extra use). • The machine comes with complete documentation, including technical manuals and service reports. • Both the pump and the cylinder have been replaced. Rsdpfx Aoy R I Uqoc Tecf ASCO’s automatic dry ice machine produces slices of varying thicknesses and two pellet sizes (3mm and 16mm) at the push of a button. The dies for the different sizes are integrated and selectable via the touchscreen—manual changeover is not required. Theoretical output is up to 400 kg/h, depending on the type of product (block thickness or pellet size). According to the owner, the machine consistently produces at least 250 to 300 kg/h in practical use. New price: €160,000. Worldwide shipping available. Relevant keywords for search and sale: Cold Jet dry ice machine for sale, dry ice blaster for sale, industrial dry ice cleaning machine, CO2 cleaning equipment, Cold Jet Aero series, used Cold Jet, second-hand dry ice blasting machine, dry ice pelletizer, cryogenic cleaning, high-pressure dry ice blaster, refurbished dry ice blaster, 20 ft blasting hose, dry ice gun, venturi nozzle, Kärcher Ice Blaster, ASCO Jet, Cryoblaster, ICS, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion, ICEsonic, industrial cleaning equipment Europe, dry ice machine export, DrDryice. Contact for more details or to arrange an inspection.

Condition: used, functionality: fully functional, For sale is a Gránit-Mill 90 pellet press in good condition, suitable for pellet production or use in the animal feed industry. The main components of the machine are: * Pre-hopper * Feeder screw * Permanent magnet * Conditioner * Press * Control cabinet Motors: * Pre-hopper motor: 1.1 kW * Feeder motor: 1.5 kW * Conditioner motor: 15 kW * Table motor: 0.55 kW * Main motor: 90 kW Rjdpfx Aozc Eudjc Tjcf Accessories: * 2 stickers * 1 set of grooved rollers (total of 2) Additional information: The control cabinet was originally designed for the simultaneous operation of two presses, but it is also possible to control the presses separately. Price: * 1 Gránit-Mill 90 press with complete accessories and control cabinet: 29,000 EUR * When purchasing two presses together: 44,900 EUR The machines can be viewed at our location by prior arrangement. Further technical information, photos, and videos are available upon request.

Condition: excellent (used), Year of construction: 2023, operating hours: 368 h, functionality: fully functional, Pellet Plant EcoKraft LP22 – Complete Line with Bagging System – Year 2023/2024 For sale is an as-new pellet production plant consisting of two EcoKraft LP22 pelletizing lines including shredding, drying/extraction, screening, big bag system, and a semi-automatic bagging unit. Year of manufacture: Q4/2023 Commissioning: Q1/2024 Operating hours: Pellet press 1: 368 h Pellet press 2: 126 h Scope of supply: Redpfsynzcujx Ac Tocf 1x Hacker HA1100 (22/30 kW) 1x Cutting mill SMC 500/700 (37 kW) 1x Extraction & filtration unit SMU60 2x Material bunkers MB3LPS (each 3 m³) 2x Dosing systems DS25 2x Pellet presses LP22 (each 24 kW) 2x Screening units with conveyor belt 20x Big bags incl. frame 1x Semi-automatic bagging unit AS900 (400 g – 60 kg, calibration-ready) Special features: ✔ Fully interlinked system ✔ Integrated metal separator ✔ Temperature monitoring & central lubrication ✔ Both big bag and sack filling possible ✔ Very low wear / few operating hours ✔ New price: €577,138 net Sale price: €395,000 net Including assembly, transport, commissioning, UVV (accident prevention regulation), risk assessment, and operator training—only within Germany, Switzerland, and Austria. Viewing by appointment possible.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Rcedei Akrkopfx Ac Tjf Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request Rjdezcf Dlepfx Ac Tscf 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution). Rcsdpoyrhd Tjfx Ac Tef

Year of construction: 2020, condition: used, functionality: limited functionality, We offer this technological line for pellet production from vegetable waste (sunflower husk) – BART-M SRL OGM 1.5, manufactured in 2020, in used condition. Manufacturer: BART-M SRL Model: OGM 1.5 Year of manufacture: 2020 Condition: used Category: 34 Productivity: 800 kg/hour Weight kg: 6800 Dimensions mm Length: 5385 Rodpfx Aoztaahoc Tocf Width: 4400 Height (without exhaust pipes): 6935 Traction: electric Energy performance Total installed power kw: 150 Type of current: Alternating Current frequency hz: 50 Network voltage V: 220/380 Agrotechnical performance: Admissible amount of non-granulated raw material: 2% max Admissible moisture content of cooled granules: 12% max Technical characteristics of the finished product: Caloric value of the granules Mj/Kg: 14-19 (vegetable waste) Kw/kg: 3.89-5.27 Diameter mm: 6-8 Length mm: 40 If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 Redpfx Ajzvc R Uoc Tjcf MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. Rodpfx Acjznz Ezs Tecf The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST Rsdpfx Ajv Sq Rloc Tscf 630/150 die and rolls Force Feeder with a 0.9KW motor Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Customer to arrange collection and freight

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW Redpfxszvq Rco Ac Tscf The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer this pellet production line from STOZA s.r.o., in very good condition, year of manufacture 2014. Manufacturer: STOZA s.r.o. Year of manufacture: 2014 Condition: very good Category ID: 659 Type: Pellet production line Redey Ah Nfjpfx Ac Tjcf If you have any questions or need further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2024, Pellet production plant – complete line – fully automated Salmatec press Rematec hammer mill Belt dryer VAI bagging machine Cooler Rcsdozg Eudopfx Ac Tef Sifter Palletizer Less than 1000 operating hours – certified Option for on-site reinstallation Option for on-site operator training

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: Pal 1600, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1 pellet press brand: Paladin 1600-210 inner diameter die 850 mm tread die 210 mm Redpfxsq U R N Te Ac Tecf Press is equipped with 2 motors each 90 KW n=1500. Press door is made of stainless steel with overload valve in door. 3 Roll press with 3 rolls on the press overhauled in a drilled or racked version Press is complete with mold lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts and toothed belt. Also, all safeties will be observed and appropriate switches on Friction safety , door switch and inspection hatches will be fitted. Refurbished pump unit for friction and V-belt tensioning Remark: Conditioner on the press is optional

Condition: as good as new (ex-display), This pellet press, a machine for producing wood pellets, is being auctioned off in our industrial auction/machine auction as part of a stock clearance, warehouse sale – including individual and demonstration units – online. You can find this and many other items on our platform. Rcodpfezv Runsx Ac Tef

Condition: used, functionality: fully functional, Year of construction: 2015, Palletizer and pallet wrapper Capacity 100 kg / h Used, no warranty This machine is located in Tata, Hungary. What is Pellet? Pellets are a natural biofuel made from made from agricultural and forestry wastes, such as dried sawdust, compressed into small cylinders with a diameter of a few millimetres. It possible to obtain a compact product with no additives and chemicals. Rjdpfx Acstw Szaj Tecf Benefits of pellets? Among the most important advantages: environmental sustainability (reduction of deforestation and GHG emissions); cheap to produce and affordable to buy. And, due to the pressing process, the calorific value of pellets is approximately double that of wood for the same volume.

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Technical data: - Screen: 6 mm Rcedpfxezryyrs Ac Tjf - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h

Condition: used, Granulation and packaging line. Model: HM700E PRO 11KW Year of manufacture: 2022 It includes: Hammer mill - shredder Chip mixer Chip feeder Granulator Vibrating table Product feed belt (conveyor belt) Pellet hopper with packaging equipment Bag sealer and chip moisture meter Hammer mill with cyclone Motor: 11 kW / 400 V Productivity: 300 - 700 kg / h Weight: 360 kg Soft start installed Cutting system 16 hammers Chip mixer: Volume: 1.0 m³ Rsdpfx Acoxcy D Es Tocf Chip feeder: Motor: 3.3 kW / 380V Feeds up to 800kg / h Granulator: Motor: 22 kW / 380V/50hz; Productivity: 300 - 700 kg/h Weight: 590kg Soft start installed Vibrating table: Weight 90kg Product feed belt (conveyor belt): Dimensions: 5m × 0.4m. Automated packaging equipment: Dimensions: 1, 90x2, 50x2, 30 Volume: 1.5m³ Packing in bags: 1 - 50kg Equipped with two types of scales Bag sealer 220V Moisture meter

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Rcedpfx Aew Ry U Isc Tsf

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high. Redpeynnliofx Ac Tocf

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. Rjdpfx Acex S Ibgs Tocf A new die with rollers has been manufactured for it and is available for an additional price. For additional information, please write on Whatsapp.

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Rcodpfx Acoyvz Afj Tsf Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: excellent (used), functionality: fully functional, EKOCHEM Underwater Granulation Head RW-440-II - Water Ring Granulation - WRG The EKOCHEM RW-440-II is a high-performance underwater granulation head for processing a wide variety of polymer materials. Its robust construction, pneumatic knife pressure system, and closed water circuit ensure reliable and economical operation, even with high throughput rates. A suitable centrifuge for drying the granules is already installed together with the granulation unit. Technical Data * Model: RW-440-II * Throughput: 600–1,500 kg/h * Number of granulation knives: 4 * Cutting knife speed: 2,910 rpm * Cutting knife drive power: 3.0 kW * Heating zone power: 3.8 kW * Max. operating temperature: 280 °C * Max. permissible melt pressure: 120 bar Features / Advantages * Compact and robust design * Pneumatic knife pressure system Rsdpfx Acsznu S Us Tjcf * Precise knife centering thanks to linearly guided knife holder * Fast and easy knife change * Free access to the interior for maintenance work * Short setup and maintenance times * Suitable for a wide range of polymer materials * Granule size can be individually adjusted The system is in very good condition, fully functional, and immediately available from stock. An inspection can be arranged at any time.