Pellet mill, pellet mill, pellet plant

WALW-Solutions

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height Bledpfsxv Dkcsx Agzed The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Bsdpfxev Evx Uo Agzeld Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour is for sale. The factory is little used – only 16,000 tons were produced, it is in very good technical and visual condition. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. No additional premises are required for the installation of the plant, the pellet press is already built into the container. The line includes: Bjdpfx Agex S Egmozold Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency and long-term stability. Transport and dosing equipment: Rematec – robust and accurate material supply at all stages. Tent shelter. Additional equipment: cyclones, sieves, cooler, control panel, etc. All DWG files, drawings for the foundations of the equipment are available. Main advantages: Large production capacity – up to 3 t/h. High quality components from European manufacturers. Ability to adapt to usage of different raw materials. Line in working order – can be demonstrated in operation. Available immediately.

Condition: excellent (used), Catalog number 6726 TECHNICAL DATA - Loading hopper inlet 280x300 mm - Discharge outlet for chipped wood Ø 310 mm - Rotor working width 340 mm - Main motor 22 kW - Number of knives 6 pcs - Dimensions (L/W/H) 1300x1150x1680 mm Bsdpfx Asignt Ujgzjld - Weight 720 kg ADVANTAGES – very good condition – used wood chipper Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total height: 2,070 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Comafer K100, output 100 kg/h. 6mm pellets, chips with 8-12% moisture content. Material is ground by a mill to the appropriate fraction (5.5 kW), then fed by a screw conveyor into a ring die pellet mill (7.5 kW) where it is compacted. The process is fully automatic, controlled from an electrical control cabinet. Very high pellet quality. Bsdpfx Ajw Hnglogzjld

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, Fully refurbished pellet press from Italian manufacturer ZEPI. The main engine power is 315kW, which allows the production of up to 6t/h of wood pellets. The delivery set also includes a ZEPI ZC500 paddle mixer and a ZEPI ZFS250 feed unit. Bjdpfx Agevpvp Iezold

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted. Bjdpfxerah Eve Agzold

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Bedpfx Ajxqd T Hsgzeld Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). Bjdpfxjxcgy Hs Agzeld The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. The exact remaining work required is not known.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. Blsdjwrp Emepfx Agzsd - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las