Used Pellet Pres for sale (12,056)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Hodpfxsz I Tktj Akiow Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication Hsdoz Rwimspfx Akiow • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Year of construction: 2024, condition: new, functionality: fully functional, The copper wire granulator can recycle waste copper wire into separated copper and plastic, the process capacity is 100-180 kg/h, the dry physical crushing method does not produce pollution. The granulator is sold with a pre-shredder and a conveyor belt with magnet! Design and manufacture 99.99% excellent efficiency and reliability, advanced technology: ● Airflow gravity sorting system to discharge the copper particles from the insulation. ● Strong vibration separator to separate the weight of the copper granules from the insulation ● Self-cleaning dust collection system to reduce maintenance time and remove dust. ● The machine is compact and takes up little space ● 99.99 % copper purity recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical specifications Model GRS 180KG Current voltage Hsdpou Tq S Hjfx Akiow 380V Power output 8,7 kW Frequency 50 Hz Processing capacity 100-180 kg/h Size of machine 80*137*204CM Net weight 518 kg

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Hjdpfx Ake Agk Rioijw Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Inventtol B.V.

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 305.537.1992, warranty duration: 12 months, Le Meccanica CLM630ST 630/150 die and rolls Force Feeder with a 0.9KW motor Currently undergoing full refurbishment - Seals &bearings included Colour - customers option Hodpfjv Sq Rlex Akiew Customer to arrange collection and freight

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Hedpfx Ajzaricekisw Die head Electrical wiring Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Hjdozrvh Eepfx Akijw Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. Hodpfx Aksx S Ibgsiew All bearings were replaced 1 year ago. It was working very well before it was disassembled. A new die with rollers has been manufactured for it and is available for an additional price. For additional information, please write on Whatsapp.

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Capacity - 2t/h Hsdsz I S Svepfx Akiow Pellet press - ZEPPI 132 Kw Year - 2014 Exellet condition !

Condition: used, Year of construction: 1985, functionality: fully functional, For sale: granulator from the renowned manufacturer Buhler. Granulator model: DPAA-660 Motor power: 160 kW – option to install a more powerful motor – 200 kW. Die diameter: 660 mm, Die working width: 160 mm, Granulator output on straw / sawdust: 2 – 2.5 t/h The granulator is currently dismantled. For a committed buyer, we will assemble it using new wear parts. Hsdpjw Uh Nzofx Akisw Contact for more photos and details. Machine available for inspection in Sępólnie Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. Hedpfsz I Tzxjx Akiow The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: new, Year of construction: 2026, operating hours: 2 h, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw...) animal feed... This is a complete system (compact system) which is built on a base frame and consists of the following components: Hedevlz H Rspfx Akijw Storage container for raw material 4 m³, including agitator Inclined mixer for raw material including level sensors and fully automatic moisture dosing Dosing container for pressing aids (e.g. corn starch) Dosing screw for optimal material feeding of the press (speed-controlled) Press 15 kW, with horizontal round die, discharge chute, temperature monitoring, overfill protection..... Conveyor belt for pellet removal, discharge height approx. 2.5 m Drum sieve for dust removal and cooling of the pellets The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! The system is designed and prepared for the operation of a second press! Price excl. VAT! !!!!! Attention!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 26/2632, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1. Pelletizing press, brand: Paladin 1600-210 Internal diameter of the die: 850 mm Die surface: 210 mm The press is equipped with 2 motors, each with 90 kW and a speed of 1500 rpm. The press door is made of stainless steel and has an overload valve. 2. Roll press with 2 rolls on the press, refurbished with a drilled or ribbed design. The press is complete with a die lifting device and tools. New rear plate for the 2 rolls. The press has been completely refurbished and fitted with new bearings and wear parts, such as front and rear sliders, die adjustment ring, etc. Also includes new V-belts and toothed belt. All safety features will be taken into account, and appropriate switches will be installed. Friction protection, door switch, and inspection hatches will be mounted. Refurbished pump unit for friction and V-belt tension. Note: Hedpfx Ajq U R N Tokiow Conditioner on the press is an optional extra.

Condition: refurbished (used), Year of construction: 2026, Pellet Press for Sale Manufacturer - General Dies Engine Power - 200 Kw Hsdpjzq E Avsfx Akiew Capacity - 2,2 t/h Year - 2014 / 2026 Reconditioned

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, type of input current: three-phase, power: 160 kW (217.54 HP), input voltage: 380 V, warranty duration: 12 months, year of last overhaul: 2023, Equipment: documentation/manual, 1 pellet press make: Buhler DPAB inner diameter die 660 mm tread die 138 mm Press is equipped with 1 motor 160 KW . Press door is made of Stainless steel with overload valve in door. 2 Roll press with 2 rolls on the press overhauled in dimple or racked version Hedpfx Akerah Eveijw Press is complete with die lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts Also, all safety devices will be observed and appropriate switches on Friction protection , door switch and inspection hatches will be fitted.

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Hedpfoi Akrksx Akisw Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: used, Münch RMP 660 pellet press for the production of wood pellets and biomass pellets from sawdust, wood shavings and other organic waste materials. The machine is suitable for industrial pellet production, offering high pressing capacity and consistent pellet quality. Ideal for wood processors, sawmills and biomass plants. Hsdpfx Akjzryyrjiow Technical data: - Screen: 6 mm - Motor: 2 x 90 kW - Inner diameter of die: approx. 660 mm - Number of press rollers: 2 - Pressing capacity: up to approx. 3–5 t/h

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: Hjdpfxjzvq Rco Akiew • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Condition: used, Year of construction: 2024, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, overall weight: 4,500 kg, input voltage: 400 V, Equipment: documentation/manual, For sale is a Himel / Gama pellet press for straw / hay / alfalfa, optimized! According to the manufacturer, it has a capacity of 700 - 1200 tons per hour, depending on the biomass! The press was installed as a temporary solution because identical models were undergoing a complete overhaul. Hjdpfxozzf D Io Akiow

Condition: used, Year of construction: 2022, functionality: unexamined, 23 complete containerised pellet boiler houses for sale – 13 × Ba-120 (120 kW) and 10 × Pereko KSR 130 (130 kW), 2.86 MW in total. Price is per unit; volume pricing for 5+ units and for the complete lot of 23. Each unit is a self-contained mobile heat plant: boiler, burners, buffer tanks, plate heat exchanger, flue system and 12 m³ pellet silo in one insulated heavy-duty container. Crane it in, connect flow/return, heat on – no boiler room, no construction. BOILER Hsdoz Iy Ilspfx Akijw - Ba-120: 120 kW, 70/90 °C, heats approx. 2,180 m² / 5,450 m³ - Pereko KSR 130: 130 kW, 57/95 °C, heats approx. 2,360 m² / 5,900 m³ - Both: 2 × ECOMAT 70 pellet burners (agro pellets / sunflower husk capable, up to 98 % combustion efficiency), turbulators in fire-tube heat exchanger, max. 1.5 bar, flue 300×300 mm, G3 connection, 230 V / 500 W, power modulation 90 % - EN 303-5:2012 (MSZ EN 303-5:2013) STANDARD PACKAGE (every unit) - Heat buffer: 2 × 1,000 L insulated (Hajdu PT1000) - Expansion: 3 × 200 L pressure vessels - Heat exchanger: APV / SPX TR1-MV-16I/2 plate HX, 140 kW, 10 bar - Flue: hot-gas induced-draught fan 450 m³/h / 800 Pa, vortex-tube cyclone separator (92 %), insulated acid-resistant modular chimney, draught monitoring - Fuel: 12 m³ external double-insulated pellet silo + screw feeder to internal day hopper - Ash: Ø100 mm geared ash screw to closed external bin - Controls: manual / automatic mode, control cabinet with PC, remote monitoring & fault alerts via internet, heat meter - Container: 6 × 2.5 × 2.5 m internal, PIR sandwich panels U = 0.4 W/m²K, 6 t steel floor, crane lugs, security lock, 0.9 × 2.1 m door CONDITION Pre-owned, complete, in storage since 2022. Sold as is, where is. Inspection by appointment in Hungary. Transport and recommissioning can be arranged. Ideal for schools, clinics, municipal buildings, farms, greenhouses, worker camps and emergency / temporary district heating. Full technical documentation in English and Ukrainian available on request.

Condition: used, Year of construction: 1988, height adjustment type: hydraulic, 1x Used KAHL C39 - 1000 Pellet Press Pelletmill Incl. Hydraulic nut Incl. 4 Roller head Incl. 5 Roller head Hsdpfx Ajv N Rdaokiew Incl. various spare parts Incl. chassis 110kW 1500rpm Electric motor

Condition: good (used), Year of construction: 2014, Pellet Press Manufacturer - TEKNO UNO Model - TK 304 Year - 2014 Motor Power - 50 kw Capacity - 450 kg/h Hsdsvdrtxepfx Akijw

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Hedeud Nx Hopfx Akiow Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: used, Pellet press Manufacturer: CPM Model: 7930-4 Hodpfxjy E Rrbe Akijw Year: 2019 Complete with feed mixers

Condition: used, Ražotājs: Munch Modelis: 420 Ražîba: 1 tonna stundā Elektrojauda: 2x75 kW Diametrs 420 mm Komplektā ar dzesētāju pēc kapitālā remonta clear Hjdpowfqn Ajfx Akiew 134 / 5,000 Translation results Translation result Manufacturer: Munch Model: 420 Production: 1 ton per hour Electric power: 2x75 kW Diameter 420 mm Complete with cooler after overhaul