Used Briquetting presses for sale (89)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, power: 5.5 kW (7.48 HP), WEIMA C 150. The press is equipped with direct extraction, suitable for connection to saws and spindle moulders. The machine has only been used for plastics (PUR foam boards). Motor power: 5.5 kW, 400 V, 50 Hz. Weight: 830 kg. The press has seen minimal use and is in excellent condition. Can be demonstrated. Still in operation but rapidly available. Includes fan, ducts, and 3 pneumatic slides. Gkodpfx Aoxk Ttpsacsc

Condition: used, Two Valmac briquetting presses with a screw conveyor, storage silo, cooling line, and crusher. Further information available upon request. Briquette diameter: 70 mm engine: 37 kW each power: approx. 400 kg/h per press Gedpfx Aasw Dnc Ujcskc

Condition: new, Year of construction: 2025, operating hours: 6 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Gksdpfx Ajgl Nlmoacoc Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: excellent (used), Catalogue number 7737 Gjdpfxexbr I Ho Aacokc TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Output: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg FEATURES – Italian-made – Used briquetting press – DTR technical documentation – Very good condition Net price: 36,900 PLN Net price: 8,680 EUR based on exchange rate 4.25 EUR (Prices may change with significant currency fluctuations)

Condition: new, Year of construction: 2024, Super special price, as it was on display at our in-house exhibition. Gsdpfxslht H Eo Aacskc Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2018, operating hours: 619 h, functionality: fully functional, machine/vehicle number: 910-2345, total width: 1,120 mm, total height: 1,400 mm, total length: 1,700 mm, briquette diameter: 40 mm, overall weight: 600 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, pressure: 150 bar, power: 4 kW (5.44 HP), WEIMA C140 briquetting press with chip container, almost like new with very few operating hours, with 380 V plug, ready for demonstration. Gsdpexg R Iisfx Aacjkc

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button Gjdpfswyc H Tox Aacskc - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: repair required (used), Year of construction: 2004, power: 30 kW (40.79 HP), NOT COMPLETE NOT TESTED hydraulic power supply 400V / 50Hz / 70A, capacity 440-500kg/h Gsdeqd U Smspfx Aacekc full automatic

Condition: used, Year of construction: 2015, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: 1637, power: 75 kW (101.97 HP), Equipment: emergency stop, safety light barrier, We offer a fully operational briquetting line with a current capacity of 1 ton/hour, producing high-quality cylindrical briquettes (Ø 85 mm), expandable to 2 t/h The line has been in operation since 2015 and is still running – available for inspection in production until end of October 2025. Main equipment (2015 installation): Briquetting press DiPiu MB-90 (Italy) Fully automatic saw for briquette cutting Automatic packaging line (5 pcs = 10 kg bundles) Stretch-film pallet wrapping system 2 × Fiedler boilers, 600 kW each 2 × BS-2 drum dryers Taurus crusher (CZ) Cyclone and dedusting system Digital control & monitoring system by KME Brno (remote monitoring, SCADA type) Upgrades (2018): Godpfxexga Rtj Aacokc Star screen system (separating oversized particles from sawdust) Bucket conveyor (feeding raw material from crusher to 5 m³ buffer hopper above press) Additional conveyors between production stages Optional equipment (extra cost): Second DiPiu MB-90 briquetting press available Additional automatic saw → allowing expansion to 2 tons/hour capacity Product quality: Briquettes supplied into major retail chains (e.g. Hornbach) – proven premium quality. Price & conditions: Asking price: E 280 000 (negotiable for fast decision) Availability: November 2025 Location: Volenice, Czech Republic Condition: Used, well maintained, fully operational Reason for sale: Facility to be converted into new metal workshop. Zu verkaufen: Komplette Brikettierlinie – Kapazität 1 t/h (erweiterbar auf 2 t/h) Wir bieten eine voll funktionsfähige Brikettierlinie mit einer aktuellen Kapazität von 1 Tonne pro Stunde, die hochwertige zylindrische Briketts (Ø 85 mm) produziert. Die Anlage ist seit 2015 in Betrieb und läuft noch heute – eine Besichtigung im laufenden Betrieb ist bis Oktober 2025 möglich. Hauptausstattung (Installation 2015): Brikettpresse DiPiu MB-90 (Italien) Vollautomatische Säge zum Brikettieren Automatische Verpackungslinie (5 Stück = 10 kg Bündel) Stretchfolien-Palettenwickler 2 × Fiedler-Heißwasserboiler, je 600 kW 2 × Trommeltrockner BS-2 Taurus-Zerkleinerer (CZ) Zyklon- und Entstaubungssystem Digitales Steuerungs- & Überwachungssystem von KME Brno (Fernüberwachung, SCADA) Modernisierung (2018): Sternsieb-System (Abtrennung von groben Partikeln) Becherwerk (Förderung des Rohmaterials vom Zerkleinerer in den 5 m³-Pufferbunker über der Presse) Zusätzliche Förderbänder zwischen den Produktionsstufen Optionale Ausstattung (gegen Aufpreis): Zweite DiPiu MB-90 Brikettpresse moeglich Zusätzliche automatische Säge → ermöglicht eine Erweiterung auf 2 Tonnen pro Stunde Kapazität Produktqualität: Briketts wurden an große Einzelhandelsketten (z. B. Hornbach) geliefert – nachweislich Premiumqualität. Preis & Bedingungen: Preisvorstellung: €280.000 (verhandelbar bei schneller Entscheidung) Verfügbarkeit: ab November 2025 Standort: Volenice, Tschechische Republik Zustand: Gebraucht, gut gewartet, voll funktionsfähig Verkaufsgrund: Umstellung der Produktionsstätte auf eine neue Metallwerkstatt.

Condition: used, Year of construction: 2019, Used machine Identical in construction to Weima C 150 Gedsw Rhk Depfx Aacokc Year of manufacture: 2019 1845 operating hours Equipment and technical data: Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil capacity: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection rating: 400 V +/- 5% / 50 Hz Includes: Press mechanism with filling cylinder, main cylinder, clamping cylinder Connection part for transport line Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Control cabinet and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: shavings, sawdust from solid wood, loose, clean and free from contaminants* Maximum dimensions: 10 mm Throughput performance: approx. 50 m³/year/ * Contaminant specification: Everything except wood, wood pieces larger than 15 mm. The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics! Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler. In case of heat build-up, operating time may be drastically reduced due to increased temperature. With new press clamp Availability: by arrangement Location: Flörsheim

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Gsdstnz Ttopfx Aacokc Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: good (used), Year of construction: 1990, still well-preserved briquetting press Hydraulic motor 5.5 kW Chip container below: 120 x 120 cm Gkjdpfx Asxdlhreacsc with slanted top extension (top 2 m), 85 cm high A filter top extension is available on request (for an additional charge) A smaller top extension made of wood can also be constructed

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: BP 500 A, DESCRIPTION BRIQUETTING PRESS The press is designed for compacting secondary raw materials into briquettes (briquette shape: rectangular). Technical data of the press: Dimensions: Length: 1800 mm (2100 mm during transport) Width: 1800 mm (2000 mm during transport) Height: 1900 mm (2200 mm during transport) Net weight: 2945 kg Power supply: 380 V 50 Hz 33 kW 70–100 A Output capacity: 450 kg/h (+/-50 kg depending on the type and fraction of raw material) Noise level: A-weighted sound pressure level at the workplace: 77.8 dB +/-5 dB Compression force: Minimum: 1000 kg/cm² Maximum: 1700 kg/cm² Gkodpfexmav Nex Aacec Pressure: Max. 300 bar Maximum raw material moisture: Not more than 14% Briquette dimensions: Width: 150 mm Thickness: 60 mm Length: 40–105 mm Permissible operating ambient temperature: -20°C to +35°C (up to +50°C with additional cooling system) The press consists of: Electrical system — controls the hydraulic press system. Equipped with four electric motors: the first (30 kW) is for driving the main hydraulic pumps; the second (1.1 kW) is for the cooling pump; the third (0.55 kW) is for the fan of the oil cooling system; the fourth (1.5 kW) is for driving the sawdust feeding screw. The operation of the motors and hydraulic valves is controlled via contactors and intermediate semiconductor relays by a microprocessor with expansion modules. A liquid crystal display with buttons is provided for visualization and parameter adjustment. Hydraulic system — controls the operation of hydraulic cylinders using pumps, high and low-pressure lines, solenoid hydraulic valves, and hoses. There are three hydraulic cylinders: the first (main), designed for pressing sawdust; the second (vertical), for the preliminary compaction of sawdust; the third (forming), for transferring briquettes to the mold. An oil cooling system with pump and air cooler is also installed. Oil filtration is provided by the main high-performance filter, a cooling system filter, and a fine filter. Feeding of raw material is provided via a feed hopper integrated in the press. The raw material entering the hopper is intermittently mixed to prevent bridging. The agitator is driven via a chain from the screw drive motor-reducer. The screw cyclically feeds raw material into the vertical cylinder shaft. The hopper is equipped with two level sensors (lower and upper). If the hopper is enlarged, the sensors can be relocated as needed. Control — dual operation: manual and automatic. All control equipment is installed in the electrical cabinet. Automatic control is the standard operating mode of the press without operator intervention. Manual control is intended for press setup, fault detection, cylinder reset, or in case of emergency. Operation is simplified by the display located on the cabinet door, which allows the user to view and modify parameters and monitor the condition and errors of the press.

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Gkjdpfx Aasqd Uy Ajcjc Weight: 3000 kg Total power: 33 kW

Condition: excellent (used), CATALOGUE NUMBER 7153 TECHNICAL DATA - hydraulic pressing force - round briquette form - briquette diameter 70mm Gedpfxepu Avmo Aacekc - tank dimensions height/width 920x870mm - capacity about 110kg/h - automatic machine operation - oil cooler - oil heating - inspection window - 7.5kW engine - dimensions length/width/height 1750x1300x1460mm - weight 825kg ADVANTAGES - unpainted - Italian production - used briquette press - very good condition Net price: PLN 45,900 Net price: EUR 10,800 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, noise level: 80 dB, Equipment: cooling unit, emergency stop, *For sale: Mobile wood briquetting plant. *Ruf RB440 press > 2 hours/1 ton. *Press completely overhauled with all supporting documentation. *Truck roadworthiness certificate (TÜV) valid until Jan. 2026, ready to drive and permitted for use in environmental zones/Green badge/Tax-exempt!!! Special-purpose vehicle—work machine!! *PE packaging bags for approx. 90 tons included. *Hydraulic pump (Linde) > New. *Discharge gearbox > New. *Intake blower motor > New. *Complete hydraulic oil change, 200L > New. *Many spare parts available due to business closure. *Truck: MAN 14.232 / 335,937 km, year of manufacture: 1990. Gsdpfx Aajwhw Syscskc *Truck with new, reinforced flatbed! Manufacturer: Suhr. *Roadworthiness certificate (TÜV) > New. *Tires (all 6) > New. *Front axle brakes relined. *Sale includes full operation instruction/training. *If interested, please contact by email.

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. Gkjdpsil Hggofx Aacoc User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: excellent (used), functionality: fully functional, BRIQUETTING machine , HYDRAULIC , AUTOMATIC , model POR STANDARD second hand machine working conditions : Excellent briquette cutter system CE mark : Yes briquett diameter mm. 65 briquett length mm.50 / 300 Godpfxsw E Iyis Aacskc production from 60 kg. to 90 kg./hour motor power Hp 7,5 net weigth kg. 800 overall dimensions cm.195 x 110 H=cm.150 volt. 380/50

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, briquette diameter: 60 mm, Reconditioned machine suitable for smaller single-shift joinery operations. It offers a robust construction with good performance. Max. briquette production 70 kg/hour. Year of manufacture 2003. Very good and preserved condition. Original warranty and after-sales service directly from our company. PRODECO professional hydraulic briquetting presses are suitable for small and medium-sized wood processing plants. They allow efficient processing of waste into ecologically clean and high calorific fuel without the use of binders. They are characterized by low space requirements, low energy consumption and simple operation. Technical data: Engine power: 5.5 kW Briquette production: 35 to 70 kg/hr depending on material Briquette diameter: 60 mm Briquette steps max 60 mm (infinite briquette) Gkodjvva Rpspfx Aacsc Hopper diameter: 1000 mm Weight 650 kg Machine dimensions: 1170 x 1700 x 1510 mm Features: Hydraulic unit 7 press cycles/min. Double pressure gauge for better pressure control. Level probe for briquetted material Probe for oil level height Inspection window CE safety standard Moisture content of the material to be processed must not exceed 18% Machine is fully reconditioned, adjusted, and tested.

Condition: used, In a woodworking plant, several hundred kilograms of dry wood waste, wood shavings, sawdust, etc. can be generated daily. This in-house waste can be processed into raw material suitable for briquetting. With a complete hydraulic briquetting system — capable of producing 50-120 kg of briquettes per hour — the wood waste generated in the workshop can be efficiently converted into wood briquettes. In this way, the building can be heated using the briquettes. The investment can pay for itself within a year, and afterwards, it can generate profit. Additionally, the system provides efficient, cost-effective waste processing. An optional oil cooler can be connected to the E70 Eco model, enabling continuous operation. Thanks to the higher capacity, the machine does not need to run for a full eight hours per day, since the same amount of briquettes can be produced within a shorter period. Godpjxl Ri Dofx Aacekc

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max working pressure: 150 bar - Extraction nozzle: 90 mm - Filter bag opening diameter: 500 mm - Max bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Italian manufacturing – Possibility of direct connection to sawdust extraction – Used briquetting machine – DTR documentation Gedpfx Aexa Ephoacekc – Very good condition Net price: 29,900 PLN Net price: 7,050 EUR (exchange rate: 4.25 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Gsdpfx Asxdahyoacskc Feeding hopper diameter: 1170 mm Technical documentation CE mark Machine weight approx. 800 kg

Condition: new, Year of construction: 2024, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Gsdecnz U Eopfx Aacjkc Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading

Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg Gkjdpfx Ajbtnf Eeacjc

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Gkodpotnz Hbofx Aacsc Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg