Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, CPM pelletizing plant - Water dosing system - Pre-dosing press and mixer - 2x CPM 7930-4 each with 315 kW drive motor - Cooler with sprinkler system - sieve Us8F09L0Hf - Outlet - Switching barriers with control - Lysair cyclone system for dust extraction

Condition: used, Year of construction: 1996, Glue press Stromab STP 3000 Max bounce size 3000x2000mm Year of construction 1996 mobile Chxuvr9Lzd *One clamp is missing Transport dimensions: 3900x900x2470mm (LxWxH), weight 400kg

Condition: used, Emergency stop bar, Control by push-button, gold anodized plates ----- Technical data ----- 0Ttxflli Pressing area: 2,500 x 1,250 mm, max. opening height: 400 mm, Number of cylinders:: 4 pieces Sold as is, without technical inspection

Condition: ready for operation (used), Technical characteristics Single piston press for truss production Dpnqxv Bridge mobile over the length of the table Table length : 15 meters Table width : 3.80 meters Useful pressing height : 130 mm Machine supplied with rails Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: used, used veneer press model, OTT JU 95 (2 cylinders newly repaired) panel length approx. 2.550 mm panel width approx. 1.200 mm Pressing force 95 t Number of cylinders 4 E2Ovyay Weight approx. 3800 kg

Condition: as good as new (ex-display), Year of construction: 2024, new heating plate press, hydraulic ITALPRESSE type XL/6 30-13 with gold anodized plates Touch display control - electric heating plates 3.000 x 1.300 mm - Total pressure 90 to. - Number of heating plates 2 pcs. - Number of shelves 1 pc. - Cylinder stroke 350 mm - Shelf opening 350 mm - Loading from all sides - Number of impression cylinders 6 pcs. - Diameter of pressure cylinders 85 mm - Power requirement of hydraulic unit 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity 22 KW - High-pressure insulating plates - Working temperature 90° C. - max. temperature 120° C. - Operating voltage 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and parallel guides at 2 corners of the press table made of self-lubricating material - Touch screen electronic control unit for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnosis and display of fault messages - Safety circuit with two-hand operation - Safety rip cord - Safety bracket for lower pressing table Hihrrbtoe Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold anodized heating plates (Busse) Location: From stock 54634 Bitburg - immediately available-

Condition: as good as new (ex-display), Year of construction: 2023, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Including 1 year warranty. Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to a maximum of 20 kg/h. *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear --- Options at extra charge: --Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically C7M2Mgj * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + 890 € net (delivery time then approx. 8 weeks) - Special pressing units + 2.950 € net ---

Condition: used, Year of construction: 2005, Briquette press POR A 100 N E2Popxe Year of construction 2005 Motor 7.5kW (10hp), 400V Diameter briquettes 65mm Max briquettes length 50/300mm Diameter inlet 1200mm Dimensions 1350*2115*H1700mm, weight 1000kg

Condition: used, Year of construction: 2005, Functionality: fully functional, Dimensions of the pressing plates 3,500 x 1,300 mm Uja7P2Rlit Total pressing pressure 150 to. Heating plates: Sandwich steel tube plates with thermal oil heating 8 pcs. Hydraulic cylinders diam. 85 mm incl. attached thermal oil heating system Safety ripcord shut-off Total electrical connected load: 21 KW Total height: 2.25 m

Condition: excellent (used), Year of construction: 2016, Spänex briquetting press SHB 60 K1, built 2016, first commissioning spring 2017, top condition, was serviced by Spänex at the previous owner, ready for immediate use. Press makes octagonal briquettes 135x85 mm, hydraulic motor 5.5 kw, pressing capacity approx. 60 kg/hour, depending on material. Control via Siemens PLC control and touch display, touch display was recently renewed. The press also has an oil preheater so that it can also be set up in unheated rooms. Uqwp92Qevp New custom-made chip container made of aluminum with very robust discharge and SEW gear motor, fully automatic operation possible, control of the discharge via press control and sensors on the drop chute (only runs when the drop chute is empty, clocked), press can also be installed directly under a silo / moving floor, for this purpose suction connections from Spänex have been installed at 4 points on the press. All parameters such as pressing pressure/discharge time/number of filling strokes, start-up control for suction, system settings etc. can be set via the display, as can the manual, semi-automatic, automatic and maintenance operating modes. Also included is an approx. 3 m long discharge channel for the briquettes. Incl. complete documentation (operating instructions and circuit diagrams) Press is connected and can be inspected and tested at any time. Price: 13.800 € net plus 19 % VAT.

Condition: good (used), Machine/vehicle number: Code: 0168, Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations 7R0Ioi0P7R Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Condition: used, Hydraulic cylinders horizontal, hydraulic cylinders vertical ----- Technical data ----- Press width: 3,500 mm, press height: 2,250 mm, Cylinder stroke: 200 mm, Doxvud Horizontal cylinder stroke: 80 mm, Total length: 4500 mm, Motor: 1.5 kW, space requirement (LxDxH): 4,500x850x3,000 mm Sold as is, without technical inspection

Condition: good (used), Used, good condition. *Options at additional cost, see below Delivery time appr. 14 weeks after ordering Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. E27N38Yny Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: used, Year of construction: 2009, Briquette press H&ouml cker Polytechnik BrikStar C 4-12-R Serial no. 183406 Year of construction 2009 Udlm0Yyv2R 4.0kW, 400V50kg/h Briquette diameter 65mm Dimensions: 1640x1260xH3600mm, weight +/-950kg

Condition: used, Year of construction: 2005, Functionality: fully functional, Dimensions of the pressing plates 3,500 x 1,300 mm Total pressing pressure 150 to. Heating plates: Sandwich steel tube plates with thermal oil heating 8 pcs. Hydraulic cylinders diam. 85 mm D7Vyzao incl. attached thermal oil heating system Safety ripcord shut-off Total electrical connected load: 21 KW Total height: 2.25 m

Condition: good (used), Code: 0158 Cudrksph Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: good (used), Code: 0332 Brand: AMASPRES (ITALY) Model: 3000 Membrane press Working size: mm 3000 x 1300 Opening mm 500 Working height mm 250 Cover opening and closing with vertical pneumatic pistons Mscbhlm2Ab This press is suitable for veneer of shaped pieces , such as window sash frames, curved pieces Upper heating with hot air Heating of lower side with hot air Consuption about 9 kwt Working cycle: about 10 min. Complete compressor for lifting of cover and under cover Processing prevacuum adjustable up to 6.5 atm The machine is equipped with time alarm, thermostat, thermometer, warning lights for calories and pumps Overall dimensions press mm 4100 x 1700 x 2050 h - Weight kg 1800 Overall dimensions depressor mm 1400 x 500 x 900 h - Weight kg 100

Condition: good (used), Code: 0328 Brand: SIMI Model: SI 3300 R92Wf0Cdv2 Hydraulic hot press complete with boiler for wood, custom-made furniture, panels, kitchens, composite materials, various materials Technical data: Platen dimensions mm 3300 x 1300 Max opening mm 450 Thrust ton 100 N° 3 pistons diameter mm 100 Double closing button Emergency perimeter rope Hot water platen heating Boiler Overall dimensions mm 4200 x 1400 x 2200 h Weight kg 4000

Condition: good (used), Code: 0342 Brand: ORMAMACCHINE - ITALY Model: NPC 45/20 - CE Standard Hydraulic hot press with diathermic oil - CE Standard Features: Structure entirely made of welded and tool machined beams Hydraulic system: the rams are thickness chromed to grant a perfect flowing and a higher working life either of the seal gaskets and of the piston itself Power unit with double pump Hydraulic power unit motor plunged in oil bath to get a better cooling and to reduce noise Automatic pressure recovery device to keep the same given pressure The switch board is mounted on a hinged door with 180° opening Technical data Platen dimensions mm 4500 x 2000 Platens in assembled and milled steel with mylar coating Opening between platens mm 400 N° 12 pistons Total thrust up to 200 ton Specific pressure up to 5 kg/cm2 Platen heating with diathermic oil 120 degrees by means of n° 3 electric boilers with partializer complete of circulation pump, connection pipes and expansion tank Double rack system Movable platen lock system in order to work with full safety in case of maintenance of the lower part of the press Gxcc7Ju Protection grids of the heating plant Safety switch in rope all around the machine in order to allow to stop the movement of the movable platen from any side of the machine Power unit motor Hp 3 Total power Kw 58 Overall dimensions of assembled machine mm 5550 x 2400 x 2800 h Overall dimensions for transport mm 5600 x 2300 x 2500 h Weight kg 13500

Condition: good (used), Code: 0229 Brand: POR Model: A 100N - CE Standard Briquetting machine for compacting various materials: wood sawdust, cork, polystyrene, polypropylene, polyurethane, rubber, plastic, yarn powders, leather powders, paper, coffee husks, etc. - CE Standard With covered suction filtering battery ASPIR MECC AM B/64 CS - CE Standard Technical data Briquette diameter mm 65 Max briquette length mm 50/300 Output m3/h 1,454 Motor Hp 10 Drum diameter mm 1200 Pump lt 50 Level sensor Inspection door Cooling unit Overall dimensions mm 2115 x 1350 x 1700 h Weight kg 1000 Covered suction filtering battery SPIR MECC AM B/64 CS - CE Standard - with 64 filtering tubes Flow rate m3/h 8500 Power Kw 0,18 Round attach with connecting flange Overall dimensions mm 2100 x 2100 x 2800 h Weight kg 650 Bkuw3Fhsbqq

Condition: good (used), Code: 0578 Brand: SORMEC 2000 - ITALY Model: 10000 - CE Standard Automatic cold press for panels, polyurethane foam, industrial shed doors, perimeter walls, foamed panels, insulation panels, laminates and various - CE standard Technical data: Working dimensions mm 10000 x 1500 Workpiece passage mm 2000 Opening mm 1000 Height of roller table mm 500 Motorised roller conveyor for workpiece feed with possibility of forward/backward movement N° 18 pistons diameter mm 70 N° 2 hydraulic power unit Pistons opening/closing selector Fddahtr3C Pressing timer Safety protection nets Power Kw 10,3 Compressed air 7 bar Overall dimensions: mm 10500 x 2300 x 3300 h Weight kg 19000

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Dlnjvr Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), Code: 0303 2Nwgco7Q Brand: BP BAIONI - ITALY Model: BP / C T / 70 - CE Standard Hydraulic hot press for wood, custom-made furniture, panels, kitchens, composite materials, various - CE Standard Platen size mm 3000 x 1300 N° 6 pistons Opening width mm 400 Platen heating by hot water Thrust ton 80 Emergency perimeter rope Overall dimensions mm 3400 x 1470 x 1900 h Weight kg 4000

Condition: good (used), Code: 0252 Brand: COLOMBO Model: 13/8 Cmvg7Pbh Presses (No. 2) suitable to bend different types of materials such as solid wooden strips and veneer - es: curved plywood, shells for chairs, seats, sofas, etc. - Equipped with with high-frequency generator The presses can work with mould and counter-mould or with steel-belt 1° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust.... Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h 2° Press Platen dimensions mm 1300 x 800 Opening mm 700 Thrust.... Piston diameter mm 150 Overall dimensions mm 2100 x 1000 x 2500 h High frequency generator GIORDANO COLOMBO Overall dimensions mm 1100 x 1100 x 1900 h

Condition: good (used), Code: 0011 Brand: ITALPRESSE Model: V/3 Sgklqdorq7 Mechanical cold press for gluing doors, furniture, panels, composite materials, technical materials, plastics, aluminium, various materials Platens size mm 3000 x 1200 Opening mm 650 n° 3 pressure screws Installed power Hp 1 Electrical up/down movement Overall dimensions: mm 3350 x 1200 x 1650 h Weight kg 1100