Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 23-07-12-045, functionality: fully functional, power: 7.5 kW (10.20 HP), saw blade diameter: 550 mm, table height: 910 mm, cutting width at rip fence: 1,000 mm, The machine is in very good condition with minimal signs of use! The machine was used for processing aluminum. TECHNICAL DETAILS Max. blade diameter: 550 mm Cutting width at CNC parallel fence: 1,000 mm MACHINE DETAILS Machine height: 910 mm Motor power: 7.5 kW Fpedpeytpxnefx Ag Djd EQUIPMENT Table extension (length: 840 mm) Double roller carriage (length: 3,000 mm) 2 pneumatic quick clamps (application range: 0-90 mm) Eye-level controls Template holder directly at the control panel Increased cutting height including blade tilting TIP-SERVO DRIVE CNC mitre fence UNO 90 Additional cross slide including connection Front support roller Air cushion table Spray device Note: The machine comes from a business closure, has been professionally dismantled and stored.

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Fpodpfxjyqydcj Ag Ded Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min MACHINE DETAILS Control system: Windows XP Machine programming software: OSI FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, main saw diameter: 315 mm, tool diameter: 315 mm, Equipment: CE marking, scorer, TECHNICAL DETAILS Main saw blade diameter: 315 mm Maximum tool diameter: 315 mm Fedpfx Ageyqyc Es Depd MACHINE DETAILS Circular saw blade units: 1 Connected load: 4 kW EQUIPMENT Scoring unit Tilting function CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documents. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8118

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Fpjdpfx Ajm Rhfdog Ded

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: Fedpfx Ajtqfv Ieg Dopd CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: used, Year of construction: 2000, functionality: fully functional, Robland Z320 Sliding Table Panel Saw - YoM: 2000 Machine is in well used condition, but fully working. Machine would benefit from a good clean. £1,500 (GBP) + VAT. 3200mm Sliding table saw. 1250mm Rip Fence x 3200mm Cross fence stops. Main Saw Blade Max Dia 400mm Scoring blade. Manual 0-45 Deg Blade tilt. Fpodpfx Agsynkm No Dod Manual Rise and fall on blade. Manual adjustment of the Scribing blade.

Year of construction: 2017, condition: used, Weight: 500 kg Dimensions (LxBxH): 720 x 185 x 163 cm - Machine available from: 2025-12-12 - Details: - └ Description: Machine is not working, needs new Stabilizer doppel, Schienenkopf, oil pump, chain and protective cover. Fedpjx Rycgofx Ag Dspd - Year: 2017 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 7.5 - Max. workpiece length [mm]: 7000 - Max. workpiece width [mm]: 1750 - Max. workpiece height [mm]: 1750 - Control: Manual - Voltage [V]: 400 - Power [kW]: 7.5 - Transport dimensions: 7200mm x 1850mm x 1630mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total height: 1,850 mm, total length: 950 mm, total width: 700 mm, Weight: 200 kg - Documentation available: No - CE certificate present: No - Serial number: 28359 - Saw direction: vertical Fodpoytbx Hjfx Ag Dopd - Max. total opening [mm]: 600 - Max. cutting height [mm]: 280 - Table length [mm]: 490 - Table width [mm]: 480 - Max. saw band width [mm]: 15 - Suction nozzle diameter [mm]: 100 - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 950mm x 700mm x 1850mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, total width: 1,600 mm, total length: 1,700 mm, total height: 1,700 mm, Weight: 500 kg Price: On request - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 15600600437 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 130 - Max. cutting width at 90° [mm]: 470 - Max. saw blade diameter [mm]: 550 - Saw blade tilt angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 1700mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Fjdpfx Agoytbgdj Dopd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total length: 5,450 mm, total width: 2,740 mm, total height: 1,590 mm, Weight: 750 kg Price: On request - Details: Fsdpfoyr It Iex Ag Dspd - └ Description: Slats of back wall are in poor condition - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 23677 - Max. cutting height vertical [mm]: 2060 - Max. cutting height horizontal [mm]: 1960 - Max. cutting width [mm]: 4300 - Max. cutting depth [mm]: 80 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 30 - Horizontal cutting: Yes - Vertical cutting: Yes - Transport dimensions: 5451mm x 2749mm x 1594mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: not inspected (used), Year of construction: 1998, machine/vehicle number: 13189, functionality: limited functionality, VERTICAL PANEL SAW WITH ELECTRIC MOVEMENTS & DIGITAL DISPLAYS FOR CUTS Brand: GMC MACCHINE SRL Model Type: KGS 660S Serial No.: 13189 Year: 1998 (Photos taken prior to any potential refurbishment, machine offered as-is) MACHINING CAPACITIES: Fodou R Ulhopfx Ag Djpd - Max. horizontal cutting length: 5300 mm - Max. horizontal cutting height: 2100 mm - Max. vertical cutting height: 2200 mm - Max. cutting depth: 80 mm OTHER FEATURES: - Power supply: 380V Three-phase+T - Installed power: 7.5 kW - Main motor power: 4.4 kW (6 hp) - Saw blade speed: 5,200 rpm Pneumatic blade feed - Carbide-tipped saw blade: Ø 300 mm, bore Ø 30 mm - Welded steel frame, PVC slat frame with automatic retraction via pneumatic cylinders - Fully lengthwise pneumatic retractable intermediate support with 2 adjustable and retractable stops - Retractable rollers for panel handling - Pneumatic locking of the saw carriage - 8 bar pneumatic feed - Digital display for cuts - Complete extraction system DPS Back cover spans the entire rear of the machine Lower longitudinal channel for sawdust collection Multiple extraction points in the lower section Extraction port: Ø100 mm - Support for floor-mounted installation - CE Marked Total space required when mounted on supports: 6300 x 1600 x 3040 mm (includes operator and maintenance area) Transport dimensions, 2 packages: . 1 frame 6300 x 860 x h.2620 mm . 1 pallet 3150 x 1000 x 1000 mm Total weight: 1250 kg Please contact us for supply of consumables, accessories, and/or extraction systems. Offered as a lot, without refurbishment or warranty. Ex works price, excluding VAT. Transport and services on request.

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: Fpsdpfxeygywue Ag Djd - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, total width: 5,100 mm, throat depth: 1,060 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor de contouren van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor de uitlijnen van het werkstuk - Maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rollenbaan is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine) Fpedpfx Agev Sfp Ae Djd

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), throat depth: 400 mm, Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Fpodpfx Ajxpymajg Dod Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm

Condition: ready for operation (used), total height: 1,400 mm, total length: 2,300 mm, total width: 2,300 mm, empty load weight: 2,000 kg, nominal power: 5 kW (6.80 HP), throat depth: 260 mm, cap round: dia 260 mm cap square: 260 x 260 mm Max height of workpiece: 260 mm Sawspeed: 17 > 120 m/min Length of band saw: 4100 x 32 x 1,1 mm Fjdpfxoxqr Urj Ag Dopd

Condition: good (used), Year of construction: 2005, machine/vehicle number: 05-01-540, functionality: fully functional, operating hours: 10 h, power: 5.5 kW (7.48 HP), cutting height (max.): 800 mm, cutting width (max.): 1,200 mm, saw blade diameter: 305 mm, tilt adjustment saw blade: 90 °, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, Equipment: rotational speed infinitely variable, saw blade guard, scorer, Great working saw Fodpsynf Uusfx Ag Djpd

Condition: used, Year of construction: 1998, Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: 6605/9-811 - Max. cutting height vertical [mm]: 1900 - Max. cutting height horizontal [mm]: 1800 - Max. cutting width [mm]: 4000 - Max. cutting depth [mm]: 40 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fsdsyrruvepfx Ag Dopd Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: At10548 Fedpfx Ajyrpmceg Dopd - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. Fsdpjxw Ii Sjfx Ag Djpd A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl Fpodjrx Tatjpfx Ag Djd - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification Fjdpev Aalyjfx Ag Dspd - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: new, Bandsaw HOLZKRAFT HBS 433 - Exhibition machine - Saw blade guide top, Saw blade guide at bottom, Quick clamping device via eccentric lever ----- Technical data ----- Rollers Ø: 430 mm, max. cutting height: 270 mm, max. cutting width with fence: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, Table size: 610 x 431 mm, Table inclination: -10 - +45 °, Motor 400 V: 1.5 kW, suction nozzle Ø: 2 x 120 mm, Fsdpfou R S Akex Ag Dspd Cutting speed: 900 / 450 m/min, Dimensions (LxWxH): 768 x 512 x 2,048 mm, Weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm - new exhibition machine -

Condition: new, HOLZKRAFT sc 2c sliding table saw - Exhibition machine - pivoting, Fodpfxou R Sy Ns Ag Djpd rip fence with fine adjustment ----- Technical data ----- Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Speeds: 4,000 rpm, max. saw blade Ø: 315 mm, Cutting width with rip fence: 900 mm, Cutting height 90/45°: 100 / 79 mm, cutting length: 1,600 mm, Swivel range: 90 - 45 °, Dimensions (LxW): 1,020 x 325 mm, Weight: 295 kg - new exhibition machine -

Condition: new, HOLZKRAFT sc 3c 26 sliding table saw - Exhibition machine - pivoting, rip fence with fine adjustment ----- Technical data ----- Trimming length: 2,600 mm, max. cutting height 90°: 100 mm, max. cutting width to the left of the saw blade: 2,310 mm, Cutting width with rip fence: 900 mm, Fpsdpsu R S Dhsfx Ag Dsd max. saw blade Ø: 315 mm, Main saw blade speed: 4,000 rpm, Motor power 400 V: 5.0 kW, Extraction nozzle Ø: 120 / 60 mm, Work table height: 900 mm, Table dimensions: 840 x 560 mm, Format sliding carriage dimensions: 270 x 124 x 2,600 mm, Transport width: 900 mm, Weight: 385 kg - new exhibition machine -

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position Fjdpownrf Usfx Ag Djpd - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -