Used carcase presses for sale (35)

Condition: used, Year of construction: 2005, Biesse Comil Cosmo NK Corpus press Year of manufacture: 2005 Press dimensions: 2500 x 1300 mm Press cycle: Automatic Press type: Motorized Motor power: 3.7 kW Press pressure: 12,000 N Ijdsywxzzspfx Am Ietf (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Through-feed System (of the furniture cabinets) Electro-mechanical pressing system Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Total lenght of the Press Clamp (mm) 4400 approx Electronic programmer PLC «OMRON» Total installed power (Kw) 8,8 approx With in-feed conveyor (motorized belt) With out-feed conveyor (motorized belt) Itjdpfxjyzh I So Am Ijf SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Minimum depth (Width) of the furniture cabinet (mm) 250 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200

Condition: excellent (used), Hess Corpus Press Type: Export, Pneumatic Manufacturer: Hess Type: Export Maximum workpiece size: 2,500 x 1,500 mm Press force: 1,400 kp pressing capacity per pressure unit at 15 bar Vertical cylinders: 2 + 2 pressure cylinders Horizontal cylinders: 2 + 2 pressure cylinders Dimensions: 3,900 mm x 2,500 mm x 600 mm Weight: 1,060 kg Isdpfxexgvwpe Am Ijtf Hess Corpus Press Export, pneumatic 2 vertical pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar 2 horizontal pressure assemblies, each with 2 pressure cylinders, 80 mm cylinder diameter, 110 mm stroke, 1,400 kp pressing force per pressure unit at 15 bar; the upper unit is easily adjustable thanks to weight compensation Pressing operation is controlled via 2 rotary slide valves with positions Press – Stop – Release Maintenance unit consisting of pressure regulator (0–15 bar), pressure gauge, and oil mist lubricator Anodized measuring scales, detachable feet Location: Ex works customer site - Immediately available -

Condition: good (used), Code: 0278 Brand: COMIL BIESSE Model: COSMO Self-adjusting clamp press for furniture, furnishings, kitchens, bathroom furniture and various Working length max mm 2500 Working height mm 1200 Working width mm 700 Positioning speed 3,5 mt/min Total power Kw 3,7 Isdpfx Ameyyzvge Ietf Overall dimensions: mm 3760 x 920 x 2280 h Weight kg 2200

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Itsdpfxevvkl Dj Am Ief Storage location: Nattheim

Condition: excellent (used), functionality: fully functional, planing width: 630 mm, rotational speed (max.): 5,500 rpm, overall weight: 1,100 kg, working width: 630 mm, height adjustment type: mechanical, planing height: 200 mm, Thickness planer Dornburg, model DD 63. Robust thickness planer (cast iron), table length approx. 1050 mm. Planing width approx. 630 mm, maximum clearance height 200 mm. Cutterhead equipped with 4 strip knives. Motor 5.5 kW, speed 5500 rpm. Feed rate 18 m/min. Dimensions approx. 1100 x 1300 x 1600 mm (LxWxH). Weight approx. 1100 kg. Itjdpfx Aewtqzrom Isf

Condition: excellent (used), Year of construction: 1991, machine/vehicle number: 211/91/1, functionality: fully functional, input current: 16 A, input frequency: 50 Hz, table width: 750 mm, table length: 2,700 mm, total length: 3,650 mm, total width: 850 mm, total height: 2,300 mm, overall weight: 2,200 kg, lifting height: 1,350 mm, working width: 750 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 750 mm, workpiece height (max.): 1,300 mm, height adjustment type: electric, space requirement height: 2,300 mm, space requirement length: 3,650 mm, space requirement width: 950 mm, working length: 2,500 mm, - Lamella - carcass press - Working area: - Width from 150 - 2,500 mm, height from 150 - 1,300 mm; depth 750 mm; - 2,200 daN (kg) - The pressing force is adjustable to 85% + 70%. - Very robust machine Isdpfx Ajyx Habom Ijtf

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 170 590, functionality: fully functional, input current: 16 A, input frequency: 50 Hz, table width: 700 mm, table length: 2,700 mm, total length: 3,400 mm, total width: 950 mm, total height: 2,300 mm, overall weight: 1,800 kg, working width: 700 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, workpiece height (max.): 1,400 mm, height adjustment type: electric, working height: 1,400 mm, working length: 2,500 mm, Gannomat Concept 70 Lamella - Carcase Press Working area: Width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Pressing force for horizontal pressure beam min. 500 daN (kg), continuously adjustable up to max. 2,200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg), continuously adjustable up to max. 2,200 daN (kg) Itjdpfoyx E Scex Am Iof

Condition: used, Year of construction: 1989, Working dimensions 3000 x 1250 x 650 mm Cylinder stroke 110 mm Machine dimensions 3240 x 2120 x 770 mm Weight approx. 900 kg Ijdpfx Aexu Egvem Iotf

Condition: good (used), ZIM Hülsta cabinet press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser. no.: 380125028 Carcase max. 260 x 1100 mm 2 supports at the bottom, movable 2 press bars at top, movable Beckoff control panel Roller conveyor 4500 x 600 mm Itsdpfjvdbv Aox Am Ijf Roller width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, length 2.300 mm width 800 mm height 2.700 mm Itsdpfxjt H Tuxe Am Ief dimension of workpiece max. 1.300 x 700 x 1.450 mm Pneumatic body press or gluing press for pressing furniture bodies or similar items.

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Itjdpeb Eln Defx Am Isf Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Itedpfx Amjw Sgnke Isf Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Itsdpfeiidm Njx Am Iof Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1999, Maximum Press measure : L 2500 x H 1500 x W 700 mm Electric upper beam ( Up/down ), with 3 x 2 hydraulic pistons. Manual side beam with pneumatic lock, 2 x 2 hydraulic pistons Emergency wire stop + emergency push button. Iedpfx Amsygyfxj Ietf CE marked

Condition: new, machine/vehicle number: 22069, input voltage: 400 V, input frequency: 50 Hz, total length: 36,600 mm, total width: 9,400 mm, total height: 23,000 mm, overall weight: 2,100 kg, working height: 420 mm, The electro-mechanic case clamp VK011 allows a fast assembly of cabinets without having to make pre-adjustments on the clamp. The strong clamping plates of the VK011 enable all-over clamping of the cases to achieve the highest quality results. A clamping power of up to 2.300 kg can be generated in the press. - Vertical press plate (150 x 50 mm) - Horizontal press plate (150 x 50 mm) - Preselection of pressing time - Max. pressing pressure 1,800 kg (horizontal), 2,300 kg (vertical) - Machine operation via joystick - 2-hand operation Advantages: Itjdpegqfpfofx Am Ijf - High flexibility:Pressing pressure is variably adjustable. Great variety of different cabinet dimensions possible - Maximum output due to positioning speed of up to 54 mm/sec (ECO up to 29 mm/sec) - Intuitive operation via joystick - High safety standards due to CE-conformity e.g. 2-hand-operation, security fence etc. - Sturdy design, linear guides and ball screws lead to the highest precision - Plug & Play

Condition: used, Year of construction: 1993, used, in excellent condition Brand: Hess Model: Express Year of manufacture: 1993 Machine no.: 100914/28 Cylinders per press element: 2 - 110 mm stroke Number of press elements horizontal: 3 Number of press elements vertical: 3 Working width: 2500 mm Working height: 1350 mm Press depth: 600 mm Pneumatic Height adjustment: electric Space requirement approx. 3600 x 800 x 2450 mm Weight approx. 1200 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Ijdpfx Amsxuv N Uo Ijtf Delivery in current condition as inspected, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 941, functionality: fully functional, working width: 600 mm, working height: 1,350 mm, working length: 2,500 mm, TECHNICAL DETAILS Itsdpfx Amexnyg Rs Ijf Pressing length: max. 2,500 mm Pressing height: max. 1,350 mm Working depth: max. 600 mm MACHINE DETAILS Electrical data Rated voltage: 3/N/PE/400 V Rated current: 11 A Rated power: 4.7 kW Frequency: 50 Hz EQUIPMENT Vertical and horizontal press beams operated electromechanically Pressure build-up via frequency-controlled geared motors Vertical and horizontal press pressure adjustable separately Pressing time adjustable

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Iodpfx Ajuf Hx Hom Istf Storage location:

Condition: excellent (used), Through-feed System (of the furniture cabinets) Mechanical pressing system (with asynchronous motors + inverter) Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Total lenght of the Press Clamp (mm) 4500 Movable vertical pusher and Movable horizontal pusher SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Itjdpfx Amogz Acao Iof Minimum depth (Width) of the furniture cabinet (mm) 200 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200 Motorized in-feed carpet to the Press Clamp Length of the carpet in feeding to the Press Clamp (mm) 2500 Electronic programmer PLC (Separate electric and command cabinet) Total installed power (Kw) 7 Stapling Gun E/S 250 (Automatic)

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) Itedpfxjlkbn Is Am Isf C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: 221/93, functionality: fully functional, Connection value 380V 16A Pneumatic connection 6 bar Total length of the machine 4300 mm Total machine width 1300 mm Itedpok Tzwdofx Am Ijf maximum pressing length 2650 mm Press width 1000 mm Press height 1000 mm Press pressure up to 150 bar electrical width adjustment with digital display Footswitch for pressing

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 Itedpfx Ajhwwnrom Isf year 1997 S/N 978612997 working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm 12 pcs supports 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg technical information under subject of correction

Condition: excellent (used), Year of construction: 1998, I sell the corpus press for furniture boxes assembly RAMARCH PN31, year 1998. Itedpfx Aeh Iahgom Ijf Material size 2500 x 1300 x 600mm Electropneumatic operation. Producer: RAMARCH, Spain. (nowadays DYNMA) Very good condition. Avialable immediately.

Condition: excellent (used), Year of construction: 2002, I sell the corpus press for furniture boxes assembly RAMARCH PN31, year 2002. Material size 2500 x 1300 x 600mm Electropneumatic operation. Producer: RAMARCH, Spain. (nowadays DYNMA) Itodpfxeh Iahcj Am Isf Very good condition. Avialable immediately.