Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Gslhcez Ekkxjcqljkc Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 300 mm, type of input current: three-phase, workpiece width (max.): 220 mm, This machine is in very good condition, was not used as much as anticipated. Gslhozifmleccqljkc

Condition: like new (used), Year of construction: 2020, operating hours: 20 h, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, Thicknesser T45 by Martin with Spiral cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, reading via digital display with 1/10 mm accuracy and positioning control The control system also offers the possibility of incremental adjustment. Furthermore, 99 fixed values can also be stored as a program. Drive motor 10 kW with automatic motor brake Spiralcutterhead Feed speed 6 + 12 m/min Rubberized infeed roller 2 pice Rubberized outfeed roller Planed machine table guided on four lead screws and guides for optimal stability Golhcez R Nqqecqlokc Low-noise design with soundproof hood Dust extraction connection 160 mm Emergency stop at the front and rear Operating manual CE marking Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. Transport throughout Europe can be arranged at a good price.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle diameter: 40 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, input voltage: 400 V, number of spindles: 5, table width: 230 mm, Equipment: motor brake, The machine was installed at the plant in 2024. The planer was purchased by us as new and installed at the plant in January 2024. Due to a change in the technological requirements of our production, it was replaced with a different model. The reason for the sale is a change in the plant’s needs. The machine is in very good technical condition and ready for operation. Gkelhccjz Rz Hvoqlsc

Condition: used, Year of construction: 2015, Four-knife 120 mm cutterblock Four selectable feed speeds Heavy cast iron construction Precision thicknessing table with central column guidance Gslhoz N Hfbeccqlekc 520 mm working capacity 2015 CE

Condition: used, Year of construction: 2008, machine/vehicle number: MC00094230, functionality: unexamined, input voltage: 400 V, Equipment: CE marking, Thickness planer MAKA / GRIGGIO DH 520/A Year of manufacture: 2008 Machine number: MC00094230 Condition: Uninspected Delivery terms: Free on truck Location: 72178 Waldachtal Availability: Immediately - by arrangement Gkeljz Rqgxshccqlsc Payment terms: Prepayment - by bank transfer Internal No.: 180-2 Technical data: - Planing width approx. 520 mm - 400 V - 50 Hz - Max. 8.85 kW - Max. 2900 rpm Scope of delivery: - Without additional accessories Dimensions & weights: - Installation dimensions L x W x H approx.: 1300 x 800 x 1400 mm - Weight approx.: 785 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►On request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of all warranties. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: M205M410, working width: 230 mm, planing height: 160 mm, planing width: 230 mm, working height: 160 mm, overall weight: 3,800 kg, workpiece height (max.): 160 mm, type of input current: three-phase, workpiece width (max.): 230 mm, input voltage: 400 V, number of spindles: 5, input frequency: 50 Hz, For sale is a professional four-sided planer WINTER TIMBERMAX 5-23. The machine was only used sporadically for our own production and was not operated in continuous multi-shift operation. Technical data: - Manufacturer: WINTER Holztechnik GmbH - Model: TIMBERMAX 5-23 - Year of manufacture: 2017 - Serial number: M205M410 - 5 spindles - Processing range: 20–230 x 8–160 mm - Feed rate: 6–36 m/min - Supply voltage: 400 V - Frequency: 50 Hz - 3-phase Gslhoz Rpd Aoccqlokc - Maximum power: 37.43 kW - Weight: approx. 3,800 kg - CE marking - Also suitable for processing damp wood The machine is fully functional. The machine is located in Poland, 64-920 Piła. An inspection and demonstration of the machine is possible by prior appointment. Further photos, technical documentation and a video of the machine in operation can be provided upon request.

Condition: used, Year of construction: 2018, total width: 900 mm, total height: 1,250 mm, Colour: Grey Weight: 800 kg Dimensions (LxBxH): 130 x 90 x 125 cm - Details: - └ Description: New engine installed - Year: 2018 - CE marking present: Yes - Serial number: 63CE00007-8 - Main motor power [kW]: 7.5 - Max. planing width [mm]: 630 - Min. planing height [mm]: 2 - Max. planing height [mm]: 288 - Planing shaft speed [rpm]: 4500 - Worktable length [mm]: 860 - Worktable width [mm]: 630 - Planer block diameter [mm]: 100 - Cutter type: Tersa - Number of cutters [pcs.]: 4 - Number of cylinders height adjustment [pcs]: 4 - Extraction nozzle diameter [mm]: 160 - Max. feed speed [m/min]: 18 - Height adjustment: Manual - Options: Digital readout, Braked motor - Min. feed speed [m/min]: 6 - Max. feed speed [m/min]: 18 - Voltage [V]: 400 - Current consumption [A]: 17.5 - Fuse [A]: 32 - Power [kW]: 7.5 - Transport dimensions: 1300mm x 900mm x 1250mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Golhez Rzkboccqlokc Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, Thicknesser T45 by Martin with Tersa cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, reading via digital display with 1/10 mm accuracy and positioning control The control system also offers the possibility of incremental adjustment, i.e., you can, for example, set a value of 1 mm and then, by repeatedly pressing the start button, change the planing height by 1 mm each time without having to set a new absolute height each time. Furthermore, 99 fixed values can also be stored as a program. Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead with new knives Feed speed 6 + 12 m/min Rubberized infeed roller Rubberized outfeed roller Planed machine table guided on four lead screws and guides for optimal stability Low-noise design with soundproof hood Dust extraction connection 160 mm Gelhcoz Icvlscqljkc Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Only 137 operating hours, i.e., only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider."

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2201010, Four-sided planer Leadermac Compact LMC-530C with 5 spindles, year of manufacture 2022. Working width 15 - 300 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm with sequential feed), infeed table 2500 mm. Spindles: 15 HP, 10 HP, 10 HP, 20 HP and 20 HP, diameter 50 mm, 6,000 rpm. Feed motor 7.5 HP, 6 - 24 m/min. Schneider 5.7-inch touchscreen EASYSET with NC control of axis 3 (left radial), axis 4 (top radial) and height adjustment of the pressure bar. Pneumatic left side pressure roller, two-part pressure shoe, extra table and anti-kickback device for multiple sawing. Gjljz Ngiyjhccqlokc

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 2105025, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Compact LMC-523C with 5 spindles, manufactured in 2021. Working width 15 - 230 mm, working thickness 10 - 150 mm, minimum piece length 800 mm (300 mm for sequential feed). Spindles: 3 x 7.5 HP and 2 x 10 HP, spindle speed 6,000 rpm, spindle diameter 40 mm. Feed motor 5 HP with inverter, feed speed 6 - 24 m/min. Fully enclosed machine with sound insulation, chrome-plated feed table, pneumatic pressure rollers with 3 adjustment positions, and a solid cast iron frame. Connection 380 V / 50 Hz, CE version. Options: infeed table 2.5 m (instead of 2 m), pneumatic side pressure roller on the left spindle, split pressure roller at the top, additional tables for multiple sawing on the 2nd bottom spindle, anti-kickback device, and Schneider Easyset touchscreen (1 x conventional and 2 x NC). Golhccqjz Ngitslokc

Condition: like new (used), Year of construction: 2021, number of spindles: 5, Technical Specifications Four-sided planer KUPER SWT XL-5 Manufacturer: KUPER – Heinrich KUPER GmbH, Germany Model: SWT XL-5 Year of manufacture: 2021 Supply voltage: 400 V Frequency: 50 Hz Power supply: three-phase Rated current: 63.1 A Electrical diagram number: K810-03146 Intended use: planing and profiling of solid wood components, including boards, strips, and other profiled elements. Technical condition: like new, requires minor refurbishment. It has only produced approximately 100 m3 of paneling profiles. I also have a cutting/end-trimming machine listed in another offer. Gjlhccoz N Apijqlokc

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 2205027, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, input current: 72 A, Four-sided planer Leadermac Smartmac LMC-423S with 4 spindles, manufactured in 2022. Equipped with an extended infeed table of 2.5 m (instead of 2 m) and a Schneider Easyset touchscreen control. Gelhjz Ngimoccqlskc

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, planing height: 150 mm, spindle diameter: 40 mm, planing width: 230 mm, total height: 2,000 mm, total length: 7,600 mm, overall weight: 6,500 kg, workpiece height (max.): 150 mm, workpiece width (max.): 230 mm, number of spindles: 8, Leadermac, Hypermac 823 8 spindles Planing width 15–230 mm Planing thickness 10–150 mm Minimum workpiece length 200 mm Spindle speed 6000 rpm Spindle diameter 40 mm Permitted saw circle – vertical spindle: 112–232 mm, horizontal: 100–225 mm Feed speed 6–24 m/min 6500 kg Length 7600 mm Height 2000 mm Depth 2000 mm Golhccqjxmlk Solskc 400 volt Manual in Dutch and English

Condition: excellent (used), Catalog number: 8124 TECHNICAL DATA - Shaft width: 510mm - 4-knife shaft - Max. thickness of workpiece on thicknesser: 200mm - Max. thickness of workpiece on side heads (3-sided): 100mm - Top: - Pawls - Toothed infeed shaft - Pressure roller - Planing shaft - Smooth outfeed shaft - Bottom: - Guide strip - Adjustable rollers in the lower table, 2 pcs - Rear: - Side spindles + pressure roller, 2 pcs - Spindle height: 100mm - Spindle diameter: 30mm - Adjustable spindles (left/right) - Side spindle motors: 2 x approx. 1.5kW - Main motor: 7.5kW - 2 types of feed speed Golhcez Rpkcecqlokc - Dust extraction port: 2 x 100mm, 1 x 120mm - Overall dimensions (L/W/H): 1700x1300x1160mm - Weight: 1103kg ADVANTAGES - Polish-made - Shaft with 4 knives - Used planer, very good condition Net price: 14900 PLN Net price: 3470 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2018, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, overall weight: 1,100 kg, Felder Format-4 Thicknesser, model Exact63 – featuring Silent-Power spiral cutterblock and Digi-Drive. A high-quality industrial thicknesser from Austria, engineered for high precision, efficiency, and continuous operation. The machine combines robust construction with advanced technology and excellent ease of use—ideal for professional joinery workshops and industrial woodworking. Equipment and features: *Silent-Power spiral cutterblock – for efficient planing and a superior surface finish. *Digi-Drive digital table height adjustment – ​​simply enter the desired dimension, press start, and the table automatically adjusts to the exact height. *LED display – shows the set value and current table height. *4 programmable settings – for smooth and efficient operation. *Variable feed speed, 5–20 m/min – adjust the speed to suit the desired result, ranging from a fine finish to rapid material removal. *Table extension – provides better support when handling longer workpieces. *Segmented infeed roller. *Additional outfeed table. Benefits: High precision and consistent planing results. Robust construction with high-quality components. High productivity during continuous operation. Advanced technology and user-friendly operation. Specifications: Working width: 630 mm Maximum planing height: 3–300 mm Motor power: 10 hp Feed speed: 5–20 m/min Golhoz R I Saeccqlekc Year of manufacture: 2018 Premium machine in near-new condition. Transport across Europe can be arranged at a good price.

Condition: used, Year of construction: 1991, Working width: 510 mm Planer cylinder: Strip cutter Number of cutters: 4 Jointer table length: 2200 mm Adjustable jointer fence angle: yes Folding up the jointer table: manual Maximum feed thickness for thicknesser: 240 mm Height adjustment of thicknesser table: electric Indication of planing thickness: scale Feed rate: 7 / 14 m/min Infeed roller: steel, ribbed Outfeed roller: rubber Table rollers: yes Motor power: 5.5 kW Motor brake: yes, automatic Dust extraction port: 160 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 1050 Gslhccjz I Iugoqlekc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, WEINIG Powermat 700 Planing and Moulding Machine Year of manufacture: 2020 Tool configuration: 018 (b-r-l-t-t-b) 1st bottom spindle: 7.5 kW, 6,000 rpm 2nd right spindle: 15 kW, 8,000 rpm 3rd left spindle: driven together with right spindle, 8,000 rpm 4th top spindle: 11 kW, 8,000 rpm 5th top spindle: 7.5 kW, 8,000 rpm 6th bottom spindle: 7.5 kW, 8,000 rpm Feed motor: 5 kW Infinitely variable feed speed: 5 - 40 m/min Total connected load: 56.5 kW Equipment: - Comfort Set - Electronic digital readouts - Rebating unit - MarathonCoating table insert in front of first spindle - Quick-adjustable fence lip after right spindle - Pressure roller above, opposite right spindle, swing-away and spring-loaded - Reduced roller spacing opposite right spindle - Extension of pendulum axis opposite left spindle up to 150 mm - CNC control for dimension adjustment (thickness and width) - Split pressure shoes before 1st and 2nd top spindles - Frequency inverter for smoother motor start-up and stop - Pneumatically controlled feed roller before 1st bottom tool (raise/lower) Golhoyh Rhwjccqljkc - Climate control unit for control cabinet - Short infeed table, 1.20 m long, with 2 driven rollers above table and 1 driven roller in the table - MemoryPlus with 10.1-inch display

Condition: ready for operation (used), power: 11 kW (14.96 HP), planing width: 810 mm, number of blades: 4, For sale is a robust Panhans thickness planer, model DH 810, featuring a large planing width and a clear digital display for the planing depth. Technical data / Equipment: + Planing width: 810 mm + Motor power: 11 kW + 4-knife planing shaft + Digital display for the set planing depth + Two rollers in the thickness table to assist with workpiece transport + Robust, heavy-duty construction Gslhcsz I T Daocqljkc Inspection and test run possible by arrangement in Haldensleben. Invoice with VAT shown. Transport can be arranged for an additional charge.

Condition: used, Year of construction: 1992, Weinig UNIMAT 17 A comb, 6 spindles + universal, with pneumatic feeder for long pieces, functional, used. Gkelhcoz I Thljcqlec Optionals: code 926030 Return belt from 5500 mm with stacking unit 4-piston pneumatic ejector code 926031

Condition: used, Year of construction: 1993, machine/vehicle number: H3186, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 510 mm, number of blades: 4, actuation type: electric, Thickness planer with a working width of 510 mm, featuring a Tersa cutterhead, electrically adjustable working height, and a feed rate with 4 settings. Gelhccqez Nhg Hsljkc

Condition: used, Year of construction: 1997, Working width: 500 mm Gkelhccsz I Iumjqloc Planer cutterhead: Strip cutter Number of cutters: 4 Length of surfacing table: 2800 mm Adjustment of surfacing table: Lever Indication of chip removal: Scale Adjustable angle of the fence: yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: ab/174978, overall weight: 2,950 kg, total height: 1,650 mm, total width: 1,700 mm, rotational speed (max.): 6,000 rpm, planing width: 230 mm, input voltage: 380 V, number of blades: 4, total length of planing tables: 4,700 mm, type of input current: three-phase, year of last overhaul: 2023, actuation type: electric, Equipment: CE marking, documentation/manual, four-sided planer SCM Superset XL Comp 6 documentation available, minimum/maximum planing dimensions width 25 to 230 minimum/maximum planing dimensions height 6 to 120 1x planing spindle 10 hp, sanding spindle 10 hp, width spindle 10 hp, thickness spindle 15 hp, additional spindle 10 hp, universal spindle 10 hp including planing heads/quick-change system, infeed table 2500, automatic height and width adjustment, with memory capacity for 99 programs Gslezwf Ekohccqlokc manual central lubrication system, Waxelite pump, including dust extraction pipes up to and including automatic sliding dust collector year of manufacture 2005, machine available for pick-up, currently available, price €17,500 excluding VAT

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Golhccsxyu Itjqlskc

Condition: excellent (used), Catalog number: 8118 TECHNICAL DATA PLANER: - cutterhead width 410mm - 3-knife cutterhead - adjustable angle guide - table length 1800mm - both tables adjustable JOINTER: - max thickness of workpiece on the jointer 180mm - cutterhead guard * from top to bottom: - infeed rollers - toothed infeed roller - planing roller - smooth outfeed roller * with horizontal drilling machine: - max tool diameter 16mm - max hole depth 120mm - max milling length 200mm - feed adjustment (front/back) with drilling machine - table adjustment (up/down and sideways) - adjustable roller in the lower table - 2 feed speed settings 8/12m/min Golhcsz Nkbyocqlskc - main motor 4kW - dimensions (L/W/H) 1800x1350x1150mm - weight 650kg Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)