Used veneer presses for sale (140)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, A very good machine with the benefit of the infeed table and outfeed exit table, which saves significantly on labour. Podpfx Aozifpgsdzsra

Condition: refurbished (used), Year of construction: 1983, machine/vehicle number: 11549, functionality: fully functional, power: 12.8 kW (17.40 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 120 t, table width: 800 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,000 mm, year of last overhaul: 2024, Press 1600x800 mm – 120 T Press force: 120 T Dimensions: 1600x800 mm Vertical opening (daylight): 1040 mm Pjdeztxliopfx Adzora Machine number 11549 Year of manufacture 1983 Busse electric heating plates (2024) - 12.8 kW electric - Maximum temperature: 180 °C Inspected by DV Hydraulics in 2024

Condition: like new (used), functionality: fully functional, HOT PRESS with electric heating of plates , model ORMAMACCHINE NPC/E/DIGIT6/90 second hand machine working condition: excellent for wood, corian, joinery, furniture, custom furnishings, panels, doors, composite materials, and more maximum temperature: 130°C CE-certified machine plate dimensions: mm. 2500 x 1300 electric plate heating n.6 pistons, diameter: mm.70 opening: mm.400 Prodpfszwphpjx Adzja total thrust: 90 tons pressure: 3.3 kg/cm2 n.4 racks for smooth movement of the lower plate hydraulic motor power : Hp 2 electric plates: Kw 17,8 overall dimensions: 3300 x 1550 x 1900 mm weight: 2800 kg volts 400/50 total installed electrical power Kw 22,5 the plates are composed of a chipboard support and a 12 mm thick aluminum plate containing the heating elements. the Digit series is equipped with an electronic control panel for managing the pressing parameters (temperature, pressure, and closing time)

Condition: excellent (used), Great deal, in excellent condition, 2550/1300, from a Swiss liquidation sale. 6-cylinder engine, electric heating plates, 98-ton capacity, safety cable. Podpezw Udcjfx Adzera

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 400 mm, table width: 1,200 mm, table length: 2,550 mm, clearance between the columns: 650 mm, total length: 1,400 mm, total width: 3,000 mm, total height: 1,930 mm, overall weight: 3,400 kg, This OTT veneer press from the Junior series, model 2512, with 6 pressure cylinders, is a classic hydraulic heated platen press for carpentry and woodworking. It has been completely overhauled by the Ott factory. 6 hydraulic pressure cylinders ensure extremely even pressure distribution over the entire surface, which is particularly important for demanding veneer work to prevent bonding errors. The use of 6 cylinders (instead of the often standard 4 cylinders for this length) minimizes the deflection of the press plates. This also allows for the pressing of smaller workpieces with high specific pressure without the plates warping. It is equipped with electric aluminum heating plates (gold anodized). The machine is connected and can be tested. Sale B2B without warranty/guarantee. Psdpfx Aezv U Hzedzera

Condition: ready for operation (used), Year of construction: 1988, Langzauner SF 120 Veneer Press 120 tons pressing force 8 cylinders Pedjztn Aqjpfx Adzsra 80 mm diameter Opening width 400 mm Connection value per plate 11.5 kW Weight 6100 kg Space requirement 3730 x 1550 x 1970 mm Temperature 130° C Year of manufacture 1988 Heating plates Goldeloxal. Note: the plates are not in good condition. Dent on the lower plate in the rear right section. Price 11,000.- Price with new Elkom Goldeloxal plates 17,000.-

Condition: excellent (used), Year of construction: 1989, Veneer press Predpfjztnhmjx Adzja Manufacturer: Bürkle Type: U60 Year of manufacture: 1989 Plate dimensions: 2,200 x 1,250 mm Opening width: 400 mm Pressing pressure: 60 tons Specific pressing pressure: 2.2 kg/cm² Heating: Electric Motor power: 0.75 kW Emergency stop device: Emergency stop cable Weight: 3,000 kg Dimensions: 2,750 x 1,380 x 1,785 mm

Condition: used, Platen press, 1300x2500 mm, 20/26. Predpfozvmkxjx Adzoa

Condition: used, Year of construction: 2004, functionality: fully functional, ORMA NPC-4-70 Shelf Press – after technical inspection, ready for operation Specification: • Condition – used, fully serviced • Manufacturer – ORMA • Model – NPC-4-70 • Shelf dimensions: 250 x 130 cm • Max. clearance between shelves: 480 mm • Shelves are straight, clean, with no dents/damage • 4 cylinders with 70 mm diameter • Max. pressure: 300 bar • Max. pressing force: 70 tons • Automatic pressure compensation in case of pressure drop • Shelves convertible for water/glycol or oil heating • Circulation pump and heating boiler included • Maximum power consumption: 20 kW • Equipped with safety pull-cord • Original paint finish • Weight approx. 3,000 kg • Year of manufacture: 2004 • Overall dimensions: 310 x 190 x 210 cm (L x W x H) Additional Information: • Good technical condition, after complete seal replacement • Photos show the actual item for sale • Possibility to power on and inspect the machine on site • Auction price excludes VAT and transport costs Financing & Transport: • We organize transport using MDD fleet, courier services, or external carriers • Financing options available through leasing or lease-loan arrangements Pedsyxdluspfx Adzsra

Condition: excellent (used), Shelf length: 225 cm Shelf width: 135 cm Maximum heating element height: 40 cm Maximum temperature: 120 °C Total power consumption: 14 kW Prjdpfjzvnq Hex Adzja

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. Predpfx Aozuzw Dedzea HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm Prjdpfxjzfgare Adzoa 6 hydraulic cylinders, 75 mm Clearance: 400 mm Water heating Year of manufacture: 2001 Weight: 3200 kg Overall length: 440 cm Overall width: 190 cm

Condition: good (used), Year of construction: 1982, A well-maintained Joos veneer press is for sale. Available from the end of June/beginning of July. Machine details: Press area: 2550mm x 1350mm Pressing force: 900kN Psdszczqnepfx Adzsra Press chamber height: 400mm Number of cylinders: 4 Weight: approx. 3100kg Electric heating plates Operating pressure: 355 bar Gold anodized surfaces.

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Psdpeyxp Twsfx Adzsra Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Year of construction: 1978, used good condition cleaned Prjdpfx Aezkl Ifodzoa functionality tested Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Piston diameter: 70 Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Weight approx. kg: 4000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: excellent (used), Shelf dimensions: 130 cm width, 255 cm length. Prjdpfx Adjzimiuezea

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Shelf length: 3100 mm Shelf width: 1300 mm Prsdpfeztcuzox Adzoa Clearance between shelves: 44 cm Number of pistons: 6 Hydraulic heating Safety cut-out with shear pin Year: 2015 Capacity: 5000 kg Power: 4 kW CE marking

Condition: used, Year of construction: 1982, Pressing area: 2200mm x 1100mm Opening: 400mm Prjdpfszhm Dvjx Adzja Heating: electric Platen surface: aluminum Emergency stop: yes, pull-cord Pressing force: 60 tons Number of cylinders: 4 Power consumption: 16kW Machine length: 2500 mm Machine width: 1300mm Weight: 3000kg

Condition: excellent (used), functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm Podpfoztpwcsx Adzsra Number of pistons: 6 Water heating Safety switch with shear pin

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm Prsdpfx Aey N Rchsdzsa plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm pressure 3kg/cm2 pump motor power 2,2kW

Condition: excellent (used), Year of construction: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control system - Electric heating platens 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs. - Number of levels: 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-around loading possible - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V, 50 Hz - Safety specifications according to CE standard Standard equipment: - Movement of the press table with rack-and-pinion and parallel guides at 2 corners of the press table made from self-lubricating material - Electronic control unit with touch screen for machine control and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for adjusting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Safety pull cord - Safety support for lower press table Psdpfx Adjxgbxfjzsra Accessories included: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Ex stock - Immediately available -

Condition: excellent (used), functionality: fully functional, Technical specifications: - Manufacturer: Langzauner, Austria Predjzvu Ncspfx Adzja - Machine type: hydraulic heating plate/veneer press - Probable model: LZT 90 - Press area: approx. 2,500 × 1,300 mm - Total pressing force: approx. 90 t - Specific pressing pressure: approx. 2.8 kg/cm² - Number of hydraulic cylinders: 6 - Cylinder diameter: approx. 80 mm - Maximum opening width: approx. 400 mm - Design: presumably a bottom-platen press - Heating plates: electrically heated - Maximum heating temperature: depending on the design, approx. 120–130 °C - Temperature control: separate control of the heating plates - Plate guidance: parallel guidance with rack-and-pinion compensation - Operation: conventional control panel - Pressing time: adjustable via a timer - Pressing pressure: hydraulically adjustable - Automatic opening after the pressing time has elapsed - Machine dimensions L × W × H: approx. 2,950 × 1,550 × 1,950 mm - Machine weight: approx. 3,400 kg

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Prjdpfxjy Egkgs Adzja Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: ready for operation (used), functionality: fully functional, plate length 3500mm Pedpfx Aey N Rcnedzera plate width 1300mm two inserts water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm span between plates max 460mm

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Pjdpewxdctjfx Adzera Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables