Used Used Silos for sale (42,494)

Condition: used, tank capacity: 69,000 l, GENERAL INFORMATION Design: vertical Outer diameter: 3,550 mm Inner diameter: 3,500 mm Cpjdpfx Asyclq Ssfnou Total height: 9,400 mm Top head: conical head Location: outdoor storage Nameplate: Volume: 69,000 liters Product-contact material: aluminium Condition: used Cylindrical height: 6,450 mm TANK Specific gravity of medium: 0.6 (t/m³) Bottom head: conical bottom Support type: support ring TECHNICAL DATA / DIMENSIONS Ground clearance: 475 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, 1 Used Concrete Batching Plant In excellent condition! Manufacturer: EUROMECC Model: EURO 5 MIX Year of manufacture: 2019 Theoretical capacity: approx. 60–75 m³/h Total production to date: approx. 95,000 m³ Cedpfjxn A Nbox Afnjpu Aggregate storage in high silo / inline silo (reihensilo) • Capacity: 5 bins – each 45 m³ • 4 load cells (each 5,000 kg capacity) • Silo loading via feed conveyor belt • Truck feed via loading hopper (25 m³ volume) Complete plant with winter enclosure / insulation Mixers • 1x Planetary mixers with agitators • Type EUROMECC MEP 3000/2000 Dosing system • Aggregates: Weighing belt • Water dosing: 1 water scale 500 kg per scale • Admixture dosing: 1 admixture scale 2x12 liters • Cement dosing: 1 cement scale 1,000 kg per scale Control system • Operator/control container included • Main control system: ElettronData Cement silos – total: 6 units • 2x 150 m³ (Diameter: 4.6 m) • 1x 90 m³ (Diameter: 3.5 m) • 1x 45 m³ (Diameter: 3.5 m) Optional equipment: • Warm air heating system inside container • Chemical admixture storage in container • Rest concrete recycling system (optional) Condition: • The plant is in very good and fully functional condition. • AVAILABLE IMMEDIATELY • Location: Denmark • Price: on request Note: Offer is net ex-works, subject to prior sale. Errors, omissions, and/or misrepresentations excepted. No warranty or guarantee. Sold “as-is”, lying or standing. Any duplication, publication or reuse of this offer – in part or whole – is strictly prohibited.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1148877, Specification Table size 1016mm x 356mm X axis traverse 508mm Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Codpfsx Afpgjx Afnjpu Approximate weight 2313Kg   Machine Equipped with Haas CNC Control High flow coolant system Lighting Enclosed guarding Manual

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVM50GIRJA/02115, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle Bore 42mm Spindle motor 7.5Kw Width over bedways 318mm Travel cross slide 250mm Cpodpfxeycg Thj Afnju Travel top slide 100mm Travel tailstock barrel 145mm Taper in tailstock barrel No. 4MT Machine in Imperial execution MACHINE EQUIPPED WITH Newall DP700 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: excellent (used), Year of construction: 1980, Cryogenic storage tank for liquid vessel Cjdpfxefz Diqj Afnspu Oxygen, Argon, Nitrogen, Methane, Helium and Carbon dioxyde LIN, LOX, LAR, LNG, LHe und CO2, hydrogen. We would also be pleased to prepare an offer for you or provide you with further information about other vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Cpsdpfx Aox Sq Sbjfneu Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3096524, MACHINE SPECIFICATION Swing over front apron 641mm Cpodox R Sb Iepfx Afnou Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 165mm diameter Collet chuck Parts catcher Hydraulic tailstock Tool presetter Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3108833, MACHINE SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Cpjdpfxsx Ig Auo Afnju Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 165mm diameter Collet chuck Hydrafeed MSV 65 magazine barfeed Parts catcher Hydraulic tailstock Swarf conveyor Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: UK5451004, SPECIFICATION Motor 3Kw Contact wheel size 250 x 152mm Voltage 415 volt Grinding plane 475mm Grinding belt 152 x 2000mm Working height 990 Weight 130Kg Cpodpfx Afjx Ea Euoneu MACHINE EQUIPPED WITH Dust extractor for use with wood

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 19 months, type of cooling: water, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 370 A, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC ARXIS P403L 30-400 AMP 400 Volt Water-cooled Pulse Double Pulse Low Spatter Synergic 2/4 Takt 4 Roller drive Pre gas Post gas Start current End current Up slope Down slope Hot start Soft start Digital display Touchscreen Fixed programs Program memory Burnbacktime adjustable Steel – Stainless Steel – Aluminum – CuSi – CuAl – Inconel – Titanium weldable Including PRO5000 Welding Torch, Earth work lead with clamp, Gas cable, Interconnection hose, and 2 Years Factory Warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Cjdpfx Ajx Rciijfnspu All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg   Cpsdpfoxzqq Tex Afnou MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 1,055 kW (1,434.40 HP), type of cooling: water, overall weight: 6,300 kg, total width: 1,650 mm, total length: 3,300 mm, total height: 2,300 mm, warranty duration: 6 months, Watercooled chiller TRANE RTHD 300 SE 1055 kW Cooling capacity: 1055 kW / 299.98 tons (12/7 - 30/35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Trane CHHC1D1F0N0 (screw) Type of refrigerant: R134a Dimensions: 3.3x1.65x2.3 m. Csdsyha Naopfx Afnspu Weight: 6300 kg. Working hours: 8319 h. Condition: Good

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 117 kW (159.08 HP), type of cooling: air, overall weight: 830 kg, total width: 2,260 mm, total length: 2,110 mm, total height: 1,330 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RBS 120B0273 PE 117 KW Cooling capacity: 117 kW / 33.27 tons (12/7 — 35°C) Year of manufacture: 2016 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 3 pcs. Copeland ZP182KQE-TFD-604 (scroll) Type of refrigerant: R410а Number of fans: 1 pcs. + 1 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump GRUNDFOS AC 30-142 Dimensions: 2.11x2.26x1.33 m. Codsyha Hxjpfx Afnopu Weight: 830 kg. Condition: Good

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: RLX10110, MACHINE SPECIFICATION Height of centres 240mm Distance between centres 1250mm Maximum cutting length 1080mm Swing over bed 480mm Swing over cross slide 257mm Cedsxt E Nnopfx Afnjpu Swing in gap 700mm Gap width from faceplate 170mm Cross slide travel 230mm Spindle bore 80mm Spindle nose Camlock D1-8 Spindle speeds 25 to 2500rpm Main motor 7.5kW Tailstock quill travel 160mm Tailstock quill taper No. 5 MT Approximate weight 2950Kg Dimensions W x D x H 2600mm x 1460mm x 1810mm MACHINE EQUIPPED WITH Prototrak RLX CNC control TRAKing Auxiliary output 3 jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Cjdpfx Afoxldidjnjpu Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 52AMXTE5308, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04, 0.08, 0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 3 axis DRO system Infinitely variable spindle speeds longitudinal power feed Cross power feed Table guarding One shot centralised lubrication system Lighting Base splash tray Coolant system Cpodpewmn A Tofx Afnju NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 6V0146, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Cpsdpfx Afjwmm S Tonsu Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex display Dyson apprentice training facility, in excellent condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Cjdpfxsnxi Uuj Afnopu Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Cjdpfonxi R Ujx Afnspu Dust extraction Lighting

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Csdpfx Ast Dmmvjfnjpu Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23087A, SPECIFICATION Maximum grinding surface 140 x 300mm Distance between column and wheel axis 300mm Max.distance between table and wheel 280mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0.01mm Cpsdpfx Aevntguofnou Size of cup wheel 2.2kW Wheel speed 2840rpm Approximate weight 400kg MACHINE EQUIPPED WITH 260mm x 140mm x75mm (thickness) magnetic chuck Coolant system Guarding

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 52A2MXTE5269, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 815mm Cross traverse 300mm Vertical traverse 405mm Quill travel 125mm Quill feeds 0.04, 0.08, 0.15mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.25Kw Spindle speeds (inf. Variable) 50-3500rpm Spindle to nose to table 0- 450mm Spindle centre line to column 171 – 482mm Overall height 2100mm Overall depth 1300mm Overall width 1625mm Weight 950Kg Machine in Metric execution MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO system Infinitely variable spindle speeds Cjdpfxjw Id Hvj Afnopu Infinitely variable longitudinal power feed & rapid to table One shot centralised lubrication system Low voltage Halogen Worklight Table guarding Base splash tray Coolant system

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Cpjdpfx Aoq Atxyefnju Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6V0148, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Width in front of faceplate 165mm Bed length between centres 650mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle bore 42mm Spindle motor 7.5kW Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 100mm Travel of tailstock barrel 145mm Taper in tailstock barrel No. 4 MT Machine in Metric execution   Csdpewmm H Refx Afnjpu MACHINE EQUIPPED WITH Acu-Rite 2 axis DRO System 3 Jaw chucks Quick change toolpost and 2-off toolholders Chuck guard Saddle mounted chip guard Coolant system Lighting Rear splashguard NB Machine ex Dyson apprentice training facility, in excellent condition

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1125318, SPECIFICATION Travel X axis stroke 762mm Y axis stroke 406mm Z axis stroke 508mm Distance spindle nose to table 102-610mm Table Width 536mm Length 914mm Max. Weight on table 1361kg T Slots: width 16mm : pitch 125mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-8100rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 22.4kW Feedrate Rapid X, Y & Z axis 25.4m/min Max. Cutting feedrate 16.5m/min Toolchanger Capacity 20 tools Type BT40 General Approximate machine weight 3750kg Air supply (min) 113lpm, 6.9 bar Cpedpfxowx I N Ds Afnsu MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger