Used Run presses for sale (22)

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location Bwelqxxjv Sthgj Nqel

Condition: used, Year of construction: 2005, Price: On request Feed through press Langzauner LZT-OK 70 E SO Year of construction 2005 Serial number 401-05-X077 Maximum press dimensions 3000x1500mm Bwslqxxsv Ulvuo Nqel Maximum stroke 400mm Pressure 70T20kW, 31Amp, 380V 6cylinders Top plate 3000x1500mm, electrically heated Base plate 3400x1680mm, not heated With input and output conveyor. Dimensions:12000x2350xH2650mm, weight 6500kg - Year: 2005 - Documentation available: No - Serial number: 401-05-X077 - Press drive: drijving_pers. Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5500x4000x2250 mm Weight 8000 kg Total power requirement 45 kw Bslev A Hlmeqxx Nqswl

Condition: good (used), Year of construction: 2010, Functionality: fully functional, total width: 2,100 mm, total length: 3,500 mm, total height: 1,800 mm, working width: 1,300 mm, pressure: 160 bar, plate length: 3,000 mm, temperature: 60 °C, cylinder stroke: 100 mm, Equipment: hot water, Two hot-through presses Bwelqxx Njwbupceqel

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, Sergiani pass-through baler + automatic loading and unloading Year of production: 1999 Technical condition: very good, machine in working order Technical data: - Working width: 130 cm - Working length 4000 cm - automatic loading and unloading Bslqxx Nsr Eqpfeqowl - water-heated press tables Installation and commissioning for an additional fee.

Condition: new, Year of construction: 2025, Sample - production on customerdemand: Press area: 3000 x 1350 mm No. of cylilnders: 6 pcs. Diameter of cylinders 85 mm Specific pressure: 3,7 kg/cm² (with 350 bar), based on 80 % of the press area Press force: 12 - 120 TO Max. operating temperatur: 120°C Heating power: 230/400 V, 10,9 kW / heating plate, separately adjustable Belqxodq E A Ejx Nqewl Stroke / opening: 400 mm Closing / opening speed: approx. 20 mm/sec Working height: ~900 mm Belt speed: max. 15 m/min

Condition: ready for operation (used), Continuous press Tiger 3000x1400 mm Bwslqxx Noi Hlf Eoqjl

Condition: used, Year of construction: 1990, total width: 2,200 mm, total length: 5,900 mm, total height: 2,880 mm, Empty weight: 3.500 kg Corpuspers OCMAC - KGC EL TA Max. enclosure dimension 2450x1450x900mm Fully equipped with updated controls and cabling! Overall dimensions: 5900x2200x2880mm (LxWxH), weight 3500kg - Year: 1990 - Documentation available: No - Serial number: 0307 - Press drive: drijving_pers. - Max. workpiece height: 1450mm - Transport dimensions: 5900mm x 2200mm x 2880mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bslqxxev Uka Se Nqowl Glenn Smeets

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 8500x1800x2150 mm Bolqjv A Hkcexx Nqswl Weight 6000 kg Total power requirement 10 kw

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, opening width: 60 mm, working width: 2,800 mm, controller manufacturer: KUPER, controller model: PC 477, plate width: 2,700 mm, sheet width: 5,200 mm, The system is designed for processing MDF solid chipboard and lightweight boards, for example. Line control for all sub-machines is new! ASSEMBLY - Feeding - Brushing machine - Glue application machine - Disc roller conveyor with covering rake - Pre-laying belt - Covering belt - Continuous press - Stacking belt - Impact wall System was converted from oil to hot water in 2015. TECHNICAL DETAILS Brushing machine Lehbrink WL 40 Working width: 2800 mm Passage height: 60 mm Brush roller: 1 at the top and 1 at the bottom Motor: 2 x 280 V, 50 Hz Outfeed roller conveyor: driven, foldable Automatic height adjustment: automatic via servo motor Control: via the higher-level control system Glue spreader Hymmen KLM 2800 Roller length: 2800 mm Passage height: 100 mm Application rollers: 2 pieces, rubberized Diameter: 285 mm Dosing rollers: 2 pieces, rubberized and with dosing roller cooling Glue level regulation: by means of sensors (bracket installed) Height adjustment: automatic, by means of servo motor Control: via the higher-level control system Belstzcx Ajqxx Nqowl Disc roller conveyor Length: approx. 1000 mm Width: approx. 2800 mm Discs: made of V2A, can be extended sideways Legerchen: automatic Pane pitch: approx. 180 mm Pane spacing: approx. 140 - 180 mm Support rake: automatic, with scraper ruler Pre-alignment station: crosswise for aligning the glued workpieces Design: Complete substructure in sturdy design with V2A trays underneath the disk rollers Query of laying depth: via light barrier Wemhöner VOF 3- 900/3 throughfeed press Loading belt: driven Length: approx. 5500 mm Width: approx. 2800 mm Design: upper piston design Plate size: 2700 x 5200 mm Heating medium: Hot water Temperature of pallets: 80 °C Structure: 1 floor = 2 steel plates Specific pressure film loading: approx. 6.4 kg/cm² Fault and double document protection: for the entire press, measuring sensor and output unit Pressure setting via menu: MDF solid chipboard and lightweight boards Cylinder switching: automatic Stacking Bürkle Stacking system length: approx. 5500 mm Stop stiffness: 1300 mm Protective panel feed: from the right Roll width: 800 mm Machine control KUPER PC 477 SIMATIC Panel PC: with 15" Touch TFT Color Display based on Windows XP embedded operating system. Programmable logic controller: programmed on SIMENS Step 7 Decentralized periphery of inputs and outputs: via Profibus LED display: all inputs and outputs Integrated line control: for contactless control of the processing units Interface: SIMENS input panels MACHINE DETAILS Dimensions: 5800 x 3450 x 2800 mm Height allowance oil tank: 400 mm Height allowance substructure: 200 mm Height allowance armored rollers: 140 mm Bidders are obliged to collect the vehicle by the end of July 2024.

Condition: good (used), Obel Pedersen RF feed band press Opel Pedersen press type 2412 Press length 2500 mm width 600 mm with gluing, carriage, HF generator T20 V and water cooling System has been released. Bslqodybr Rjxx Nqowl

Condition: new, Year of construction: 2025, Sample - production on customerdemand: Bolqxx No A D Atjqewl This heavy press series, constructed as a down-stroke machine, has been designed especially for high specific pressure. Due to the high specific pressure, this state-of-art model comes with drilled steel heating plates. The control unites are located in a central switch console. The design is corresponding to our newest developments in technology. Press construction: - Lengthwise feed  gantry construction (gantries = solid steel frame) - Cross feed  welded construction (torsional stiffness)

Condition: used, IDC000109 Bjlqxx Nsvgddhsqewl - Obel Pedersen RF feed band press type T20V - Press length 2500 mm width 600 mm - HF generator T20 V and water cooling

Condition: used, Price: On request Veneer press continuous press gluing press plate press Bürkle HSO 240/D 340/140 Press dimensions: 3400x1400mm Max discharge pressure 240T Max pressing pressure 6 kg/cm² Cylinders 8 pcs. with diameter 110mm Stroke 150mm Solid plates 40mm Water heated with boiler up to 60 degrees. Plates can be heated up to 150 degrees with the right boiler. Bwjlqxsv Uka Ejx Nqol Glue roller: Omma GS 414 Year of construction 2004 Working width max. 1400mm (useful 1360mm) Roll diameter 200mm 4 rolls Press dimensions: 2500x3900xH2800mm, 8500kg Input conveyor dimensions: 2200x3600mm, 500kg Glue roller dimensions: 1600x800xH1500mm, 900kg Documentation still available, first owner! Sold as one unit including conveyor belts and glue roller. - Plate material: Steel plate - Documentation available: No - Press drive: drijving_pers. Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2001, Condition: excellent (used), Manufacturer: ERSSON ENGINEERING AB Designation: HF Kontipres 900 Year of manufacture: 2001 Machine. No.: A 140224-1 Compressed air: 10 bar weight: 29500kg Technical data: Binder width: 80-250mm binder height: 500-900mm Feed speed: max. 8m/min optional: lamella bearing / cross bearing Bslqxeg Tndlsx Nqswl - Double roller conveyor incl. cross conveyor - Binder stacking and feeder Ersson - roller conveyor and tilting device binder

Condition: new, Year of construction: 2025, The increased income significantly shortened the planned amortisation time. According to our satisfied customer, this investment – a large one by its standards – was one of its very best decisions. 3-fold capacity increase as compared to conventional production methods with veneer presses Adaptation of the plant to the customer specifications Bwjlqxxsduit So Nqjl Best ergonomic design Pilot laser systems ease placing the boards Fully-automatic measuring of the components and cylinder shutoff

Condition: used, Price: On request Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm Glue roller: Osama S4R/P-1400 Bwslqxjv Ukaxjx Nqel Year of construction 2000 Working width max. 1400mm Working height max. 100mm Roll diameter 250mm 4 rolls Sold as one whole including conveyor belts and glue roller. - Plate material: Steel plate - Documentation available: No - Press drive: drijving_pers. Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Picture 1 from manufacturer al example rest pictures original Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing pressure from below: Number of pressing chambers: 2 Max. Blade width: 270 mm Max. Glulam length: up to 18 m Glue beam contour: straight Lateral alignment of the lamellas: included Pressure system: hydraulic Permanent pressure control: included Packing: separate Feeding / discharging: in longitudinal direction Belqxjhtd E Aex Nqswl

Condition: new, Year of construction: 2024, Total press force: 120 to Size: 3000 x 1350 mm Spez. Pressure: 6 kg/cm² Number/Diameter cylinders: 6 pcs. / 85 mm Max. opening/stroke: 400 mm Side pressing cylinder: 8 pcs. Side pressure force: 24 tons This two-in-one press finds application where solid wood is being worked and also allows the pressing of veneers. When pressing veneers using the Model MHP, the procedure is the same as by all standard models. This machine has a special hydraulic cycle which is to activated when pressing solid wood. Table hydraulics and side pressure hydraulics are each controlled via their own hydraulic system. Patented thermostable electric heating plates are included as a standard feature of the Model MHP. Bolqxxs A D Dfj Nqjwl

Condition: used, Price: On request Veneer press Feed-through press HOT Colombo Bwslqxev Ui U Isx Nqjl Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - Press drive: drijving_pers. Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Price: On request Feed through press Bjlqxxsv Ui Unj Nqswl Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Plate material: Aluminium plate - Documentation available: No - Serial number: 13350686 - Press drive: drijving_pers. Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2018, Empty weight: 4.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Bwelqev Tvktexx Nqel - Year: 2018 - Documentation available: No - CE mark available: Yes - Serial number: P0220118 - Press drive: drijving_pers. - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets