Used gluing presses for sale (106)

Condition: used, working width 350 mm working length 5.100 mm hollow 210 mm Solid hydraulic beam press Bürkle type HS 1/90 35/510 for gluing timber, beams or other pressing tasks. Heating plates without function. Lsdpjy Eryyofx Ampsaa Including replacement cylinders as good as new.

Condition: used, work piece width max ~ 100 mm workpiece height max ~ 100 mm cycle time 4 sec Mitre jointing machine Himmel type HF120 for precise and firm gluing of mitre joints in wooden frames, glazing bars and battens with white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic pressing mechanisms and exact alignment of the workpieces. Ideal for furniture and picture frame construction. The glue must be applied manually as the machine does not have a glue container. Operation: Foot switch Possible angles: 90°, 120°, 135° Machine without function Lodpfev Hp Hbjx Ampjaa

Condition: used, Press pressure max 104 t working length 3.090 mm Lajdpsy Emwasfx Ampja Working width 4 x 240 mm Solid hydraulic molding or beam press Wemhöner type VS 4 S for veneering moldings, gluing wood or other pressing tasks. The press has four independently controllable pressing surfaces. Including dismantling and loading. Fixed loading date: 15.06.2026. Glue spreader also available.

Condition: good (used), Hydraulic gluing press for solid wood, e.g. window and door scantlings, solid wood panels, etc. Working length: 5 m. Working height: 1.53 m. Working depth: 0.10 m. Hydraulic unit: 2.2 kW. 10 hydraulic press cylinders. 5 pneumatic hold-down clamps. Max. pressing pressure: 150 kg/cm². Hydraulic unit: 2.2 kW. Laedjxiu Dgepfx Ampoa

Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the angled beam - Hydraulic cylinder with lateral ball bearing, adjustable, stroke 120 mm - Total and individual cylinder control Included in delivery: Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders can be switched off individually, 1 cylinder for adjusting the pressure beam, control panel for two operations, pressure gauge and pressure regulator, hydraulic unit, oil tank and hoses, - 220/380 Volt, - Pressing width 1800 mm - Pressing height 750 mm - Pressure beam support 80 mm - Weight approx. 500 kg Lsdpfjygwp Uex Ampoaa Transport available at extra cost!

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm Laedsyu Tp Tspfx Ampja - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 6763 TECHNICAL DATA - 5 piston cylinders - 3 upper - 2 side - max length of glued elements: 3100mm - max height of glued elements: 2100mm - motor power: approx. 2kW - upper cylinders: hydraulic - side cylinders: hydraulic - dimensions (L/W/H): 3750/1000/2700mm - weight: approx. 800kg ADVANTAGES Ljdpfx Ameyyyqvopsaa – very good condition – used press – not repainted – designed for professional use Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may be adjusted)

Condition: used, length 2.800 mm width 600 mm Lasdpfx Asviwqmsmpsa height 1.800 mm Number of pressing cylinders 6 Stk. work height max. ca. 1.000 mm Solid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. One cylinder without pressure shoe.

Condition: used, NICO DUIN frame press Lajdpfx Ajytc Snjmpoa

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 120 t, Hidrobrasil Glulam Press – Glulam Beam Press – 12,000 mm – 12 × 10 t Cylinders For sale is a hydraulic glulam press manufactured by Hidrobrasil, designed for the production of glulam beams up to 12,000 mm in length. This machine is engineered for industrial manufacturing of laminated timber beams and offers high flexibility in the pressing process thanks to cylinders that can be controlled individually or in groups. The system also enables production of curved components by using appropriate molding forms. ==== Technical Data & Information: Hydraulic Glulam Beam Press ==== General Information - Manufacturer: Hidrobrasil - Model: Glulam Press - Machine type: Glulam Beam Press - Design: Hydraulic beam press - Application: Glulam/laminated timber production ==== Working Range - Max. workpiece length: 12,000 mm - Max. width: 150 mm - Max. height: 600 mm (depending on wood type and construction) ==== Pressing System - Number of cylinders: 12 units - Pressing force per cylinder: 10 t - Individual or group control possible ==== Operating Speeds - Downward speed: 10 mm/sec - Upward speed: 25 mm/sec ==== Hydraulics - Components: Bosch Rexroth (except cylinders) Lsdpeg Tzbaefx Ampsaa - Hydraulic unit: external, located behind the press - Oil tank: 500 l - Motor power: 15 kW ==== Control System - Control panel for individual or group cylinder operation - Adjustable pressure holding time ==== Special Features - Production of both straight and curved glulam beams possible - High flexibility through modular cylinder control ==== Wood lamination, glulam manufacturing, timber construction, laminating, industrial wood processing Hydraulic press, hydraulic press, gluing press, glulam beam press, lamination press, laminated timber line, wood press, industrial press Are you looking for a hydraulic press tailored to your specific requirements? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directive, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our key strength is special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. Hydraulic systems mainly utilize components from leading European manufacturers.

Condition: excellent (used), MAWEG Gluing Press Machine frame inclined at 10 degrees Single-sided loading Horizontal beam with manually adjustable height via hand crank (all clamping cylinders can be adjusted together) Hydraulic cylinders with quick clamping function, infinitely adjustable Manual hydraulic cylinder clamping Pressing force per hydraulic cylinder approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Maximum clamping length: 2800 mm Maximum clamping height: 1800 mm 4 vertical pressing cylinders Laodpfx Asyyn E Uempoa 2 horizontal pressing cylinders 6 counter-stops Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are ex-location and are pick-up prices – loading included! • The machines have been cleaned and function tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and blockboards • Compact footprint with front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment—practical and functional • Vertically adjustable columns with frame pressing device Technical data: Working surface(s): 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Ledskwhb Hjpfx Ampjaa Pressure of hydraulic cylinders with manual adjustment: 1500 kg Installation dimensions approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice

Condition: good (used), Year of construction: 2011, functionality: fully functional, total length: 4,080 mm, total height: 2,250 mm, Clamping dimensions LxH: 3900 x 1580 mm Lajdpfx Ajywur Ajmpoa Installation dimensions LxHxD: 4080 x 2250 x 800 mm Press arms with manual hydraulic cylinder (100 mm press stroke, max. 2000 kg pressing force): 6 pcs. Hold-down devices: 2 pcs. Side pressure device with 2 rack and pinion drives Chassis

Condition: good (used), functionality: fully functional, EMMES EPP 200 Pneumatic Block Gluing Press Maximum gluing length: 2000 mm Number of vertical clamps: 6 Laedpfx Amjyynz Aspoa Number of frontal clamps: 3

Condition: excellent (used), functionality: fully functional, EMMES pneumatic block gluing press Ljdpfx Amoyynu Aspjaa Maximum gluing length: 3000 mm Number of vertical clamps: 8 Number of frontal clamps: 4

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation Lasdperu Evgjfx Ampea - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm Laedpfeyhggrjx Ampoa • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: good (used), Year of construction: 2012, machine/vehicle number: EC1-065-2500, functionality: fully functional, We are offering this well-maintained ALTEC Maschinenbau Powerline 065 PowerLine PL-065 pressure beam/gluing press from 2012. Ledpfx Asyuvc Aempeaa

Condition: new, Bernardo Gluing Press HVS 3000 The HVS 3000 gluing rack stands out for its universal application, as well as its easy and quick operation, making it indispensable for daily use in workshops and carpentries. Laodsxrnu Depfx Ampoa Technical Specifications Working length: 2800 mm Working height: 1460 mm Cylinder stroke: 65 mm Pressing force: 2500 kg Vertical hole pitch: 50 mm Total length: 3000 mm Total height: 2070 mm Frame depth: 925 mm Weight: approx. 198 kg Features • Suitable for a wide range of applications such as solid wood gluing, door manufacturing, edge banding, etc. • Robust gluing press with solid steel construction • Faster and more efficient bonding compared to screw clamps • Supplied as standard with 4 adjustable pressure beams and 1 pressure bracket • No tilting of pressure cylinders due to double spring-mounted guide Scope of delivery • 4 movable pressure beams, each with a vertical hand hydraulic cylinder and counter support • 1 movable, adjustable pressure bracket

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: Laodetutwvepfx Ampsa -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. TECHFA type PTD 6000 Ledpfx Aoyivr Hempsaa Max. dimensions of glued elements: - length: 6300 mm - width: 160 mm - height: 850 mm Press is divided into 4 sections.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Self-loading press for laminated wood Steton P111 3000×1300 Working length: 3000 mm Working width: 1300 mm Automatic material loading Shelves heated by oil Diameter of vertical pistons: 70 mm Ledpfjyuah Aex Ampjaa Diameter of horizontal pistons: 50 mm Year of manufacture: 2006 Total power: 24.5 kW CE certificate

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, Heavy-duty hydraulic semi-auto edge glue and laminating clamp carrier machine with 6 working sections for sale. It has been upgraded with 2 additional cylinders for panel flattening, 6 in total - 3 in each row. Machine has signs of use but it is fully functional and can be tested on site. Model: KCCM0/H-6 10 38-125 Year: 2014 Voltage: 3P 380V Max working length - 3100mm Laedsy Antkopfx Ampoa Max working width - 950mm Max working height - 90mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Lasdpfx Amevz Ev Ispoa Weight 0 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Laedpfx Amevz Etgopoa Weight 0 kg Total power requirement 3 kw