Used Pelletmaker Pm 22 E for sale (74,020)

Condition: used, Weinig Unimat 22E automatic planing and moulding machine for four-sided planing and profiling of timber, featuring a grooved bed for short and curved workpieces, a mobile spindle for variable widths and a long dressing table. Technical data: - Spindles: 6 - Spindle 1: Bottom (5.5 kW) / 40 mm / 6,000 rpm - Spindle 2: Right (4 kW) / 40 mm / 6,000 rpm - Spindle 3: Left (5.5 kW) / 40 mm / 6,000 rpm - Spindle 4: Right (5.5 kW) / 40 mm / 6,000 rpm - Spindle 5: Top (7.5 kW) / 40 mm / 6,000 rpm - Spindle 6: Bottom (4 kW) / 40 mm / 6,000 rpm Hodpfxezrxz Ue Adweu - Feed: 5.5 kW / / 6–36 m/min - Working width: 220 mm - Working height: 120 mm - Grooved bed: Yes - Mobile spindle: Yes

Condition: like new (used), Year of construction: 2018, operating hours: 6,472 h, load capacity: 2,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, Manufacturer + model: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 * Mast: 3F4650 Hodpfx Adezv R Hwowou ID: 26087.5931 Category: Used Mast: 3F4650 Lowered height: 2130 mm Lifting height: 4650 mm Capacity: 2000 kg Year: 2018 Hours: 6472 hours Capacity: Complete NEW * 48v / 625ah * Manufactured 02/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (permitted in ZONE 1 & 2) Gas group = IIB Temperature class = T4 Type = Cat 2D (permitted in ZONE 21 & 22 - Dust) Temperature class = T 135 *C - IP 6X Equipped with: - CONTAINER specifications!! - Joystick control for forward and reverse - Triplex FFL mast - Headlights front and rear - Flashing beacon - Blue spot - LOW cabin < 2000 MM!!!

Condition: good (used), Max. threading performance: metric thread, brass M33, cast iron M16, steel M14, including accessories. Hodpfx Adjibmn Ejweu

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,689 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: 1-pedal control (conversion to 2-pedal possible) Hjdpfx Adey Scfysweu Condition: Refurbished without warranty Technical Condition: Good Front tire type: Super elastic Front tire size: 18x7-8 Front tire condition: 60 - 80% Rear tire type: Super elastic Rear tire size: 15x4-5-8 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 500Ah Battery manufacturer: Hawker Battery type: PzS Battery year: 2022 Battery condition: 80 - 100% Description: Delivered with new FEM 4.004 inspection, including inspection record Sideshift, integrated sideshift, 4th valve free up to fork carriage 3rd valve, 4th valve, rear work light, front work light, roof cover, front windshield, full free lift, single pedal, Front windshield (without wiper)

Condition: like new (used), Year of construction: 2019, operating hours: 4,788 h, load capacity: 1,600 kg, lifting height: 5,450 mm, fuel type: electric, mast type: triplex, construction height: 2,480 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F5450 ID: 26084.5626 Category: Used Mast: 3F5450 Lowered height: 2480 mm Lifting height: 5450 mm Hjdpjzv R Ihefx Adwou Capacity: 1600 kg Year: 2019 Hours: 4788 hours Capacity: Complete NEW * 48v / 625ah * Manufactured 05/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (allowed in ZONE 1 & 2) Gas group = IIB Temperature class = T4 Type = Cat 2D (allowed in ZONE 21 & 22 - Dust) Gas group = IIIB Temperature class = T 135 *Equipped with: - Joystick control for forward and reverse - Triplex FFL mast - Complete street lighting - Roof window - Spotlights front and rear - New type display with touchscreen !!!

Condition: excellent (used), Year of construction: 2017, operating hours: 1,600 h, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Elektrisch Hersteller: DR. BOY Typ: 100E Typ: 552 Baujahr: 2017 Schließkraft: 100 Tonnen Holmabstand (hxv) 430 x 360 mm Einbauhöhe MIN. 250 mm Schnecken DN 1: 42 mm Spritzteilgewicht 1: 157,6 g/PS Schnecken DN 2: 24 mm Hjdpfx Adjzxrc Sswju Spritzteilgewicht 2: 39,1 g/PS Steuerung: PROCAN ALPHA Ausstattung: 1 x Kernzug Hochschleißfeste Plastifizierungseinheit Steuerung Pneumatische Nadelverschlußdüse Trockner, Hersteller: FARRAG, Baujahr: 2016

Condition: excellent (used), Year of construction: 2022, EMCOTURN E65 SMY - SIEMENS 3-AXIS CNC TURNING MACHINE WITH A TAILSTOCK AND POWERED TOOLS INCLUDING Y-AXIS AND C-AXIS Highly efficient universal turning machine for complete machining with stable and precise linear guides. State-of-the-art control technology SINUMERIK 828D with ShopTurn dialog programming. Main spindle: Hjdpfx Aszi Rr Tjdwou • Connection A2-6" (DIN 55026) • Max. bar diameter: ø65 mm • Max. drive power: 22 kW • Max. torque: 305 Nm • Speed range: 0-5000 rpm Tailstock: • Connection A2-6" (DIN 55026) • Drive power: 16.5 kW • Max. torque: 125 Nm • Speed range: 0-5000 rpm Tool turret: • 12-position tool turret VDI 30 radially arranged with direction logic for up to 12 powered tool holders! - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40mm Includes: • Hollow chuck cylinder incl. draw tube • C-axis for main/tailstock • Mechanical spindle brakes • Sinumerik 828D control with HMI Operate - SHOPTURN dialog programming - USB interface - Network drive / Ethernet - 15" multi-touch color monitor - 3D simulation, etc. • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (additional pump (3.5 bar)) • Part ejector and flushing through the tailstock • Air gun with spiral hose • LED machine bay light • Hydraulic unit • Interface for chip conveyor • Vibration-damping leveling feet • Mounting angle and high-performance anchor • Documentation / CE certificate Machine No. S6E222101 Year of manufacture: 2022 • Sinumerik 828D with dialog programming • Tool turret • 12-position tool turret VDI30 • Hollow chuck cylinder, C-axis for main and tailstock • Coolant system with coolant pump, part ejector • Hydraulic unit • Chip conveyor Jomatec 1200 mm • Tool breakage and wear monitoring • Part collection device • Short bar loader interface SL1200 • Tool measurement • 14 bar high-pressure coolant system • 3-jaw chuck BB-D 210/3 KK6 • Maximum machining length 175 mm • Maximum finished part diameter 65 mm • Maximum finished part weight 4.5 kg • Internal tool holder • Straight milling holder 90 mm • Angle drilling and milling holder • Door automation E 65

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Hsdpsz Aarcjfx Adwju Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 4789, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Hjdpfxsz Aalvj Adwsu Technical data: - Year of construction: 2016 - Serial number: 4789 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: like new (used), Year of construction: 2020, operating hours: 1,312 h, load capacity: 2,500 kg, lifting height: 4,760 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, Manufacturer + model: LINDE E 25 L - 387 / 01 * EX * Miretti 3GD / Zone 2 & 22 Mast: 3F4760 ID: 25061.4742 Cat.: Demo Mast: 3F4760 Lowered height: 2160 mm Lifting height: 4760 mm Capacity: 2500 kg Year: 2020 Hours: 1312 hours Capacity: 80 v / 625 ah Hodozv Rvfopfx Adwsu Options: CONTAINER specifications!! * EX * MIRETTI !!!!! System = Miretti ATEX - 00101 Ref = E11138 Type = Cat 3G (permitted in ZONE 2) Gas group = IIB Temperature class = T3 Gc Type = Cat 3D (permitted in ZONE 22 - Dust) Gas group = IIIB Temperature class = T 200 *C Dc Equipped with: - FULL cabin - Complete street lighting - Joystick control for forward/reverse - Spreader / S.s. - Sun visor for windshield & roof window - LED spotlight - Triplex FFL mast - Flashing light - Complete set of new tires (with ATEX specifications)

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5290, EUROMAC STX FLEX 12 1500/22-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2020 - Serial number: 5290 Hsdpfsz Aawxex Adweu - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GBW 22 P DDS Noise protection hood: 66 dB(A) 7m Continuous 3-phase power: 20.12 kVA / 16.10 kW Maximum 3-phase power: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Perkins 404J-22G Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2220 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Hedjq A T Dwspfx Adwju Consumption at 3/4 load: 4.0 liters Consumption at full load: 5.74 l/h Fuel tank capacity: 51 l Generator: MeccAlte ECP28-M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP Sockets with FI: 1x 32A - 400V / 5-pole Dimensions and weight: Length: 1645 mm Width: 870 mm Height: 1060 mm Tank capacity: 51 liters Weight, dry: approx. 546 kg Central crane loading eye Forklift can be driven under Glow pins Engine preheating PHS Battery charge retention

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 08/2027, total width: 680 mm, total length: 970 mm, total height: 1,700 mm, input frequency: 50 Hz, year of last overhaul: 2026, electrical fuse: 16 A, power: 4 kW (5.44 HP), Planetarymixer Model: Rego PM 40 E Hsdpfxeh H Svuj Adwju mixer Power adjustment stepless Intervention - protective grid LED control with timer 1 stainless steel kettle 40 liters 1 broom, 1 flat beater electric boiler lift Stationary machine with tank car DGUV V3 tested Connection 400V, 2.3 kW, 16A-CEE plug Dimensions: 970 x 680 x 1700 mm, DxWxH Used machine overhauled with 6 months warranty Visit our large sales warehouse with over 400 bakery machines!

Year of construction: 2019, condition: used, We are offering this used SM Innotech GmbH & Co.KG Incapcell 22-18 laminator, year of manufacture 2019. The system has very low operating hours, as it was used as a test machine for trial purposes. Individual software updates or other modifications can be provided according to requirements and at additional cost. The system is available for immediate delivery. Hedpfx Aey Dq D Ijdwju If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks Hjdpfx Adjvtgaxjwju The machine is isobaric

Condition: excellent (used), Year of construction: 2006, We sell the Mambranpress for kitchen doors, doors, or door frames, etc. Producer ORMA Macchine, Model: PM Air System 25/14 Year 2006. Area 2500 x 1400mm. / 1 Table PIN system for edge binding. Possible to see at work. Documentation included Hodjzmnyiopfx Adweu

Condition: new, Code: N0235 Brand: CASADEI INDUSTRIA Model: E 350 PM Automatic edge bander with hot melt (EVA) glue pot, chain panel feeding and pre-milling Maximum finishing quality Chain feeding system Pre-milling (E350PM) 3 free spaces for finishing units High performance 7 m/min feed speed 45 mm panel height 2 mm edge coils Hodpfx Asyvt Exsdwou Minimum space occupied 2,30 m length Easy to use Unit settings with a piece of edge Easy and intuitive use of machine 3 position infeed fence 0-1-2 mm (according to edge thickness) Chain panel feeding Firm grip of panel guaranteed by special non-slip rubber on the pads. Linear feeding ensured by double sliding tracks with a special geometric profile accurately machined with precision to a hundredth of a millimetre. Long lasting monolithic frame fully processed only in one cycle on a CNC machining centre. Pressure bar with locking levers Top pressure bar with a double row of rubber wheels mounted on bearings, with locking levers and position indicator Pre-milling INVISIBLE GLUEING LINE DIAMOND tools Ø= 60mm H= 54mm HF motors 200 Hz – 12.000 rpm – 0.75 kW (each) Dedicated suction system and blower for panel cleaning before glueing Glueing unit PERFECT GLUEING, QUICK AND PRACTICAL SET-UPS 6 heating elements to guarantee uniform glue temperature. Motorized glue spreading roller with an internal electrical heating element. Inferior Teflon-coated glue pot to permit complete and rapid cleaning. Pneumatic shear, pressure rollers, edge feeding system DETAILS THAT MAKE THE DIFFERENCE Edge feeding synchronized with panel being processed Oscillatory movement of the cutting shear unit to guarantee perfect glueing Quick and precise positioning of the pressure rollers. The system “reads” the edge thickness, making mistakes impossible! Trimming cut-off PERFORMANCE AND VERSATILITY End trims front and rear excess edge Working cycle controlled by PLC Exclusion from control panel (PLC) Flush trimming unit Flush trimming unit with vertical disc copiers as standard Possibility of processing for edges from 0.4-2 mm Anti-adherence / release agent spraying unit (Opt.) INSTANT PERFECT CLEANING Spray function controlled by PLC 2 sprayers (lower and upper) and liquid tank Infrared lamp (Opt.) TO GUARANTEE THE BEST GLUEING CONDITION Creates the best conditions for perfect glueing Heats panels and removes all traces of dampness.

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: 09623212, Soundproof housing Motor power: 3 kW Dimensions of the grinding chamber: 220 x 170 mm Number of rotor blades: 3 Hodpfx Aezimw Esdwou Number of stator blades: 2 Rotor diameter: 170 mm Rotational speed: 270 rpm (at 50 Hz) Sieve hole diameter: 5 mm The mill is new and has never been used! PRICE REDUCED FROM 5950 TO 5350 EUR!!!

Condition: used, mileage: 242,000 km, power: 162 kW (220.26 HP), first registration: 11/2014, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, tail-lift, short cab fully air-suspended differential lock air conditioning heated seats automatic transmission Brandt refrigerated body Hjdsza Nlhopfx Adwju 2 compartments (partition wall 4,600 mm long) loading space on the right: 4,600 x 820 mm portal doors side door 1,500 kg MBB Palfinger tail lift Carrier Supra 1,250 refrigeration unit Euro 6

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Hsdpfx Aox Aqdcsdwou Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, power: 78 kW (106.05 HP), first registration: 12/2025, fuel type: gasoline, axle configuration: 4x2, color: white, gearing type: mechanical, suspension: steel, Leaf spring suspension, UNIQUE UNIT - ZERO-MILE VEHICLE - REGISTERED 12/17/2025 - SHORT RANGE LPG (15L) - DUAL REAR WHEEL - WHEELBASE 3250mm - OPTIMIZED PAYLOAD 550 Kg - WHITE COLOR - REAR TIPPER BODY: 2300x1800mm - PM 2821 CRANE - TOP EQUIPMENT: DAB radio, Manual air conditioning, Electrically heated, folding, and adjustable exterior mirrors, Passenger airbag, Body-colored front bumper, Fog lights - VEHICLE AVAILABLE SUBJECT TO PRIOR SALE - TIPPER BODY FEATURES: - Chiarvesio-built rear tipper body, 2300x1800 mm (external dimensions) - L-shaped sideboards, 400 mm high, with 180-degree lateral opening, and rear opening from below/above - 30/10 sheet metal floor - 01 front pole holder - 01 galvanized 400mm tool box - Fenders - 1+1 winches - rear light grilles CRANE FEATURES: - model PM 2821 - 02 manually extendable stabilizers - 01 hydraulic extension - 02 additional actuators - bilateral 6-element controls - 01 swivel hook - 200 rotation buffers (the crane does not operate above the cab) Hjdpfx Aszf Sbuedweu

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm Hedpfx Asx Dtt Asdweu CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2022, Exhibition machine Panel thickness: 8 - 50 mm Edge thickness: 0.3 - 3 mm Solid edges up to 5 mm 7" touchscreen Release agent spraying at the infeed Pre-milling with two diamond milling heads Infrared preheating lamp Top-mounted, interchangeable gluing unit (including a second glue reservoir) Cross-cut saw unit Flush trimming unit R1 Corner rounding unit Nesting scanning rollers Profile trimming unit Glue trimming unit Hjdpfx Adjzvapuewju Spraying unit for finishing Smoothing unit New machine, available after exhibition

Condition: used, Year of construction: 2005, operating hours: 160 h, machine/vehicle number: RS000562, Size 36 x 52 cm, CPtronic, Easyplate, Alcolor dampening system, banket wash, impression cylinder wash, segmented ink blades, Baldwin cooling and recirculation system. Hodpjztappjfx Adwju

Year of construction: 1990, condition: defective spare-parts repository (used), -1- used rotor body for SBM 16 22 6 or Hazemag AP5 wide. Including 6 blow bars type HAZ 846 b (380x85x2250 mm, approx. 548 kg each), needs repair (see photos), year of manufacture unknown. Weight approx. 10 t, dimensions approx. 2250 x 1600 x 1600 mm. Hedpey Au Nrjfx Adwou