Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Codpfjxcld Dox Advehc Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain MillPlus, spindle speed (max.): 12,000 rpm, Machining center with measuring probe! Codpfx Aoxb Rqmjdvohc TECHNICAL DETAILS X travel: 630 mm Y travel: 560 mm Z travel: 560 mm Number of axes: 4 Table size: 1000 x 600 mm Spindle speeds: 12,000 rpm Rapid traverse: 30 m/min Tool changer: 24 positions MACHINE DETAILS Control: Heidenhain MillPlus

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, TECHNICAL DETAILS High-performance microfocus tube: 180 kV / 20 W Detection capability: up to 0.5 µm Digital detector: GE DXR Image frame rate: 30 frames per second Pixel count: 1,000 x 1,000 Resolution: 200 x 200 µm Software: Xact version MIL 9.0 Build 12 MACHINE DETAILS Mains connection: 230 V / 50/60 Hz Power consumption: 2,000 VA Full load current: 8.7 A Protection class: IP 20 Short-circuit protection: 10 A Short-circuit breaking capacity: 10 kA Switching version: nanomex 2.0 EQUIPMENT - Overhauled for €185,000 - New high-voltage generator (2022) - New high-voltage cables (2022) - New isolator (2022) - Complete overhaul of the electronic control board Chedexannmopfx Advsc - Complete overhaul of the X-ray tube - Replacement of all seals and target

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,129 h, functionality: fully functional, machine/vehicle number: 3XY203, turning length: 150 mm, turning diameter: 120 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,000 kg, controller model: FANUC Series 21i-TB, TECHNICAL DETAILS Max. turning diameter: approx. 120 mm Max. turning length: approx. 120 – 150 mm Spindle speed: max. 6,000 rpm Y-axis: available Csdjxctvnopfx Advshc Tool turret: 12 stations, often with driven tools Main spindle motor power: approx. 5.5 – 7.5 kW Power of driven tools: approx. 2.2 kW MACHINE DETAILS Control: FANUC Series 21i-TB Voltage: AC200/200-220 V ±5% Frequency: 50/60 Hz ±1 Hz Phases: 3 Power supply: 25 kVA Total power: 19 kW Spindle motor: SP1 - 5.5/7.5 kW Control circuit: AC100 V, DC24 V Dimensions & Weight Dimensions (L × W × H): approx. 2,200 × 1,500 × 1,800 mm Weight: 4,000 kg Operating hours Machining hours: 28,129 h Power-on hours: 84,037 h Note: Extensive accessories are included in the scope of delivery.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 132 kW (179.47 HP), frequency: 50 Hz, Equipment: CE marking, air conditioning, Brand new, unused pellet press, year of manufacture 2024!\n\nTECHNICAL DETAILS\n\nRaw material processing: grass, rice husks, wood sawdust, biomass, straw, cotton stalks\nOutput: 1,500 – 2,000 kg/h\nPellet diameter: 6 – 12 mm\n\nMACHINE DETAILS\n\nMain motor power: 132 kW\nVoltage: 3 phase, 380 V, 50 Hz\n\nDimensions & Weight\nDimensions (L x W x H): 2,600 x 1,300 x 2,300 mm\nWeight: 4,500 kg\n\nEQUIPMENT\nFully automatic control cabinet\nAir conditioning\nAutomatic bearing lubrication system\nRoller and new ring die (6 mm) for sawdust\nCE & ISO certification Chjdpfx Adsxclitsvoc

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-15-4101, travel distance X-axis: 535 mm, travel distance Y-axis: 535 mm, travel distance Z-axis: 535 mm, spindle speed (max.): 24,000 rpm, tool diameter: 280 mm, Equipment: chip conveyor, 5-Axis Machining Center with Chip Conveyor! Bidding obligates the buyer to collect the item by 14.10.2025 at the latest! TECHNICAL DETAILS Travel paths Travel range X-axis: 535 mm Travel range Y-axis: 535 mm Travel range Z-axis: 535 mm Feed speed X/Y direction: up to 60 m/min Feed speed Z direction: 30 m/min Spindle Head Spindle power: 12 kW Spindle speed: 1,500 - 24,000 rpm C-axis swivel range: -220 - +220 ° A-axis swivel range: ° Coolant temperature: 15 - 45 °C Codpfx Aexhgpfodvshc Tool Magazine Tool holder: HSK-F63 Interface: HOMAG Interface 9-002-04-3360 Number of tool positions: 18 Pitch circle diameter: 760 mm Max. total toolholder weight: 90 kg Max. weight per tool: 10 kg Tool diameter: 280 mm Max. tool height: 320 mm Clamping Cylinder Lower clamping plates: 70 × 90 mm Upper clamping plates: 77 × 100 mm Piston rod diameter: 25 mm Clamping height above console: 100 mm Lift – support cylinder: 55 mm Clamping force: 1,300 N Max. workpiece height: 80 mm Return: manual Drilling Unit with Slotting Tool Drill tool speed: max. 6,000 rpm C-axis swivel range: ± 360° Tool holder for drill tool (rotating): Ø 11.55 mm Tool holder for slotting tool (fixed): Ø 18.95 mm Weight (mounted): 3.5 kg Chip Conveyor Discharge height with incline conveyor: 1.3 m Discharge height without incline conveyor: 0.3 m Max. scrap piece size: 300 × 300 mm EQUIPMENT Chip conveyor Eagle Eye laser projector 40 tools Numerous additional accessories

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 134, frequency: 50 Hz, Cup filling line for high production capacities! Filling speed of up to 2,400 cups per hour! TECHNICAL DETAILS Cup size: 71 mm Speed: 2,400 cups per hour Stations: cup dispenser, filler, aluminium lid, sealing, discharge conveyor MACHINE DETAILS Electrical data Cjdpfx Adsxdw Hmevjhc Supply voltage: 415 V Number of phases: 3 Frequency: 50 Hz Current consumption: 25 A Control voltage: 24 V AC Main fuse: 10 A Note: Cup size can be customized.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 780 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 2,500 rpm, TECHNICAL DETAILS Travel X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 780 mm Number of machining axes (excluding parallel axes): 5 Table Clamping surface (left-right): 1,000 mm Clamping surface (front-back): 1,000 mm Workpiece weight (max): 6,000 kg Rotary axis: C > Positioning accuracy 0.001° Milling Spindle/Head Spindle type: Swivel head > Positioning accuracy 2.5° Speed range: up to 2,500 rpm Tool holder: ISO SK 50 Drive power: 22 kW Tool Magazine Tool positions: 60 Workpiece Automation Number of storage spaces: 2 Pallet length: 1,000 mm Pallet width: 1,000 mm Number of pallets: 2 MACHINE DETAILS Dimensions & Weights Space requirement (left/right): 6,400 mm Space requirement (front/back): 6,900 mm Overall height: 4,000 mm Total weight: approx. 26,000 kg Control: HEIDENHAIN TNC 426 Chjdpfx Adexb Rpcjvsc

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 105885, turning length: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 640 mm, turning diameter over bed slide: 530 mm, TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over cross slide: 380 mm Distance between centers: 600 mm Max turning length: 600 mm Number of controlled axes: 4 X-Axis Travel: 260 mm Rapid traverse: 20,000 mm/min Z-Axis Travel: 640 mm Rapid traverse: 25,000 mm/min Codpfoxdcxzex Advohc Spindle Spindle diameter: 100 mm Spindle speed: 45 – 5,000 rpm Tools External turning tools: 25 × 25 mm Internal turning tool diameter: 40 mm Tool stations: 20 Driven tools Spindle speed: 45 – 4,500 rpm C-Axis Control angle: 360° Rapid traverse: 200 rpm MACHINE DETAILS Control: OSPU 100L Dimensions & Weight Dimensions (L x W x H): 2,950 × 2,050 x 2,010 mm Operating hours Spindle hours: 30,000 h Machine hours: 86,000 h EQUIPMENT Forkardt swing chuck Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, operating hours: 41,448 h, functionality: fully functional, machine/vehicle number: 3XY2L08, turning length: 200 mm, turning diameter: 160 mm, spindle speed (max.): 6,000 rpm, overall weight: 2,270 kg, controller model: FANUC Series 21i-TB, TECHNICAL DETAILS Y-axis: available, milling operations C-axis: available on both spindles Main spindle speed: max. 6,000 rpm Max. turning diameter: approx. 160 mm Max. turning length: approx. 200 mm Tool turret: 12 stations, supports driven tools MACHINE DETAILS Control: FANUC Series 21i-TB Chsdpfxjxctuqj Advoc Electrical Data Voltage: AC 200/200-220V ±5% Frequency: 50/60 Hz ±1Hz Phase: 3 Power supply: 26 kVA Total power: 21 kW Control circuit: AC100V DC24V Dimensions & Weight Dimensions (L × W × H): approx. 2,300 × 1,600 × 1,900 mm Weight: 2,270 kg Operating hours Cutting hours: 41,448 h Note: Extensive accessories are included in the scope of delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 26,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, cutting speed: 300,000 mm/min, workpiece weight (max.): 1,800 kg, TECHNICAL DETAILS Travel ranges X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Maximum workpiece weight: 900 kg Laser: TruDisk 5001 Maximum power: 5,000 W Wavelength: 1.03 µm Maximum sheet thickness Mild steel: 25 mm Stainless steel: 20/25 mm Aluminum: 20/25 mm Copper: 10 mm Brass: 10 mm Speed Simultaneous: 265 m/min Cedpfjxd Afhjx Advshc Accuracy Positioning deviation Pa: 0.05 mm Maximum mean positioning deviation Ps: 0.03 mm MACHINE DETAILS Control unit: Siemens Sinumerik 840D SL Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg Power consumption Total system: 7–39 kW Resonator: 5 kW fiber Beam on hours: 26,000 h Operating hours: 68,000 h

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Chsdpfx Aexhgk Aodvjc Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Condition: like new (used), Year of construction: 2022, operating hours: 150 h, functionality: fully functional, machine/vehicle number: W09268325N2D38082, permissible axle load: 9,000 kg, conveyor belt speed: 2,900 mm/s, roller diameter: 600 mm, roller length: 2,200 mm, number of rollers: 1, As-new Doppstadt Inventhor 6 with only 150 operating hours! TECHNICAL DETAILS Input hopper length: 3,390 mm Drum length: 2,200 mm Drum diameter: 600 mm Number of drums: 1 Permissible total weight: 25,000 kg Permissible load at coupling point: 1,000 kg Permissible axle load per axle: 9,000 kg Discharge belt width: 1,000 mm Cjdpoxcvpwefx Advehc Discharge belt length: 4,900 mm Belt speed: 1.3 - 2.9 m/s MACHINE DETAILS Length: 12,960 mm Width: 2,540 mm Height: 3,390 mm Transport width: 2,540 mm Transport height: 3,610 mm Transport length: 9,140 mm Engine power: 310 kW / 421 HP Fuel tank: 500 l Operating hours: approx. 150 h EQUIPMENT Overband magnet

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Chjdsxb Rk Tjpfx Advoc Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Machine weight: approx. 5.7 t Space requirement: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3-phase Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Cjdpfoxgqy Eox Advehc Extraction unit Rail-guided Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 30,629 h, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, material thickness: 20 mm, Laser cutting machine including paternoster! Machine serviced by manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Principle: c2-laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel Range and Cutting Parameters Chedpfexc E Dqjx Advsc X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Z-axis travel: 200 mm Table load: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min X-axis travel speed: 80 m/min Y-axis travel speed: 80 m/min Simultaneous axis: 113 m/min Z-axis travel speed: 60 m/min Control system: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & Weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Cooling unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting traverse load capacity: 3,000 kg MACHINE DETAILS Dimensions & Weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading bay Unloading platform Lifting traverse Pallet changer Vacuum traverse

Year of construction: 1994, condition: ready for operation (used), functionality: fully functional, cutting speed: 500,000 mm/min, roller width: 520 mm, No reserve price – guaranteed sale to the highest bidder! Cjdoxcxx Uopfx Advohc Machine operational as shown in the video! Small format cutter, cross cutter and cut-size sheeter TECHNICAL DETAILS Unwinding - 2x shaftless roll stands - Maximum unwind diameter: 1,200 mm - Core diameter: 70 mm - Maximum roll width: 520 mm - Paper grammage: 60 – 170 g/m² Cutting Unit - Number of knives: 3 - Cross cut formats: DIN A4, upgradable to DIN A3 - Maximum cutting speed: 500 m/min - Operating speed: approx. 250 m/min with 80 g/m² paper - Maximum cutting frequency: 1,700 cycles/min - Cutting tolerance: ±0.15 mm - Maximum sheets per minute: 1,000 PROCESS - Unwinding - Cutting unit with 3 knives - Cross cutter for DIN A4 - Overlapping - Counting and stacking of sheets - Transfer to the right in running direction - Output of finished packs, e.g., 500-sheet reams

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Csdpfx Adjxdwiuevjhc Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0-250-15-0310, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, number of slots in tool magazine: 9, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Control model: WOODWOP 7.0 Safety standard: CE marking EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) 2 cutting units Cjdpfx Adoxdw Tgevjhc Note: Tools are not included in the sale and delivery scope.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,000 h, functionality: fully functional, spindle diameter: 32 mm, Equipment: bar feeder, chip conveyor, CNC Swiss-type lathe with comprehensive equipment! Main spindle diameter: 32 mm MACHINE DETAILS Operating hours: 18,000 EQUIPMENT Synchronously driven guide bushing C-axis on main and sub-spindle Workpiece conveyor belt Collet sleeve main spindle: F37 (673-53) Collet sleeve sub-spindle: F37 (673-73) 3-spindle cross drilling unit 4-position tool holder 16x16 mm Sub-spindle (32 mm sub-spindle capacity) Parts blower to the front Parts ejector Parts ejection safety device Cut-off tool breakage safety device Separate coolant tank with level and flow monitoring Automatic central lubrication unit with oil level monitoring Leveling bolts and plates Toolbox FMB Turbo 3-26 bar feeder, year of manufacture: Cjdpfexc I Apex Advjhc RS232C interface for bar feeder Fire extinguishing system Kraft & Bauer / GUT Feuerschutz Mayfran chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 12,024 h, machine/vehicle number: A0240A0643, sheet thickness (max.): 20 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Working area X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum cutting thickness: 20 mm Maximum workpiece weight: 1,700 kg Speed Simultaneous: 140 m/min Control: Siemens Sinumerik 840D SL Chsdpfxexgqv Ho Advoc Accuracy Position deviation Pa: 0.05 mm Mean positional scatter Psmax: 0.03 mm Laser: TruFlow 4,000 MACHINE DETAILS Connected load: 4,000 W Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Weight: 13,000 kg EQUIPMENT Separate control unit and cooling Trumpf LoadMaster Exhaust system Trumpf/Handte MF-L40/8/1 (Max. extraction capacity: 2,000 m³/h)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,100 h, carrying capacity of cage: 200 kg, platform length: 1,200 mm, platform width: 800 mm, empty load weight: 4,300 kg, fuel type: diesel, working height: 30,000 mm, TECHNICAL DETAILS Working height: 30.00 m Basket capacity: 200 kg Platform height: 1.10 m Platform length: 1.20 m Platform width: 0.80 m Lateral outreach with 80 kg: 15.70 m Lateral outreach with 200 kg: 14.00 m Articulating jib: 180° Basket rotation: 180° Turret rotation: 450° Max. gradeability: 30% Max. oscillation angle: 30% MACHINE DETAILS Dimensions & Weight Transport height: 1.98 m Overall length: 7.20 m Minimum overall width: 1.58 m Ground clearance: 0.27 m Track size: 1.92 m × 0.25 m Total weight: 4,300 kg Csdpfx Aoxggb Esdvjhc Standard stabilizer length: 5.30 m Standard stabilizer width: 4.75 m Stabilizer pad size: 0.31 m × 0.22 m Ground pressure, driving position: 3.7 kN/m² Ground pressure, working position: 2.0 kN/m² Point load at stabilizer pad: 26.0 kN Drive & Battery Drive type: Diesel engine / 230 V electric drive (large pump) Diesel tank capacity: 40.0 l Battery: 80 V Travel speed: 3.0 km/h Operating hours: 3,100 h

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter: 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Chedpfx Adsxc Iy Ievec Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,500 h, carrying capacity of cage: 227 kg, platform length: 2,440 mm, platform width: 900 mm, empty load weight: 7,552 kg, Equipment: all wheel drive, TECHNICAL DETAILS Working height: 15.77 m Platform height: 13.77 m Platform size: 0.9 × 2.44 m Platform rotation: 180° Horizontal outreach: 12.12 m Lifting capacity: 227 kg Maximum number of persons: 2 Jib length: 1.52 m Jib movement: 63° / 66° Climbing ability (4WD): 45 % Axle oscillation: 0.20 m MACHINE DETAILS Dimensions & Weight Cedpfxjxgf A Uj Advjhc Dimensions: 8.79 x 2.29 x 2.39 m Weight: 7,552 kg Tail swing radius: 0.94 m Wheelbase: 2.29 m Ground clearance: 0.28 m Travel speed (stowed): 7.2 km/h Travel speed (extended): 0.8 km/h Inside turning radius (4WD): 2.13 m Outside turning radius (4WD): 5.02 m Operating hours: 1,500 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: TK22, carrying capacity of cage: 227 kg, platform length: 900 mm, empty load weight: 12,383 kg, transport length: 2,400 mm, working height: 21,900 mm, The telescopic work platform has been serviced regularly! TECHNICAL DETAILS Working height: 21.9 m Platform height: 20.1 m Platform size: 0.9 × 2.4 m Platform rotation: 180° Horizontal outreach: 17.4 m Load capacity: 227 kg Maximum number of persons: 2 Jib length: 1.5 m Jib movement: 63° / 66° Climbing ability (4WD): 50 % Axle oscillation: 0.3 m MACHINE DETAILS Driving speed (retracted): 7.2 km/h Chsdpfxjxgfude Advec Driving speed (extended): 0.8 km/h Dimensions & Weight Transport dimensions (L x W x H): 10.3 x 2.4 x 2.6 m Tail swing radius: 1.2 m Weight: 12,383 kg Wheelbase: 2.4 m Ground clearance: 0.4 m Turning radius inside (4WD): 2.8 m Turning radius outside (4WD): 5.1 m