Condition: excellent (used), Year of construction: 2005, Wheelabrator MLK1500 table shotblast machine. 2 machines available Newer version fitted with foundry scalping drum suitable for foundry sand Complete with electrical control panel, media recycle system and reverse jet cleaning dust extractor. Doh2Lp Table Diameter: 1500mm Max Table height: 1000mm Max Capacity: 2,500kgs No of Blast wheels: 2 Blast Wheel Power: 7.5kW each direct drive Available with fully warranted refurbishment, delivery and installation.

Condition: good (used), Year of construction: 2014, Make: RIPPERT, year of manufacture: 2014, serial no.: 21403197, consisting of: Overpressure area, 8,000 m³/h supply air, 2 painting areas (1+2), for spraying/hand painting, max. workpiece size: 300x130x150 cm, maximum permissible solvent throughput: 12,500 g/h, air speed: 0.31 m/sec, Total exhaust air volume flow: 26,000 m³/h; paint storage room, 600 m³/h supply/exhaust air; evaporation zone, heat output: 59 kW, heating medium PHW 130/90, max. temperature of heating surfaces: 130°C, maximum permissible solvent throughput: 12,000 g/h, air speed: 0.2 m/sec, Supply air volume flow: 4,000 m³/h; 3 dryers (1/2/3) HDW-TK 13000, max. drying temperature: 60°C, heat output: 2x 75 kW, heating medium PHW 130/110 C, max. temperature and heating surfaces: 130°C, maximum permissible solvent throughput: 14,000 g/h, air speed: 3 m/sec, Supply air volume flow: 1,000 m³/h; sanding booth, max. workshop size: 300x130x150 cm, air speed: 0.39 m/sec., total exhaust air volume flow: 20,000 m³/h; supply and exhaust air systems; circulating air dryers; sanding dust filter; control cabinet system, paint mixing and dosing system, manufacturer: OLTROGGE, type: Regular 30-2K, year of manufacture: 2014, ser.No.: 6019166, consisting of: 14 GRACO / BÖLLHOFF pumps, 11 agitators, 2 switch and control terminals, 2K paint and dosing system, manufacturer: OLTROGGE, type: Regular 30-2K Twin, year of manufacture: 2017, serial no.: 17B0S1668-27/4500659207, with 6 GRACO paint pumps, 4 agitators, switch and control cabinet Bkv3S9Kmk

Condition: good (used), UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface heater -Manufacturer: Hönle, UV drying system for drying paints, varnishes and plastics -Type: Uvaprint 420 HPLK, incl. lamp -Number: 4x UV dryers available -Price: per piece -Dimensions: 600/355/H140 mm B087Foab -Weight: 16 kg/piece

Year of construction: 2018, Condition: as good as new (ex-display), Functionality: fully functional, o Max. temperature 950 °C o Useful dimensions: H=10; Heating length 1600; Cooling length 2600 o Conveyor belt width 150 o H2/N2 atmosphere o External cooling unit Bjemmjifpte

Condition: good (used), Year of construction: 2004, see pictures Bmbydcjomto

Condition: used, Year of construction: 2015, 0 1,22 x 0,615 x 0,58 mm operating pressure 2,7 - 5,5 bar dimensions 1,25 x 0,85 x 1,7 m Dqxydd air consumption at 6 bar 400 l/min weight of the machine ca. 0,15 t

Condition: excellent (used), • CM T10 table shotblast • Table diameter: 1000mm • Max. internal height: 500mm • 5.5kW blast motor • New internal rubbers Gynqq0 • New blast wheel and liners • PLC control panel • Safety interlocks • Dust cartridges with pulse jet cleaning • Refurbished machine • Excellent working order with demonstration available

Condition: used, Year of construction: 2013, Powder coating system, used Make: AFOTEK + Wagner Year of construction: 2012/2013 - Pretreatment - Powder coating WAGNER automatic + manual - Oven gas - Shuttle transport system Designed for components with dimensions up to approx.: Length: 3,000 mm Height: 2,500 mm Depth: 200 mm (500 mm) The system was used to coat sheets for building elements / doors / etc. ----- Consisting of: 1. Pretreatment - Acid pickling degreasing - Rinsing - VE rinsing - Chrome-free passivation 2. Drying chamber - 2 shuttles in a row 3. WAGNER automatic powder coating - Supercenter HD - SuperTech 20000 booth - 2 x Wagner VU1 3600 movement system - Powder recovery cyclone + filter 20000 4. WAGNER manual powder coating - ICF booth - SPRINT powder coating Txejzed3Y 5. AFOTEK powder firing oven - Usable space 128 m2 - 260 kW, natural gas H 6. Shuttle transport system: - Individual rails with a length of approx. 3 m - 2 x “elevators” for different levels - Parallel movement, as the oven is passed through in 2 lines - Waiting areas, buffer zones - Cooling section Total space required approx.: 65 x 20 m, height 5.50 m

Condition: good (used), marking machine, marking device, marking device, electrochemical marking and etching machine, electric pen, metal pen Tpplyy90S -Manufacturer: Metaletch , Electrochemical Marking Machines -Type: ME92 -Accessories: see photos -Dimensions: 300/270/H75 mm -Weight: 1.1 kg

Condition: excellent (used), Year of construction: 2016, through-put width 860 mm working heigth 815 mm Pmwaelq8G working area L-W-H 1170 x 860 x 815 mm rate of flow 400 - 700 l/min total power requirement kW weight of the machine ca. 200 kg dimensions of the machine ca. 1300 x 1050 x 1800 mm

Condition: excellent (used), Year of construction: 2018, operating hours: 12,714 h, Functionality: fully functional, For sale is a wire belt blasting system from the renowned manufacturer Rösler, model RDGE 1000-4 HD. The system is in perfect condition and fully functional. A viewing under power is possible at any time after prior arrangement by telephone. If you are interested or have any further questions, please do not hesitate to contact us. Dqwkwj

Year of construction: 2021, Condition: new, We've set the bar high with the development of three different oven types. A tunnel, cross and deck oven. The three furnace types ensure a solution for every production need and available production area. The deck oven is optimal where space is limited. In just 9 metres, 45 metres of drying are offered, as the oven is built in 5 floors. The deck oven is assembled and tested at the factory in Denmark before dispatch, and the deck oven is of course delivered assembled. This gives a short installation time and makes it easy to start production in your company. Common to the three types of ovens is an optimised drying process, which is done through a combination of IR and jet nozzle technology. Eao7Nzpf8 Technical data: Capacity: depending on the type of lactate Max length is oven specific - max width 1300 mm standard

Condition: reconditioned (used),  Wheelabrator Euro 80 Tumblast machine complete with: • 2 off 30kW blast wheels • Max. Load 2,500kgs • Max piece weight 220kgs • Chamber diameter 1800mm • 4BE air-wash separator • Hydraulic door • Mill torque converter drive  Platform extension with access ladder  Vibratory bottom screen  Media storage hopper with twin abrasive gates  Particle elevator  New hydraulic loader Dnh7J2  Hydraulic power-pack  New PLC electric control panel with HMI screen  Electrical trays and cabling Available • Transport to site • Unloading and positioning • Mechanical and electrical assembly • Commissioning and hand-over Excludes – dust extractor, ducting, vibratory discharge, power/air connections, civils.

Condition: good (used), filter system, clean air filter, fine filter, filter, compact filter, suspended matter filter, filter cassette, cartridge filter, cassette filter -Manufacturer: DCE, cassette filter suitable for ID34372 BTR Unicell C16-2K7 -Number: 4x filters available -Price/Delivery: complete -Dimensions each: 800/95/H500 mm -Weight: 4.5 kg/piece Dqweah

Year of construction: 2021, Condition: new, The tunnel kiln is delivered in modules of 6 meters. Each module consists of 2 zones, each with its own temperature and humidity control, which optimises the drying process. IR technology is available in each zone if you wish. B0Swdndz7M Inspection windows along the entire length of the oven provide optimal visibility and facilitate the introduction of new parts and varnishes. The operator can follow the product throughout the oven and adjust the temperature of each zone up and down as required. It's easier to run in new parts and adjust the individual zones when you can see what's happening in the oven metre by metre. The tunnel oven is a compact model that doesn't take up much height. This means that the overview of the production hall is maintained. Technical data: Capacity: depending on type of lacquer Max length is oven specific - max width 1300 mm standard

Condition: reconditioned (used), Year of construction: 2008, Pangborn M200 rubber belt blast 1 off 15kW blast wheels Max. Load 400kgs Bjlwjkqxksw Max piece weight 20 Chamber diameter 950mm Pneumatic door Platform extension with access ladder Vibratory top screen Media storage hopper Particle elevator Hydraulic loader Hydraulic power-pack New PLC electric control panel with HMI screen Electrical trays and cabling

Condition: good (used), filter system, clean air filter, fine filter, filter, compact filter, suspended matter filter, filter cassette, cartridge filter, cassette filter -Manufacturer: DCE, cassette filter suitable for ID34372 BTR Unicell C16-2K7 -Number: 4x filters available -Price/Delivery: complete Dqwd9T -Dimensions each: 800/100/H500 mm -Weight: 3.1 kg/piece

Year of construction: 2021, Condition: new, The trolley is supplied in modules of 6 metres length and each module is 2.5 metres in the direction of travel. Each zone has its own temperature and humidity control. This makes it possible to fully optimise the drying process. The drying oven has inspection windows along the entire length of the oven. This provides an optimal view and an easier running-in of new workpieces and lacquers. The operator can follow the product throughout the oven and adjust the individual zones up and down in temperature as required. The oven is a compact model that does not take up much height. This means that the overview of the entire production hall is maintained. Technical data: Capacity: depending on lacquer types B0Swaxjhjd Item dimensions: standard modules max. 6 m items

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system -Manufacturer: Wagner, paint sprayer paint spray system -Type: W 100 -Use: for varnishes and glazes -Area performance: 5 m² / 12 min -Dimensions box: 300/140/H260 mm -Weight: 1.5 kg Okhkf8Vmg

Year of construction: 2021, Condition: new, The Ceetec A250 machine is the middle machine of the painter series and is particularly suitable for larger craft companies, such as painters, carpenters, woodworkers as well as factories with some or larger production. The machine is mostly used as a manual machine, i.e. manual feeding and removal. If insertion into a production line is required, our Ceetec Industry series is recommended. The machine is delivered complete with brushes and filter bags and is ready for use as soon as the power is connected. Ceetec A250 is a standard machine and therefore also a stock item, which can normally be delivered from day to day. Technical data: Capacity: 18 - 42 meters/min L87Nk0A2 Embossing dimensions: 250mm*250 mm (option 380mm)

Condition: good (used), Thickness gauge, coating thickness gauge Bp8L3Y9Ezg -Manufacturer: Elcometer, cross-cut device with case -Type: Elcometer 107 -Material: stainless steel / aluminum -Accessories: see photos -Dimensions: 300/270/H75mm -Weight: 1.1 kg

Year of construction: 2021, Condition: new, DuoFlex Advanced is the market's most user and energy friendly "all in one" spraying machine in production line or as "stand alone". The sprayer has a built-in 19" touch screen, a user-friendly control program and low energy consumption, making DuoFlex Spray one of the most attractive sprayers on the market for painting doors, kitchen doors, furniture and other profiles. Revolutionary foil system makes the sprayer quick and easy to clean and minimises stopping time when changing colours. The time required for a colour change is just 2-3 minutes. Our wide range of equipment means you get a spraying machine adapted to your current production line. Pvx7X Technical data: Capacity: 2-10 meters/minute Item dimensions: up to 100 mm in height and up to 1300 mm in width

Year of construction: 2021, Condition: new, Reliable grinding machine for 380×250 workpieces for production line or as stand alone. With built-in touch screen, standard programs and adjustable brushes and feed speed, the IP 380 Touch paint machine provides consistent quality and high finish. Pv3P9 The IP 380 Touch is robust, simple to operate, easy to clean and designed to produce every day. This makes the IP 380 Touch one of the market's most attractive grinders for sawmills, model house manufacturers and industrial companies worldwide. Technical data: Capacity: from 20 m/m to 180 m/m Workpiece dimensions: 10×10 mm to 380x250mm

Year of construction: 2021, Condition: new, Ceetec IPS400 TopFlow Automatic is a fully automatic machine developed with the latest technology. With CNC control of guns gun positioning can be done during operation. This reduces overspray to a minimum. The machine is suitable for both indoor and outdoor wood coating and has a capacity of up to 200 metres per minute. The machine can be used as a stand-alone machine or included in line production with, for example, drying and automatic feeding. Ceetec IPS400 TopFlow Automatic is also produced according to customer specific requests. B0Sv7E2Dyx Technical data: Capacity: up to 200 meters/minute Standard 400*100 mm

Year of construction: 2021, Condition: new, The Ceetec P40 is the smallest machine in the range and is particularly suitable for smaller hand workshops, such as painters, carpenters, joiners and woodworkers. The machine's simple design makes it very easy to operate. The machine is on rubber wheels and can therefore be moved without difficulty. It is therefore also suitable for construction sites. The machine comes complete with brushes and filter bags and is ready for use as soon as the power is connected. Ceetec P40 is a standard machine and therefore also a stock item that can be delivered from day to day. Jxkgiq Technical data: Capacity: 1500 meters/hour Embossing dimensions: Max. H*W: 25*175 mm or 40*100 mm Min. L: 800 mm