Car Workshop equipment Offers
Number of drawer 7 Stück
Bg337u3i0r
weight ca. 80 kg.
** Including tool assortment 164 pieces **
Furnishing :
- 7 high quality drawers
- every drawer with a quick release system
- right side wall offers space for tools, cans etc.
- dimensions 752x450x980
- mobile
- upper support surface for tools, screws, etc.
Speedometer unit
-Manufacturer: Renault KBA zu2): -3004
Qk8f2a7st
-Model: Scenic KBA zu3): 575
-Model type: 1.6 16V ABS: Yes -Gear type: Manual
-Engine code: K4M 700 - Fuel type: gasoline
-Year of construction from: 09/1999 Power kW: 79
-Year of manufacture to: 08/2003 Cubic capacity cc: -1598
7
150 €
Starting bid plus VAT
28 days left
28 days left
Kraft Müller, KM-36, with 2 batteries
Hvybqai
weight max. 11,2 t
material hochfest
Bmai7y9v
length in total ca. 4000 mm
range L-W-H 745 x 525 x 915 mm
weight 93,5 kg
7 St.
Tool trolley filled with:
3 pcs. Different socket sets, double end wrench,
Double ended ring spanners, wrenches, pliers different,
Screwdrivers, Allen screwdrivers, files, hammersSaw, etc.
Tool Steel: Chrome Vanadium
Nwzzh
5 pcs. Drawers filled with tools
2 pcs. Drawers empty
This exhaust extraction unit, is a 230 VAC model, for hanging on any wall, including some discharge piping.
Pvvare
Pulling the flex hose, is an automatic ON status, while relieving the hose will start an OFF status. The mass in about 100 kg. All in a perfect direct use.
3 Bus Rollovers with lot of extras. Cap. 20 vehicles per hour max 160 vehicles per day. Ca. 750 liters water per vehicle. Inflow waste water 15 m3 till 120 m3 per day. 2 Heigh pressure pumps for bottom cleaning.
98% recycling from waste water
Bwzu0qtoq0
Muffler, exhaust system, muffler, silencer
-Version: made of stainless steel
-Type: MUF 129-04
-Ferrari: 168988
Liaqt
-for: Ferrari 355
-Weight: 35 kg/net
12
250 €
Starting bid plus VAT
28 days left
28 days left
with various small tools (new), 7 drawers + 1 side compartment
Jw8d03
weight max. 13,65 t
material hochfest
Stddu0
length in total 6000 mm
weight max. 2,75 t
0 90 mm
0 520 mm
weight 42 kg
Bogx09ydpb
dimensions 820 x 410 x 200 m
Toggle press for brake lining rivets
Riveting press
Height without lever 350 mm
Installation height 200 mm
Cs0zprx8
throat 100 mm
table surface 170 x 170 mm
total power requirement 380 Volt
weight of the machine ca. 100 kg
Krjcxazx
Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump
-operated: pneumatic
Hdoh7rt
-Reel
-Hose: 6 m
-Manual valve with volume indicator
-Number: 3x pumps with reel available
-Price: per piece
-Weight: 60 kg/piece
9
330 €
Starting bid plus VAT
28 days left
28 days left
with various small tools (new), 8 drawers + 1 side compartment (orange)
Y02b8
internal diameter: mm
Pcdjf2tv
swing diameter: mm
grinding depth: mm
dimensions of grinding wheel: Ø 65 x 25mm (Topfscheibe) mm
feed:: 0,05 - 0,40 U/min / 8 step U/min
total power requirement: ca. 1,1 kW
weight approx.: 1060 kg
dimension machine xH: 1,1 x 1,1 x 1,4 m
Brake Drum Grinding Machine
- turning Ø max./min.: 800 / 320mm
- brake drum holder: 63mm, quill stroke 120mm
- turning support: longitudinal travel 380mm; transverse travel 200mm
- steel holder holder: 180 x 140mm, steel holder 58...
Number of tools 599 St.
weight 12,5 kg
Bizlpbl3vz
range L-W-H 375 x 215 x 525 mm
Tool trolley filled with:
3 pcs. Different socket sets, double end wrench,
Double ended ring spanners, wrenches, pliers different,
Screwdrivers, Allen screwdrivers, files, hammersSaw, etc.
Tool Steel: Chrome Vanadium
5 pcs. Drawers filled with tools
2 pcs. Drawers empty
Complete spotter set 380V 3500 Amp + CE Complete spotter set Suitable for: - Spotting - spot welding (from 1 side) - Shrinking of metal Delivery scope: - Spotter machine - 2x pullers large and small - various electrodes for spotting. - Carbon stics for shrinking - Basic assortment and accessories belonging to Spotter Technical data: - voltage 380V - fuse 16Amp - maximum welding current 3500 Ampere adjustable 30 to 100 % - welding voltage 5-13V - spot welding thickness 0.8 + 1.2 mm - timer 0,1-9,...
4
27 days left
hall bridge overhead travelling crane, manufacturer: DEMAG, year of construction: 1995, condition: 1 hoist defective, lifting capacity: max. 2x 3,2 to, span: approx. 16 m, pick up after arrangement, crane is still used for loading
Bwsd0ixzqe
Used oil collection container
Lh8yv
-Container: Ø 660 x 1250 mm
-Container: tiltable
-Own weight: 30 kg
12
350 €
Starting bid plus VAT
28 days left
28 days left
with various small tools (new), 8 drawers + 1 pull-out side compartment (green)
Btcripjm
internal diameter: mm
swing diameter: mm
Qn0pt9u
grinding depth: mm
total power requirement: ca. 1,1 kW
feed:: 0,05 - 0,40 mm/U / 8 step U/min
weight approx.: 1060 kg
dimension machine xH: 1,1 x 1,1 x 1,4 m
Brake Drum Grinding Machine
- turning Ø max./min.: 800 / 320mm
- brake drum holder: 63mm, quill stroke 120mm
- turning support: longitudinal travel 380mm; transverse travel 200mm
- steel holder holder: 180 x 140mm, steel holder 58mm, turning tool for insert holder 20 x 20mm
- operation via c...
Number of tools 155 St.
weight 9,5 kg
range L-W-H 350m x 250 x 250 mm
Bogyd72mh9
Tool trolley filled with:
3 pcs. Different socket sets, double end wrench,
Double ended ring spanners, wrenches, pliers different,
Screwdrivers, Allen screwdrivers, files, hammersSaw, etc.
Tool Steel: Chrome Vanadium
5 pcs. Drawers filled with tools
2 pcs. Drawers empty
Complete spotter set 380V 2000-5000 Amp + CE Complete spotter set Suitable for: - Soldering of rings and threaded ends - Spotting - Shrinking of metal Delivery scope: - Spotter machine on truck - 2x impact wrench large and small - various electrodes for spotting. - Carbon stics for shrinking Technical data: - voltage 380V - fuse 16Amp - maximum welding current 5000 Ampere - welding voltage 6-13V - spot welding thickness 0.8 + 1.2 mm - timer 1-10 sec in steps of 1 sec - weight 40 kg order 380V pl...
transport trolley for barrels with content of 200 litres
X9jno
operating pressure 8 to 24 bar max.
scope of delivery as it is shown in the pictures
space requirements width - 800 x depth - 800 x height -
1,300 mm
weight approx.
Compressed air pump for fresh oil, remote oil equipment, oil dispenser, oil filler, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifuge gear oil pump
-operated: pneumatic
-Number: 2x pumps with reel available
-Price: per piece
-Weight: 20 kg/piece
Qlfqv9o2h
mobile welding fume extraction system
ESTA SRF-1900 MP
Bwpsv3ud93
lifting capacity: 300-400 kg
Brl7di77vp
height over floor: mm
weight: 97 kg
Lifting height: max 350 mm
dimensions L x W x H: 0,85 x 0,60 x 1,50 mm
Built from sturdy steel construction, welded.
The lifting device is movable. Movable by the 4x wheels (2 of them swivel) and with brake.
Hydraulics: Manufacturer ORSTA-Hydraulik
The lifting is done by hand lever at 15 MPa
The load is carried/lifted by a steel plate 400 x 400 x 3mm.
Number of tools 47 St.
weight 12,5 kg
range L-W-H 375 x 215 x 525 mm
Tool trolley with 47-piece tool set.
Large inner compartment with several pockets. Outside 4 additional storage
compartments, lockable with zipper.
Tool set 47 pieces in a plastic case. Suitable for small jobs in and around the
house and on the go.
Xr87ntl3
See pictures.
Steel roof construction
Place: A- 1140 Vienna, Albert-Schweitzer-Gasse 9
Hall demolition: steel roof construction, office furniture, equipment
Item no.: 164
Steel roof construction
total height: 6,5 m, length: ca. 23 m, width: ca. 21 m
Negotiation price: € 900,-- net
Further information on request!
Constantly over 5000 running meters of pallet racks
from numerous manufacturers in stock.
(Changes and errors in the technical data, specifications and prices
and prices as well as prior sale rese...
Technical parameters Model HD-ALU Power supply 1ph 230V Rated power 1.5KVA I2 max 200-42000A Capacity 96000uf Fuse 15A Output voltage 20-200V Welding mode Manual Cable length 3m 35mm2 Packaging size 380x600x980mm Gross weight 45kg Packing Polywooden Certification ISO CE
Bqli7gxczy
Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers
-for: large cable lugs, hoses
-to: 60 mm²
-Number: 9x hand pressing teeth available
Qlvmhb23o
-Price: per piece
-Dimensions: 650/220/H45 mm
-Weight: 8 kg
Sunne PG-400EM
Gxn2oc
Calibration micrometer
Diameter range: 2,29mm - 38,3mm {.090" - 1.500"}
This setting fixture is used to set PGE-3000, PG-800, PG-810, PG-700 and PG-710 Precision bore gages.
Shunting jack used , 2 t , length 1,40m
Ibl3hz9
Number of tools 228 St.
weight 14,5 kg
range L-W-H 440 x 330 x 150 mm
3l38uzyn
Tool trolley filled with:
3 pcs. Different socket sets, double end wrench,
Double ended ring spanners, wrenches, pliers different,
Screwdrivers, Allen screwdrivers, files, hammersSaw, etc.
Tool Steel: Chrome Vanadium
5 pcs. Drawers filled with tools
2 pcs. Drawers empty
Max. load: 150kg
Height: 3,80m
Weight: 14kg
Colour: silver
Ladder standing height: 2,90m
Number of stairs: 12
Working height: 4,90m
Aluminium telescopic ladder with "soft-close-technology"
2 ladder hooks made of flexible material at the upper end of the spar for hanging onto the shelf traverse for ladder use
Suitable for the use of normal storage rack traverses as well as round traverses of inclined floor racks
When not in use, the telescopic ladder can be retracted quickly and comfortably and...
Complete spotter set 380V 2000-5400 Amp + CE Complete spotter set Suitable for: - Spotting - spot welding (from 1 side) - Shrinking of metal Delivery scope: - Spotter machine on trolley - 2x pullers large and small - various electrodes for spotting. - carbon stics for shrinking - case and accessories belonging to Spotter Technical data: - voltage 380V - fuse 16Amp - maximal welding current 5400 Ampere - welding voltage 6-13V - spot welding thickness 0.8 + 1 mm - timer 1-10 sec in steps of 1 sec ...
Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump
-Hand: operated
-with: return to the tank
-Number: 2x pumps available
-Price: per piece
9qydp8mcc
-Dimensions: 580/590/H1005 mm
-Weight: 70 kg/piece
Sunne PG-400EM
Calibration micrometer
Diameter range: 2,29mm - 38,3mm {.090" - 1.500"}
Ifkp93zf3
This setting fixture is used to set PGE-3000, PG-800, PG-810, PG-700 and PG-710 Precision bore gages.
Drip pan make Hoffmann
width 3380 mm
depth 1300 mm
height 730 mm
Ghbmbjj8c
Inner height 620 mm
range L-W-H 780 x 480 x 1050 mm
weight 79,5 kg
6 St.
The tool trolley is equipped with 6 storage drawers.
The tool trolley is equipped with 2 normal and 2 swivel wheels,
one of them with a brake.
The tool trolley is fully lockable thanks to an integrated lock.
Drawers can be locked per drawer.
All drawers are equipped with a quick release and a cushioning
fitted.
Cr38jonk
Height-adjustable storage compartment behind the door.
Central locking with 2 keys.
Tool trolley is equipped with 155 pie...
The rotating platform has 4 external access ramps (included in the price) It is adjustable in length (wheelbase) and width (track) for cars up to 2000 kg. The 220 volt drive motor with gearbox and friction wheel turns the entire car slowly and endlessly in a circle. The device is designed for continuous operation.
Mwb7aw
Complete spotter set 380V 7000 Amp + CE Complete spotter set Suitable for: - Spotting - spot welding (from 1 side) - Shrinking of metal Delivery scope: - Spotter machine - 2x pullers large and small - various electrodes for spotting. - Carbon stics for shrinking - Basic assortment and accessories belonging to Spotter Technical data: - Voltage 380V - Fuse 16Amp - Maximum welding current 7000 Ampere adjustable 30 to 100 % - Welding voltage 5-13V - Spot welding thickness 0.8 + 1.2 mm - Timer 0,1-9,...
Filling station for oil, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump
-operated: by hand
-2x: separate tanks with pumps
-with return: into the tank
-Dimensions: 800/530/H1100 mm
-Weight: 88 kg/piece
9sddpddgl
Sunne PG-500EM
Calibration micrometer
Bvuqrn3ort
Diameter range: 37,7mm - 74,3mm {1.500" - 2.900"}
This setting fixture is used to set PG-800 or PG-810 Precision bore gages when equipped with PG-250 Extension Fingers.
Numbers of drawers: 6
Height: 900 mm with wheels
Weight: 47 kg empty
Colour: RAL5005
Mobile: Yes
Width: 775 mm
Depth: 475 mm
Material thickness: 0,8 mm
Material: Steel
The compact helper of the craftsman
Compact and robust, our WZ220 workshop trolley is the perfect all-rounder when it comes to manual work. Its practical dimensions (683 x 900 x 460 mm) allow it to be used comfortably while standing or sitting, without any great bending down or reaching up. Four of the six integrated drawers (54...
range L-W-H 780x480x105 mm
weight 79,5 kg
7 St.
Tool trolley filled with:
3 pcs. Different socket sets, double end wrench,
Bh0mu8hujf
Double ended ring spanners, wrenches, pliers different,
Screwdrivers, Allen screwdrivers, files, hammersSaw, etc.
Tool Steel: Chrome Vanadium
5 pcs. Drawers filled with tools
2 pcs. Drawers empty
