Chemico-pharmaceutical machinery for sale
TOP CATEGORIES
ALL CATEGORIES
Boiler
2
Capsule machinery
7
Centrifuges
34
Choppers
2
Containers
221
Conveyors
57
Dosing systems & batchers
2
Drying plants
2
Exhaust systems
6
Filling-, closing machines
7
Filtering units
201
Heat exchangers
237
Heat treatment
8
Laboratory installations
26
Mills
20
Mixer
238
Other machinery
140
Packaging machines
7
Presses
47
Pumps
20
Reactors, boilers, containers
357
Scales
4
Sewage works
1
Stirring & Mixing equipment
204
Stoves
4
Chemico-pharmaceutical machinery
Offers
Powder turbo mixer , Make Hosokawa Micron bv, Type Cyclomix 250, No. 6668601000, New 2002, Material Stainless steel, Working pressure 0.95 Bar, Working pressure jacket 3 Bar, Capacity 250 Ltr, Inlet dia. 230mm,, Top connections dia. 100mm, 2x dia.55mm, Outlet dia. 230mm, With jacket 26 Ltr, Glands air purged mechanical seal, Motor 22 KW, 400/690 Volt, Speed mixing shaft 20 - 250 rpm, Mounted on frame , Floorspace 2,5x1,3 M, Total height 2,3 M, Weight 2000 KG, Extra Specifications loopschuif What... more
BIOSTAR VII, Ser.No. 71187, year 2019, power: 230/115/100 V, 750 W, working pressure: 0.5 - 6.0 bar, dimensions (W × H × D): 520 × 240 × 440 mm, weight: 14 kg, with laboratory compressor PLANET-AIR L-S 20-4, year 2017, max. pressure 8 bar, delivery rate 11.5 l/min, tank volume 3.5 l, sound level 38 dB(A) - No. 2015, Item 3
On behalf of the entitled persons we sell a thermoforming machine BIOSTAR VII.
Bly0esv7ts
The general terms and conditions of Lüders & Partner GmbH apply more
ready for operation (used)
General
Bremen site
Condition used
Container
volume 13.390 litres
Vacuum 1.0 bar
Max. overpressure 6,0 bar
Max. permissible operating temperature 200 °C
Type hanging
Heating/cooling jacket
Volume double jacket 415.0 litres
Max. permissible operating overpressure 6.0 bar
Max. permissible operating vacuum 1.0 bar
Max. permissible operating temperature 200 °C
Temperature control cylinder half pipe coil
Temperature control underbody ha... more
used
Horizontal conveyor screw (1x), Make Van Tongeren Kennemer B.V. Beverwijk, Type PSC-350, . 10.1018, Material Stainless steel 1.4301 (304), Diameter 350mm, Length 1100mm, Between inlet and outlet ± 700mm, Shaft diameter 170mm, Pitch 145-240mm, Inlet 350x400mm, Outlet dia. 370mm, Motor 2,2 KW, 230/400 Volt (Ex), Screw speed ± 27 Rpm, New 2010, Floorspace 2,4x0,5 M, Total height 0,7 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. ... more
BIOSTAR VII, ser. no. 71355, year of manufacture 2019, power: 230/115/100 V, 750 W, working pressure: 0.5 - 6.0 bar, dimensions (W × H × D): 520 × 240 × 440 mm, weight: 14 kg, with laboratory compressor PLANET-AIR L-S 20-4, max. pressure 8 bar, delivery rate 11.5 l/min, container volume 3.5 l, noise level 38 dB(A) - No. 2015, Item 4
On behalf of the entitled persons we sell a thermoforming machine BIOSTAR VII.
The general terms and conditions of Lüders & Partner GmbH apply.
Hmvjph9ly more
ready for operation (used)
General
Bremen site
Condition used
Container
volume 1.517 litres
Vacuum 1.0 bar
Max. overpressure 6,0 bar
Max. permissible operating temperature 200 °C
Upper bottom screwed lid
vertical design
Stand Feet
Number of feet 4 pieces
Heating/cooling jacket
Double jacket volume 183.0 litres
Max. permissible operating overpressure 6.0 bar
Max. permissible operating vacuum 1.0 bar
Max. permissible operating temperature 200 °C
Temp... more
unexamined (used)
From laboratory operation devices and accessories for sale:
D2hiyqn
- Agilent 6890 Series Injector Sampler
- Sample plate
- HP 7673 Controller
- Thermodesorber Accessories
Condition: used, functionality unchecked stored there
Pick up in 61440 Oberursel or shipping against payment more
Static oven with the following characteristics: Useful heating dimensions LxWxH mm 1250x900x1680, Maximum working temperature 150 ° C, internal chamber in stainless steel. Double ventilation from the back of the oven, horizontal ventilation with entry into the chamber from the side walls and exit from the rear wall. Heating with finned resistances (12 Kw). Operating voltage 3x400V 50/60 Hz. Without insulated bottom.
Bkm7zb87lk more
Closed stirring vessel , Make DE RIJK RVS, Type 2.2 OF, No. 284898, New 1987, Material Stainless steel, Working pressure 5 Bar, Vacuum possible , Capacity 1000 Ltr, Vessel sizes Dia. 1100 x 1100mm, Dished bottom , Dished top side , Manhole Dia. 440 mm, Top connections 2x Dia. 40mm, 2x Dia. 45mm, Dia. 50mm, Dia. 65mm, Outlet Dia. 45mm, With jacket , With propellor stirrer (Magnet), Motor 0,3 KW, 90 Volt (DC), Speed mixing shaft 0 - 138 Rpm, Floorspace 1,6 x 1,7M, Total height 2,0M, Weight 1250 KG... more
used
Used QVF 100l glass flasks - we have a large quantity available with differnt necks on different models. Please contact us for further details and for configurations of necks available
Oc2nr more
as good as new (ex-display)
For sale from LAB2 in The Netherlands: Thermo Ultimate 3000 HPLC including:
- DGP-3600MB Ultimate 3000 pump
- VWD-3400 Ultimate 3000 VWD
- WPS-3000TB Ultimate 3000 sampler
B2czvhfi
- FLM-3100B Ultimate 3000 flow manager
- Solvent holder
Also available:
Agilent 1100 and 1200 series with DAD, FLD, RID Detectors
Agilent 1100 and 1200 series modules
In combination with MS systems from Agilent, Thermo, Siecx, Waters, Shimadzu
We're not a agent/reseller. All products on our website are in stock and ... more
ready for operation (used)
General
Bremen site
Condition used
Container
volume 1.000 litres
Type Container
Stand Frame
Technical data / dimensions
Total width 1,030 mm
Total length 1,230 mm
Equipment
Manhole / dome in the top soil (DN 400)
Outlet available
Note Traces of use
Remarks Slight differences in design; dimensions may vary slightly; Fe frame (galvanized); total height 1,560 - 1,650 mm;
B27t3jts
Test reports mostly available
final use Spirits
Material Qua... more
2003
repair required (used)
GC/MS in need of repair from laboratory operation for sale
Agilent 6850 network GC system with Agilent 5973 network MSD
- Configuration: Detector is MS only, no autosampler
- Year of construction: 2003; year of installation: 2004
- Date of decommissioning: 01/2020
- Reason for decommissioning: PC defective, device was running fully in operation until then
- Functionality of the modules: backing pump oiled, otherwise OK
- Pump type in 5973 MSD: Diffusion pump
- Without autosampler
Oelab
- Manual,... more
N° of Stations 39 Output tablets per hour 79.560 - 234.000 Maximum tablet diameter 11mm Maximum depth of fill 17,5 mm Upper punch entry 1.5 - 8 mm Die diameter 24 mm Die height 22.22 mm Upper/lower punch length 133 mm Compression force 65 kN Power 3.75 kW Net weight 1000 Kg. Worked hours: 10000
Gazbq9ct3 more
Horizontal conveyor screw "Easy clean" (1x), Make unknown (manufacturer tag is missing), Material Stainless steel, Diameter 260mm, Length 1100mm, Between inlet and outlet ± 800mm, Shaft diameter 60mm, Pitch 100-175mm, Inlet dia. 300mm, Inlet flange dia. 400mm, Motor 3,0 KW, 400 Volt, Screw speed ± 78 Rpm, Floorspace 2,2x0,6 M, Total height 1,0 M, Weight 400 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shi... more
Used heatable / coolable stainless steel agitator vessel with double jacket and insulation
N0ygh
Item number: 10501
Final use: Chemicals
Volume: approx. 600 L
Type: Standing on feet
Material (wetted parts): 1.4301 / AISI304
Design: Double jacket with welded-in insulation
Top soil: conical bottom
Underbody: conical bottom
Tank dimensions:
Container diameter: 1210mm
cyl. height: 633mm
total height: 1730mm
total width: 1270mm
Wall thickness (double jacket + insulation): 110mm
materials:
Interior: ... more
as good as new (ex-display)
For sale from LAB2 in The Netherlands: Perkin Elmer HGA-900 Graphite and furnace AAS
Complete working system with new burner, autosampler, lamps, software, computer, cables, etc.
Also available:
Other Atomic Absorption Systems like Agilent 240FS, Varian 220FS, 220Z Furnance, 240Z Furnance
New and used parts for Perkin Elmer AAS systems
We're not a agent/reseller. All products on our website are in stock and can be delivered with installation by our own service engineers. All systems are deli... more
ready for operation (used)
General
Bremen site
Condition used
Other flanges and beams of Fe; 1 small connection bent (see photos)
Heat exchanger
Exchange area 57,0 m²
last use Gasket production
Mantle space
Volume jacket space 590 litres
Gkwofgx33
Sheath material AISI316 (V4A) 1.4571
Max. permissible operating overpressure jacket space 10.0 bar
Max. permissible operating vacuum, jacket space 1.0 bar
Max. permissible operating temperature jacket space 250 °C
Pipe room
... more
2012
excellent (used)
Fritsch Universal Cutting Mill Pulverisette 19 with tungsten carbide disc mill for ultra-fine pulverization, start-up 2012, little used from laboratory operation
- 1.5 kW, 230 V, 1~, 50/60 Hz, 3 Nm
- with 2l sluice funnel with slide
- side milling cutter rotor p-19 cpl. carbide tungsten carbide
Bl2p7mde2m
- Sieve cassette p-19 Stainless steel 0.5 mm trapezoidal hole
- Collecting tank 3l
- on universal tripod
- Operating Instructions
Similar to the picture with stand, because stored dry it cannot... more
Diefenbach and Malisardi INOX filter press. Surface 61sqm - n. 28 pairs of plates 1000x1000x20mm - P.max 5 ATE - staf. manual - useful volume 500lt - piston stroke 800mm - closed exhaust - new pneumatic control unit.
Gayys2z08 more
Horizontal conveyor screw (1x), Make unknown, Material Stainless steel, Shaft with ribbon , Diameter 100mm, Length 1200mm, Shaft diameter ± 40mm, Pitch 45mm, Inlet 500x120mm, Outlet dia. 100mm, Motor 0,73 KW, 380 Volt, With covers , Floorspace 1,4x0,3 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Vi... more
