Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating hours: 16,000 h, 2012 Intermac Master 33c CNC C-axis (for groove) AND T-axis Bed size 1500x3000mm Selection of cups and tools included This CNC can be used for stone or glass. It was originally used as a stone machine but i use it for glass processing. We have two of these machines, we are replacing this one with a larger Master 38.3, machine in perfect working order and can be seen running in our factory right now. Can show buyer the basics on how to use machine. Can also dismantle and load machine for buyer. Can help out with installation. Have more detailed pictures and videos if required Ibolhcszi T Uqodw Hsa

Year of construction: 2013, condition: good (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the carriage for maximum cutting precision; Water collection tray with integrated water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Ielezu A N Iehcdw Hsba Mobile Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: AI/086060718, overall weight: 3,450 kg, total length: 5,500 mm, total width: 2,400 mm, total height: 2,400 mm, operating pressure: 6 bar, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 1,400 rpm, Denver Skema Logic from 2018, in good condition, for automatic and manual operations. New wooden bed has been fitted, cleaned and tested. Ibolhcdwjzcm Uxe Hsa Front safety photocells can be added on request.

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Ibjlhcdevdu N Aow Hja

Condition: ready for operation (used), Year of construction: 2016, A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible. Ibjloyxq T Sehcdw Hsa

Condition: ready for operation (used), A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible. Iolheyypmmecdw Hjba

Year of construction: 2002, condition: ready for operation (used), Max. load capacity: 1t, with documentation, on-site inspection is possible. Ibelhjrkn Uzjcdw Hoa

Year of construction: 1978, condition: ready for operation (used), A completely overhauled Kleemann large-format screening plant for the mining and recycling industry is available. Screening decks: 2, screen width: 1800mm, screen length: 5200mm, screening area per deck: 9.36m², total screening area: 18.72m². Overhaul: springs, base frame, cardan shaft, tensioning devices and electric motor. An on-site inspection is possible. Ijlhjzb Nktecdw Hsba

Year of construction: 1989, condition: ready for operation (used), A grain screening machine (vibrating screening machine) Främbs & Freudenberg for the mining industry for separating aggregates is available. Number of screen decks: 1, drive power: 7.5kW, speed: 1060rpm, lubrication: oil, oil filling quantity: approx. 2l, screen area X/Y: 4000mm/1500mm. Without screen lining. An on-site inspection is possible. Ijlhsy R Dtvecdw Heba

Year of construction: 2007, condition: ready for operation (used), A heavy-duty pre-screening unit ABR for the mining industry for separating aggregates is available. Inclination: 15°, screen area X/Y: 5000mm/2000mm, number of decks: 1, screen area: 10m², machine dimensions X/Y/Z: approx. 5500mm/2400mm/1500mm, weight: approx. 10000kg. Without a screen. An on-site inspection is possible. Islhcsy R Dtpedw Heba

Condition: good (used), Manufacturer: Hazemag Type: SAP 4 Inlet Size: 650 x 450mm Islhcdwjg Stzbo Hoba Electrical Motor: Included See PDF-file below for more detailed information.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, TECHNICAL DETAILS Islhcozuyryjdw Hoba Travel range X-axis: 3,700 mm Travel range Y-axis: 2,100 mm Travel range Z-axis: 370 mm Rotational range C-axis: 0–362° Swivel range A-axis: 0–90° Travel time C-axis (0–392°): 3 s Travel time A-axis (0–90°): 2 s Spindle speed: 6,000 rpm Spindle power: 16.5/56 kW Speed X-axis: 30 m/min Speed Y-axis: 30 m/min Speed Z-axis: 5 m/min Dimensions of tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade inclination (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Year of construction: 2013, condition: excellent (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the support for maximum cutting precision; Water collection tray with built-in water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg Ielhcdwji Akvvo Hjba - immediately available -

Year of construction: 2018, condition: used, functionality: unexamined, Sasso K500 CNC bridge saw (2018) 3 axis Ibslhcezc Rgredw Hsa Also available from the same location - Bellani Modulo edge polisher (2010)

Year of construction: 2010, condition: used, functionality: unexamined, Bellani Modulo edge polisher (2010) Ibelhcdjzc Rf Ijw Hoa

Condition: used, Year of construction: 1996, machine/vehicle number: 544, functionality: fully functional, Multifunction machine for processing natural and artificial stone. Ibjlhcjzrabpodw Hea Ideal for the tombstone, restoration, and construction sectors. Z-axis height adjustment: 600 mm. X-axis travel: approx. 4500 mm. Pneumatic pressure control (ideal for grinding, polishing, and brushing surfaces). Variable speed drive motor: 250-2950 rpm. Articulated arm locking system. Hydraulic side grinding mechanism. Work table. Marble grinding unit. Granite grinding head.

Year of construction: 2002, operating hours: 200 h, condition: good (used), functionality: fully functional, Due to closure, everything must go at bargain prices: 1 Thomas sawing machine, used for 1 year, with table and spare parts. 1 small Italian sawing machine, 4 meters long. 1 high-end vacuum lifting device, large model, used for 6 months. 1 digital molding machine. 1 dust extraction table. 1 dust extraction cabinet. 1 dust extraction system with articulated arm. 1 screw compressor. Ielhcdozut R Njw Heba Come and see or request videos via WhatsApp.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 76020, travel distance X-axis: 3,800 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 320 mm, table width: 2,400 mm, table length: 3,800 mm, Breton Genya is the advanced cnc bridge saw for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen tops, vanity tops or claddings. The indicated price does not include disassembly and subsequent installation costs. Ibelhcdozrfadew Hsa

Year of construction: 2011, operating hours: 6,342 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3729, Support track width 3600 mm Support height adjustment 400 mm Cut-off wheel, max. 725 mm (max. cutting depth 255 mm) Motorized support swivel, 0-90° stepless Isljzqu A Sehcdw Hsba Main motor speed regulation 900-4300 rpm Camera Extension of bridge travel rails Steel tilting table with hydraulic tilting function, 3500 x 2000 mm Horizontal blade flange (500 mm) Laser Software: GMM CAD / MiniCad / Profile Automation

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 23907, total length: 3,750 mm, total width: 1,800 mm, table height: 780 mm, overall weight: 3,000 kg, UPDATE: Machine is reserved!!! COMANDULLI edge grinding machine, model PENTA 5+4 SX Belt running direction: LEFT to RIGHT, year of manufacture 2008, #23907 • New conveyor belt, May 2025 • 5 end-face grinding supports, 130 mm, with vertical oscillation • 2 pneumatic lower supports / 2 upper supports • Water groove milling support, manual height and side adjustment • Chamfering support, manual height and side adjustment • Table extension console • Water trough • Space required approx.: 375 x 180 cm Pricing • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments and accessories shown in the pictures are not included with the machine/scope of delivery Payment terms • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty • Machine sold “as is, where is” without any warranty claims Inspection possibility • At the company location near Düsseldorf Availability Ielhcozrlkiedw Hsba • After delivery of the new machine, approximately November/December 2026

Condition: good (used), Manufacturer: Takraf / Zemag Type: ZWB 630 x 800 -1 Roll Dia.: 630mm Roll Width: 800mm Included frame and electrical motors. Ibolhcdopxn D Iow Hoa

Condition: good (used), Year of construction: 2008, Model: GIPO 110 Year: 2008 Caterpillar engine Ibolhcdwszbvbro Hsa Capacity: 200 tons/hour Number of operating hours: approximately 8000 New hydraulic pump Includes the screening unit.

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Ibelhcdoxdi Agew Hea

Condition: excellent (used), Year of construction: 2014, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 08614, total length: 6,900 mm, total width: 2,200 mm, total height: 2,300 mm, table length: 3,500 mm, overall weight: 5,500 kg, power: 6 kW (8.16 HP), Used edge grinding machine, Speedy System D8, with 8-position automatic tool changer, manual rotary table, and 4 rows of pneumatically adjustable universal rollers. Ibjlhcdszm Ec Ujw Hoa

Condition: used, Year of construction: 1995, x-travel 1700 mm y-travel 400 mm z-travel 400 mm Control Siemens 480 D Number of axles 4 St. table width 500 mm table length 2000 mm tooltaper DIN 2079 SK 60 SK 40 total power requirement 16,25 kW Ibjlhcjvf Rhwodw Hja weight of the machine ca. 4750 kg dimensions of the machine ca. 3000x 2500x 2800 m Machine number 9599 - 4th axis / horizontal / diam. 315 mm - Chip conveyor - tool changer for 20 tools