Reaction container, batch system, solids separator, washing trough, painter's washing area, water treatment, tool and water cleaning
-Transfer: in current condition as seen
-Batch system with a reaction tank: from 105 liters
-Dimensions: 1400/840/H1800 mm
-Weight: 290 kg
Qkt8kewui
This tank is bolted to a frame. It is connected to a pump for draining into an IBC .Also included ibc cap accessory and control panel
2m Tall
Ia9cs03kc
This tank was used in the printing industry for blanket wash storage and draining
I am offering a high-pressure pump from Abel. Delivery rate 15,3 m3 / h, max. 100 bar, motor 55 kW, year of construction 1994. A correct invoice can be created.
58762 Altena
Bp9dhtz8kh
We only deliver this machine within our sales area; Netherlands, Belgium, Luxembourg & Germany (zip code 40-59)
Rösler – Specialist in surface technology
Rösler is the only surface finishing supplier in the world that offers the two most essential finishing technologies, mass finishing and shot blasting, as well as industrial washing systems and in-house production and development.
In addition to a wide range of machines available from stock, Rösler also supplies used and demo machines, servi...
Overhead beam filterpress with total cake volume of 3500 liter, mounted on a trailer. Both sides of the trailer are extendable with walkways for the operators and light curtains.
Elektrical box with PLC, pumps, mixing tank installed on the neck of the trailer.
Zthzhjc7
Double AISI screw mounted below the press for cake evacuation. Extra screw to connect with cake container also included.
Seperate container with polymere dosing installation and dosing pumps are part of the scope of supply.
Total ...
Gas flare system complete with new controls(2019) and new EX side channel compressor Gardner Denver built 2019.
It is a steel shell with ceramic fiber insulation up to 1250 ° C temperature.
The flare and pilot burner assembly is automatically controlled and secured with a UV probe and solenoid valves.
Cfwsvvd3
The ignition of the flame of the control burner is automatically controlled and is carried out according to the HV spark principle at the ignition electrode.
The combustion air of the mai...
Water Treatment Plant comprising 90cum Sodium Hydroxide Tank, 24cum First Neutralisation Tank (T11) with stirrer, 22.5cum Second Neutralisation Tank (T12) with stirrer, 315cum concrete Holding Tank, and output concrete Flume, Control Equipment including level controls, online pH monitors, flowmeters, pumps, piping and valves, commissioned 2018 by Agfa and commenced service in 2019, the system was designed to neutralise acidic effluent (in the region of pH1) by addition of alkali (sodium hydroxid...
SEEPEX Macerator, brand new, never used from 2012. 2 pcs available. For municipal waste water sludge handling or other purposes. 3x400V 50 Hz
0 running hours
Ybois
I am selling 3 identical Geho piston diaphragm pumps, type ZPM 400, 15 m3 / h, max. 28 bar, built in 1983 and 2 in 1999, length approx. 3500 mm, weight approx. 4000 kg, were on a sewage treatment plant for pumping sludge for kilometers ...
A correct invoice can be written.
Pick-up in 42781 Haan or 58762 Altena ...
Eqcnxsl
Delivery against assumption of costs also possible ...
The price is per piece.
ACO Multi-Pro-Pe-K30-Duo / So
These systems are used to collect and automatically lift wastewater containing and free of faeces from toilets, bathrooms, washrooms and showers in residential or commercial premises with large volumes of wastewater. After fat separation systems. For long pressure pipes with greater height differences
Bvvxywu9fh
Year of production 2015
Area of application: residential houses, smaller commercial buildings with a lot of waste water, after grease separators up to NS 20...
Tank farm associated with thermophilic anaerobic digestion plant including
2x Approx. 45,000 litres clad & insulated stainless steel silos each with top mounted agitator
2x Approx. 50,000 litres clad & insulated stainless steel silos each with top mounted agitator
4x Approx. 20,000 litres clad & insulated stainless steel silos each with top mounted agitator
2x 45,000 litre welded steel horizontal storage tank
Hrlnapw2
Enquiries for the complete tank farm or individual tanks welcomed
I am offering 2 reconditioned chamber filter presses, plate format 300 x 300 mm (10 filter plates) with spindle lock for sale.
Btujs30yok
Drip tray and filter trough (new) in PP are also installed. Stainless steel inlet with flange, open outlet. 2 identical presses available. Without filter cloths. Price is per piece. Location is 58762 Altena
Operating and assembly instructions are available. The centrifugal pump was never used and is as good as new. Since we have no possibility to test it but is sold as defective without warranty and guarantee.
7yb8ma0
2 pieces Centrifugal pump with 3 channel impeller with large orifice
Equipped for short coupling with electric motor
990 rpm
2smomy
459 m³/h x 7 m
2000 Euro / piece
rotary pump
Manufacturer: Grundfos
Type: CRN 32-6 A-F-G-E-HQQE
Number: 96122305
Technical details:
Dimensions: approx. 325 x 1,450 x 360 mm (WxDxH)
Jvioou
Pump speed: 2,924 rpm
Nominal volume flow: 30 m³ / h
Nominal delivery head: 91.2 m
Number of wheels: 6
Shaft sealing: HQQE
Number of levels: 6
Pump housing: stainless steel
Type code for material: G
Elastomers: E
Maximum ambient temperature: 60 ° C
Weight: approx. 165 kg
Medium:...
Product condition New from old Stock
Scope of delivery with installation instruction and installation accessories
Packaging Originally packed
Manufacturer Pfannenberg
Guarantee in months 12
Pressure (pmax) 10 / 28 bar
Ynsx0
Frequency 50 / 60 Hz
Voltage 400 V AC
Current 4,2 A
Protection Class (IP) 54 / 34
Weight 91.23 kg
Stock location Rosenfeld
Stock ground Feld 10-L
System: Mobile dewatering system on trailer
Type: Chamber filter press 500 x 500
Execution: filter press
Year of constr.: 2017 refurbished
Number of plates: 5 + head and end plate
Filter plates: PP
Filter cloths: optionally available in voting on the medium
Presses contents: approx. 130 dm3
Filter pressure: 15 PSI
Material: product-contacting parts flange, traverses stainless steel, PP or rubberized
Material: non-product-contacting parts stainless steel
Pump technology: In consultation
System: T...
Manufacturer KNOLL
Item condition New from stock
Scope of delivery With operating instructions
Housing Slight signs of storage, light scratches
Cg3jqatfe
Warranty in months 12
Pressure (pmax) 150 bar
Volume (max) 900 l/min
Shaft diameter 19 mm
Shaft end With key
Bolt circle diameter 146 mm
Weight 12.661 kg
Storage location Rosenfeld
Storage location P01E3-L
Grundfos sewage lifting station
H = 20 m
380-415V
6.5 / 5.5 kW
Bsyttu0tvp
weight; 157 kg
The set has:
2 flanged valves AVK BETA 200 DN80 PN16
and
2 wedge gate valves DN80 PN10
Used product
We offer delivery and installation of a water purification and desalination plant with a reverse osmosis system. The plant is very compact and has the following dimensions - length 7.5 meters, width 2.4 meters, height 2.5 meters. The plant is designed on the basis of PENTAIR CODELINE 80S30 ceramic membrane filters (USA) and KOCH TFC8040-HR-400 membrane filter elements (USA). One membrane filter contains 7 filter elements - membranes. There are 18 membrane filters in the installation. The total n...
EX motor 400V, 50 Hz 154 kW. 2750 m3/h each. Price includes the support. All were pumping before being replaced. The price is for the 3 pumps togheter. Overall dimensions: 11.50 x 2.40 x 2.20 M - 15000 KGS
2s72ua
DESCRIPTION
The demineralized water station is used to produce the so-called demi water using ion exchange technology.
The station consists of 3 columns
Strongly acid cation exchanger working in the sodium cycle,
Strongly basic anion exchanger working in the chloride cycle,
Carbon filter
Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads.
C7uyuklh
Rouezts
The columns are made of AISI316L steel
Netzsch NE 100 B Progressive cavity pump
Article no.: RE-HU-2019-1202-PE89 e
Product: Netzsch
Manufacturer: Netzsch
Type: NE 100 B
Machine-number: 203092
Kom.-Nr: 305198
Capacity: ca. 50m3/h
Motor: 11 kW
Vhrmid9f
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.