Used Heusinger Salmon for sale (14)

Condition: good (used), Marel SC90 Salmon Slicer Salmon Slicer Model: SC90 Silk Cut 11 D Cut slicer Single Lane With adjustable slice thickness and angle Up to 90 slices per minute Slice angle: 8-20 degree Laodpfx Asv Dmz Djmrec Dual frequency 50/60Hz

Condition: used, Year of construction: 2010, functionality: unexamined, For sale: Conveyor belt Marel Salmon A/S, type PPI top Conveyor, year of manufacture: 2010. Upper belt width: 290 mm, lower belt width: 560 mm, length: 9.4 m. Distance between lower and upper belt: 20 cm. Price negotiable. Net price: 2,200 euros. Laodeyuvgzjpfx Amrec

Condition: excellent (used), Rademaker block processor with Rondo make up line. Has been producing 'Salmon en croute' for major UK supermarkets. Whole line is in lovely condition and can obviously be easily adapted to run other products like pasties, sausage rolls etc. Laodpfx Asiabu Uomrsc Mainly used seasonally so only 11,800 running hours.

Condition: excellent (used), Geba HS 240 'long slice' slicer with very low running hours - less than 2,500. Available immediately. Laedpfx Ajk H H Dyemrjc

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button Laodeiky H Sspfx Amrjc ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Condition: excellent (used), Year of construction: 2018, Marel 2730 salmon filleting machine with back and belly trim The Marel MS 2730 is an automated salmon filleting machine designed to maximize yield and throughput, capable of processing up to 25 fish per minute. It features automated size adjustments via a touch screen, includes advanced back and belly trimming, and is built for easy operation and hygiene. The machine accommodates salmon from 1.5 to 8 kg, with optional kits available for smaller fish, and is part of Marel's larger processing solutions. Key Features and Capabilities Automated Processing: The MS 2730 automatically adjusts to different fish sizes and uses electronically controlled tools to maintain high quality and consistent results. High Throughput: It can fillet up to 25 salmon per minute, increasing production efficiency. Improved Yield: The design includes a set of circular knives that capture meat near the center bone, significantly increasing fillet yield. User-Friendly Operation: A multilingual color touch screen provides easy and safe control over all operations, with pre-programmed settings for different fish sizes. Compact Design: The machine has a compact footprint, allowing for easier integration into existing processing lines. Technical Specifications Fish Size: Standard 1.5 to 8 kg, with a kit available for fish as small as 500 g. Ljdpfx Ajy Aul Tjmrsac Water Consumption: Approximately 15 liters per minute. Power Requirements: Operates on 3 x 400V and requires a 3.3 kW power supply. Benefits for Processors Efficiency: Streamlines workflow with automated adjustments and high-speed processing. Quality & Yield: Produces high-quality fillets by including more meat and minimizing waste. Flexibility: Accommodates various fish sizes and is part of a larger, integrated system for comprehensive processing solutions. Cost-Effectiveness: Optimized water consumption reduces operating costs. The fish is fed into the machine belly down, which makes the infeed much easier and faster. An additional set of circular knives cuts the fish from vent to tail. This cut raises yield, as the meat close to the center bone is included in the fillets. For the belly bone cut, 4 sets of finger pressures secure maximum control of the fish and enable optimum cutting of both pre-rigor and post-rigor fillets. The result is high-quality fillets with higher yield and output. The MS 2730 automatically adjusts to various fish sizes, so there is no need to adjust once the program has been switched on. The MS2730 can process up to 25 fish per minute, depending on the length of the fish. With the built-in system for measuring the fish´s profile and size, the electronically controlled cutting tools can automatically adjust the filleting program to the fish´s size and shape. The result is higher throughput, quality and yield depending on trim specifications. With the optional small fish kit installed, the MS 2730 is capable of filleting fish weighing from 500 g up to 4 kg. Manufacturer: Marel Model: MS 2730 Year: 2018 Capacity: 25 fish per minute Fish size: 1,5-8 kg. Power Supply: 400/230V / 50 Hz Power: 5,5 kW Water consumption: 15 liter/min. Machine dimensions (LxWxH):  3.150x1.035x1.980 mm Machine weight: 1.000 kg.

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP Lodpfxef Arugj Amroac  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Type - CT 2612. Serial number - 98 949. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Laodey Swi Hopfx Amroc Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER: Lasdpfx Ajfdkb Esmrec  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Model - TAF-BG Filleting Machine. Serial number – 8047. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Lsdpey Rimzjfx Amrsac Condition – Very good - last used for production in summer 2025. Supplied with User Manual and spare knives.

Year of construction: 2015, condition: excellent (used), Hobart high speed steamer Laedofv Spcspfx Amrsc Model: 305GB Serial: 97-0215-148 2015, high speed steamer cooks 42 portions of salmon in 1 minute or 66 portions of tenderstem broccoli in 30seconds, offering exceptional accelerated cooking techniques, LED display, auto defrost, 27Kw, on mobile tray cooling rack, 3Ph

Condition: new, Year of construction: 2025, functionality: fully functional, Blanching bath with steam for Salmon pieces. Blanching area 3000 mm. Mesh belt width 600 mm. Fish loading at the entrance (manually) – Water supply from system D – 40 mm. Steam supply 30 mm, 6-8 bar 150gr. Bath with double wall (heated). Lids can be lifted. Two hatches in the side wall. T regulation from 70-95 grC, mesh belt speed adjustable - from the control cabinet Ventilation outlet for the bath 200mm. Cooling in the exit area - cold water from the system. Level overflow. Water level sensor in the bath - for filling the bath. Ljdpfx Amjv E Ec Nereac Steam heating - snake. Closed system. Knife at the end of the mesh belt (belt cleaning).

Condition: used, Suhner Needle Injector Model: S120F- 45 With filter Lodpfx Aeygxrdomrjac Ex fish factory, last used on salmon

Condition: good (used), Year of construction: 2013, Trio FTC Single Lane Pin Boner BAADER TRIO FTC Single-lane Automatic Pinbone Remover is a pinbone remover with automatic feeding. Pressure control by counter weight gives steady result. Customer Benefits:  • Automatic machine for small production • Stable pinboning result Ledpfx Aoxp Iabsmrsac • No need of large working area Manufacturer: Baader / Trio Model: A-PBR Year: 2013 Capacity: Up to 12 fillets/min Fish Species: Salmon, Trout, Lake Whitefish fresh / defrosted and smoked fillets Machine Dimensions LxWxH: 1.250x700x1.600 mm Machine Weight: 100 kg.